On older chips, the INI value differ in similar ways as cycpwr_thr1, so
convert it to absolute values as well.
Since the ANI algorithm is different here compared to the old
implementation (fewer steps, controlled at a different point in time),
it makes sense to use values similar to what would be applied for newer
chips, just without relying on INI defaults.
Signed-off-by: Felix Fietkau <nbd@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar5008_phy.c | 41 ++++-------------------------
1 file changed, 5 insertions(+), 36 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index 504e189..3b3e910 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -917,7 +917,7 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_channel *chan = ah->curchan;
struct ar5416AniState *aniState = &ah->ani;
- s32 value, value2;
+ s32 value;
switch (cmd & ah->ani_function) {
case ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION:{
@@ -1004,42 +1004,11 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
case ATH9K_ANI_FIRSTEP_LEVEL:{
u32 level = param;
- if (level >= ARRAY_SIZE(firstep_table)) {
- ath_dbg(common, ANI,
- "ATH9K_ANI_FIRSTEP_LEVEL: level out of range (%u > %zu)\n",
- level, ARRAY_SIZE(firstep_table));
- return false;
- }
-
- /*
- * make register setting relative to default
- * from INI file & cap value
- */
- value = firstep_table[level] -
- firstep_table[ATH9K_ANI_FIRSTEP_LVL] +
- aniState->iniDef.firstep;
- if (value < ATH9K_SIG_FIRSTEP_SETTING_MIN)
- value = ATH9K_SIG_FIRSTEP_SETTING_MIN;
- if (value > ATH9K_SIG_FIRSTEP_SETTING_MAX)
- value = ATH9K_SIG_FIRSTEP_SETTING_MAX;
+ value = level * 2;
REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
- AR_PHY_FIND_SIG_FIRSTEP,
- value);
- /*
- * we need to set first step low register too
- * make register setting relative to default
- * from INI file & cap value
- */
- value2 = firstep_table[level] -
- firstep_table[ATH9K_ANI_FIRSTEP_LVL] +
- aniState->iniDef.firstepLow;
- if (value2 < ATH9K_SIG_FIRSTEP_SETTING_MIN)
- value2 = ATH9K_SIG_FIRSTEP_SETTING_MIN;
- if (value2 > ATH9K_SIG_FIRSTEP_SETTING_MAX)
- value2 = ATH9K_SIG_FIRSTEP_SETTING_MAX;
-
+ AR_PHY_FIND_SIG_FIRSTEP, value);
REG_RMW_FIELD(ah, AR_PHY_FIND_SIG_LOW,
- AR_PHY_FIND_SIG_FIRSTEP_LOW, value2);
+ AR_PHY_FIND_SIG_FIRSTEP_LOW, value);
if (level != aniState->firstepLevel) {
ath_dbg(common, ANI,
@@ -1056,7 +1025,7 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
aniState->firstepLevel,
level,
ATH9K_ANI_FIRSTEP_LVL,
- value2,
+ value,
aniState->iniDef.firstepLow);
if (level > aniState->firstepLevel)
ah->stats.ast_ani_stepup++;
--
1.8.3.4 (Apple Git-47)
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
