Hi!
I'm the owner of a Asus Zenbook UX31E, and I'm running kubuntu 12.04 on it.
Unfortunately the wirelesscard on it keeps dropping the connection, and
it's not possible to reconnect until reboot. I've been trying to observe
when it happens, and I think it's mostly when it's running on batterypower.
dmesg gave me this:
[46290.238747] ath: phy0: Chip reset failed
[46290.238748] ath: phy0: Unable to reset channel, reset status -22
[46290.238756] ath: phy0: Unable to set channel
[46290.302254] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[46290.313546] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff
AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[46290.313558] ath: phy0: Could not stop RX, we could be confusing the
DMA engine when we start RX up
[46290.427570] ath: phy0: Chip reset failed
[46290.427573] ath: phy0: Unable to reset channel, reset status -22
[46290.427581] ath: phy0: Unable to set channel
[46290.491212] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[46290.502580] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff
AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[46290.502588] ath: phy0: Could not stop RX, we could be confusing the
DMA engine when we start RX up
[46290.616192] ath: phy0: Chip reset failed
[46290.616195] ath: phy0: Unable to reset channel, reset status -22
[46290.616204] ath: phy0: Unable to set channel
[46290.679691] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[46290.691075] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff
AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[46290.691082] ath: phy0: Could not stop RX, we could be confusing the
DMA engine when we start RX up
[46290.805144] ath: phy0: Chip reset failed
[46290.805146] ath: phy0: Unable to reset channel, reset status -22
[46290.805153] ath: phy0: Unable to set channel
[46290.868573] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[46290.879963] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff
AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[46290.879971] ath: phy0: Could not stop RX, we could be confusing the
DMA engine when we start RX up
[46290.993647] ath: phy0: Chip reset failed
[46290.993651] ath: phy0: Unable to reset channel, reset status -22
[46290.993669] ath: phy0: Unable to set channel
[46291.057267] ath: phy0: Failed to stop TX DMA, queues=0x18f!
[46291.068574] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff
AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
[46291.068582] ath: phy0: Could not stop RX, we could be confusing the
DMA engine when we start RX up
[46291.182637] ath: phy0: Chip reset failed
[46291.182639] ath: phy0: Unable to reset channel, reset status -22
[46291.182653] ath: phy0: Unable to set channel
[46291.296484] ath: phy0: RX failed to go idle in 10 ms RXSM=0xffffffff
[46291.307837] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff
AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
lspci:
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset
Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 4 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation QS67 Express Chipset Family LPC
Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset
Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller (rev 05)
02:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network
Adapter (rev 01)
03:00.0 USB controller: Fresco Logic FL1009 USB 3.0 Host Controller (rev 02)
lsmod:
pci_stub 12622 1
vboxpci 23237 0
vboxnetadp 13382 0
vboxnetflt 23478 0
vboxdrv 287130 3 vboxpci,vboxnetadp,vboxnetflt
dm_crypt 23125 1
snd_hda_codec_hdmi 32530 1
snd_hda_codec_realtek 224173 1
joydev 17693 0
rts5139 351188 0
uvcvideo 72627 0
videodev 98259 1 uvcvideo
v4l2_compat_ioctl32 17128 1 videodev
ath3k 12961 0
btusb 18332 1
asus_nb_wmi 12710 0
asus_wmi 24456 1 asus_nb_wmi
sparse_keymap 13890 1 asus_wmi
snd_hda_intel 33719 3
snd_hda_codec 127706 3
snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 17764 1 snd_hda_codec
snd_pcm 97275 3
snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
arc4 12529 2
ath9k 101495 0
snd_seq_midi 13324 0
mac80211 573177 1 ath9k
psmouse 97519 0
snd_rawmidi 30748 1 snd_seq_midi
ath9k_common 13792 1 ath9k
serio_raw 13211 0
ath9k_hw 432022 2 ath9k,ath9k_common
snd_seq_midi_event 14899 1 snd_seq_midi
snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event
ath 23827 3 ath9k,ath9k_common,ath9k_hw
cfg80211 567517 3 ath9k,mac80211,ath
snd_timer 29990 2 snd_pcm,snd_seq
snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq
compat 30258 5
ath9k,mac80211,ath9k_common,ath9k_hw,cfg80211
snd 79041 16
snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
bnep 18281 2
soundcore 15091 1 snd
snd_page_alloc 18529 2 snd_hda_intel,snd_pcm
rfcomm 47604 16
mac_hid 13253 0
bluetooth 180113 24 ath3k,btusb,bnep,rfcomm
parport_pc 32866 0
mei 41616 0
ppdev 17113 0
binfmt_misc 17540 1
lp 17799 0
parport 46562 3 parport_pc,ppdev,lp
wmi 19256 1 asus_wmi
i915 478556 3
drm_kms_helper 46978 1 i915
drm 241971 4 i915,drm_kms_helper
i2c_algo_bit 13423 1 i915
video 19651 1 i915
uname -a:
Linux aril-UX31E 3.2.0-60-generic #91-Ubuntu SMP Wed Feb 19 03:54:44 UTC
2014 x86_64 x86_64 x86_64 GNU/Linux
And I'm using backports-modules:
linux-backports-modules-cw-3.12-precise-generic
Hope this info is helpful, and please don't hesitate to tell me what
other info you need or if I can help in any other way.
Thank you!
Aril Tønnessen
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html