On 03/24/2014 01:24 PM, Janusz Dziedzic wrote: > RSSI and RATES fields are valid only when START_VALID > bit is set. So, in current implementation we have to > remember/caclulate them when START_VALID and report the same > when only END_VALID is set. > Currently during heavy traffic we could have: > - 10 packets with START_VALID - correct RSSI and RATES > - 10 packets with END_VALID > - 10 packets with START_VALID - correct RSSI and RATES > - 10 packets with END_VALID I applied all 8 of these patches to my tree, and it does fix the problems I saw with rx-rate and signal being broken (perhaps because I am using raw rx mode for my stations). I'll leave these in my tree and will let you know if I see any problems that might be related to them. Thanks, Ben -- Ben Greear <greearb@xxxxxxxxxxxxxxx> Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
