rtl8180 has one register for analog converters setting ,rtl8185 has
two and rtl8187se has three.
Setting those registers require more than a simple write, and for
one of them a function is already provided.
This patch introduces functions for the other two.
rtl8187se will use them. rtl8185 doesen't yet, but should
Signed-off-by: Andrea Merello <andrea.merello@xxxxxxxxx>
---
drivers/net/wireless/rtl818x/rtl8180/dev.c | 40 ++++++++++++++++++++++++++
drivers/net/wireless/rtl818x/rtl8180/rtl8180.h | 1 +
drivers/net/wireless/rtl818x/rtl8180/rtl8225.c | 1 +
3 files changed, 42 insertions(+)
diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 740a583..a3b67e6 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -523,6 +523,46 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
}
}
+static void rtl8180_set_anaparam3(struct rtl8180_priv *priv, u16 anaparam3)
+{
+ u8 reg;
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_CONFIG);
+
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+ reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+ rtl818x_iowrite16(priv, &priv->map->ANAPARAM3, anaparam3);
+
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+ reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_NORMAL);
+}
+
+void rtl8180_set_anaparam2(struct rtl8180_priv *priv, u32 anaparam2)
+{
+ u8 reg;
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_CONFIG);
+
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+ reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, anaparam2);
+
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3,
+ reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+ RTL818X_EEPROM_CMD_NORMAL);
+}
+
void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
{
u8 reg;
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
index d8f92de..0ef3fc7 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
@@ -145,6 +145,7 @@ struct rtl8180_priv {
void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam);
+void rtl8180_set_anaparam2(struct rtl8180_priv *priv, u32 anaparam2);
static inline u8 rtl818x_ioread8(struct rtl8180_priv *priv, u8 __iomem *addr)
{
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c b/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c
index 1c0fe23..9bda5bc 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c
@@ -282,6 +282,7 @@ static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
msleep(1); /* FIXME: optional? */
+ /* TODO: use set_anaparam2 dev.c_func*/
/* anaparam2 on */
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
