This patch set contains all the modifications/adds that finally
make rtl8187se work with rtl8180 driver
Andrea Merello (20):
rtl818x: add registers for rtl8187se
rtl8180: add rtl8187se chip type
rtl8180: add rtl8187se fields to TX descriptor
rtl8180: add basic rate configuration support for rtl8187se
rtl8180: support for rtl8187se RX descriptors
rtl8180: add ISR for rtl8187se
rtl8180: introduce functions to enable/disable ints and add support
for rtl8187se
rtl8180: don't write MAR registers for rtl8187se
rtl8180: add TX queue mapping and support for rtl8187se
rtl8180: config carbus register for rtl8187se
rtl8180: add rtl8187se params to eeprom reading
rtl8180: introduce functions for setting ANAPARAM 2 and 3 params
rtl8180: add RF code for rtl8225 zebra v4
rtl8180: add rtl8187se HW initialization
rtl8180: add ERP configuration for rtl8187se
rtl8180: make sure RTL818X_MSR_ENEDCA is set for rtl8187se
rtl8180: add WMM parameters configuration for rtl8187se
rtl8180: detect rtl8187se card
rtl8180: enable rtl8187se support
rtl818x: Update Kconfig for rtl8187se
drivers/net/wireless/rtl818x/Kconfig | 4 +-
drivers/net/wireless/rtl818x/rtl8180/Makefile | 2 +-
drivers/net/wireless/rtl818x/rtl8180/dev.c | 637 +++++++++++++++++++++--
drivers/net/wireless/rtl818x/rtl8180/rtl8180.h | 59 ++-
drivers/net/wireless/rtl818x/rtl8180/rtl8225.c | 1 +
drivers/net/wireless/rtl818x/rtl8180/rtl8225se.c | 475 +++++++++++++++++
drivers/net/wireless/rtl818x/rtl8180/rtl8225se.h | 61 +++
drivers/net/wireless/rtl818x/rtl818x.h | 266 ++++++++--
8 files changed, 1389 insertions(+), 116 deletions(-)
create mode 100644 drivers/net/wireless/rtl818x/rtl8180/rtl8225se.c
create mode 100644 drivers/net/wireless/rtl818x/rtl8180/rtl8225se.h
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
