In commit f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 entitled "rtlwifi:
rtl8192ce: Fix too long disable of IRQs", Olivier Langlois
<olivier@xxxxxxxxxxxxxx> fixed a problem caused by an extra long disabling
of interrupts. This patch makes the same fix for rtl8192se.
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Cc: Stable <stable@xxxxxxxxxxxxxxx>
---
drivers/net/wireless/rtlwifi/rtl8192se/hw.c | 27 +++++++++++++++++++++------
1 file changed, 21 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
index 7c4b39c..3015af1 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
@@ -955,7 +955,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
u8 tmp_byte = 0;
-
+ unsigned long flags;
bool rtstatus = true;
u8 tmp_u1b;
int err = false;
@@ -967,6 +967,16 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
rtlpci->being_init_adapter = true;
+ /* As this function can take a very long time (up to 350 ms)
+ * and can be called with irqs disabled, reenable the irqs
+ * to let the other devices continue being serviced.
+ *
+ * It is safe doing so since our own interrupts will only be enabled
+ * in a subsequent step.
+ */
+ local_save_flags(flags);
+ local_irq_enable();
+
rtlpriv->intf_ops->disable_aspm(hw);
/* 1. MAC Initialize */
@@ -984,7 +994,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
"Failed to download FW. Init HW without FW now... "
"Please copy FW into /lib/firmware/rtlwifi\n");
- return 1;
+ err = 1;
+ goto exit;
}
/* After FW download, we have to reset MAC register */
@@ -997,7 +1008,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
/* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
if (!rtl92s_phy_mac_config(hw)) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n");
- return rtstatus;
+ err = rtstatus;
+ goto exit;
}
/* because last function modify RCR, so we update
@@ -1016,7 +1028,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
/* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
if (!rtl92s_phy_bb_config(hw)) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n");
- return rtstatus;
+ err = rtstatus;
+ goto exit;
}
/* 5. Initiailze RF RAIO_A.txt RF RAIO_B.txt */
@@ -1033,7 +1046,8 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
if (!rtl92s_phy_rf_config(hw)) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "RF Config failed\n");
- return rtstatus;
+ err = rtstatus;
+ goto exit;
}
/* After read predefined TXT, we must set BB/MAC/RF
@@ -1122,8 +1136,9 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_ON);
rtl92s_dm_init(hw);
+exit:
+ local_irq_restore(flags);
rtlpci->being_init_adapter = false;
-
return err;
}
--
1.8.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
