Add case to detect the rtl8187se card and its RF frontend.
In this case set also accordingly mac80211 queue number.
Signed-off-by: Andrea Merello <andrea.merello@xxxxxxxxx>
---
drivers/net/wireless/rtl818x/rtl8180/dev.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index a14dfd9..2046fe2 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -1740,6 +1740,12 @@ static int rtl8180_probe(struct pci_dev *pdev,
chip_name = "RTL8185vD";
priv->chip_family = RTL818X_CHIP_FAMILY_RTL8185;
break;
+
+ case RTL818X_TX_CONF_RTL8187SE:
+ chip_name = "RTL8187SE";
+ priv->chip_family = RTL818X_CHIP_FAMILY_RTL8187SE;
+ break;
+
default:
printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n",
pci_name(pdev), reg >> 25);
@@ -1753,7 +1759,10 @@ static int rtl8180_probe(struct pci_dev *pdev,
* with mac80211, however the beacon queue is an exception and it
* is mapped on the highst tx ring IDX.
*/
- dev->queues = RTL8180_NR_TX_QUEUES - 1;
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+ dev->queues = RTL8187SE_NR_TX_QUEUES - 1;
+ else
+ dev->queues = RTL8180_NR_TX_QUEUES - 1;
if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
@@ -1773,7 +1782,11 @@ static int rtl8180_probe(struct pci_dev *pdev,
break;
case 5: priv->rf = &grf5101_rf_ops;
break;
- case 9: priv->rf = rtl8180_detect_rf(dev);
+ case 9:
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+ priv->rf = rtl8187se_detect_rf(dev);
+ else
+ priv->rf = rtl8180_detect_rf(dev);
break;
case 10:
rf_name = "RTL8255";
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
