From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx> The registers for temperature compensation need to be programmed only for active chains. Use the TX chainmask to make sure that this is done properly for QCA953x. Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx> --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 59 +++++++++++++++----------- 1 file changed, 35 insertions(+), 24 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index d7625ec..235053b 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -4792,43 +4792,54 @@ static void ar9003_hw_power_control_override(struct ath_hw *ah, tempslope: if (AR_SREV_9550(ah) || AR_SREV_9531(ah)) { + u8 txmask = (eep->baseEepHeader.txrxMask & 0xf0) >> 4; + /* * AR955x has tempSlope register for each chain. * Check whether temp_compensation feature is enabled or not. */ if (eep->baseEepHeader.featureEnable & 0x1) { if (frequency < 4000) { - REG_RMW_FIELD(ah, AR_PHY_TPC_19, - AR_PHY_TPC_19_ALPHA_THERM, - eep->base_ext2.tempSlopeLow); - REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1, - AR_PHY_TPC_19_ALPHA_THERM, - temp_slope); - REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2, - AR_PHY_TPC_19_ALPHA_THERM, - eep->base_ext2.tempSlopeHigh); + if (txmask & BIT(0)) + REG_RMW_FIELD(ah, AR_PHY_TPC_19, + AR_PHY_TPC_19_ALPHA_THERM, + eep->base_ext2.tempSlopeLow); + if (txmask & BIT(1)) + REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1, + AR_PHY_TPC_19_ALPHA_THERM, + temp_slope); + if (txmask & BIT(2)) + REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2, + AR_PHY_TPC_19_ALPHA_THERM, + eep->base_ext2.tempSlopeHigh); } else { - REG_RMW_FIELD(ah, AR_PHY_TPC_19, - AR_PHY_TPC_19_ALPHA_THERM, - temp_slope); - REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1, - AR_PHY_TPC_19_ALPHA_THERM, - temp_slope1); - REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2, - AR_PHY_TPC_19_ALPHA_THERM, - temp_slope2); + if (txmask & BIT(0)) + REG_RMW_FIELD(ah, AR_PHY_TPC_19, + AR_PHY_TPC_19_ALPHA_THERM, + temp_slope); + if (txmask & BIT(1)) + REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1, + AR_PHY_TPC_19_ALPHA_THERM, + temp_slope1); + if (txmask & BIT(2)) + REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2, + AR_PHY_TPC_19_ALPHA_THERM, + temp_slope2); } } else { /* * If temp compensation is not enabled, * set all registers to 0. */ - REG_RMW_FIELD(ah, AR_PHY_TPC_19, - AR_PHY_TPC_19_ALPHA_THERM, 0); - REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1, - AR_PHY_TPC_19_ALPHA_THERM, 0); - REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2, - AR_PHY_TPC_19_ALPHA_THERM, 0); + if (txmask & BIT(0)) + REG_RMW_FIELD(ah, AR_PHY_TPC_19, + AR_PHY_TPC_19_ALPHA_THERM, 0); + if (txmask & BIT(1)) + REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1, + AR_PHY_TPC_19_ALPHA_THERM, 0); + if (txmask & BIT(2)) + REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2, + AR_PHY_TPC_19_ALPHA_THERM, 0); } } else { REG_RMW_FIELD(ah, AR_PHY_TPC_19, -- 1.9.0 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html