From: Fariya Fatima
This patch has the remaining functions which prepare management
frames internal to the device.
Signed-off-by: Fariya Fatima <fariya.f@xxxxxxxxxxxxxxxxxx>
---
rsi_91x_mgmt.c | 738 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 738 insertions(+)
diff -rupN linux-3.14-rc5/drivers/net/wireless/rsi/rsi_91x_mgmt.c linux-3.14-rc5_new/drivers/net/wireless/rsi/rsi_91x_mgmt.c
--- linux-3.14-rc5/drivers/net/wireless/rsi/rsi_91x_mgmt.c 2014-03-04 07:37:17.533276887 +0545
+++ linux-3.14-rc5_new/drivers/net/wireless/rsi/rsi_91x_mgmt.c 2014-03-04 07:37:20.075245108 +0545
@@ -558,4 +558,742 @@ int rsi_send_aggregation_params_frame(st
return rsi_send_internal_mgmt_frame(common, skb);
}
+/**
+ * This function starts base band and RF programming.
+ * This is called after initial configurations are done.
+ *
+ * @param common Pointer to the driver private structure.
+ * @return 0 on success, corresponding negative error code on failure.
+ */
+static int rsi_program_bb_rf(struct rsi_common *common)
+{
+ struct sk_buff *skb;
+ struct rsi_mac_frame *mgmt_frame;
+ rsi_dbg(MGMT_TX_ZONE, "%s: Sending program BB/RF frame\n", __func__);
+
+ skb = dev_alloc_skb(FRAME_DESC_SZ);
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -1;
+ }
+
+ memset(skb->data, 0, FRAME_DESC_SZ);
+ mgmt_frame = (struct rsi_mac_frame *)skb->data;
+
+ mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
+ mgmt_frame->desc_word[1] = cpu_to_le16(BBP_PROG_IN_TA);
+ mgmt_frame->desc_word[4] = cpu_to_le16(common->endpoint << 8);
+
+ if (common->rf_reset) {
+ mgmt_frame->desc_word[7] = cpu_to_le16(RF_RESET_ENABLE);
+ rsi_dbg(MGMT_TX_ZONE, "%s: ===> RF RESET REQUEST SENT <===\n",
+ __func__);
+ common->rf_reset = 0;
+ }
+ common->bb_rf_prog_count = 1;
+ mgmt_frame->desc_word[7] |= cpu_to_le16(PUT_BBP_RESET |
+ BBP_REG_WRITE | (RSI_RF_TYPE << 4));
+ skb_put(skb, FRAME_DESC_SZ);
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * This function sends vap capabilities to firmware.
+ *
+ * @param common Pointer to the driver private structure.
+ * @param opmode Operating mode of device.
+ * @return 0 on success, corresponding negative error code on failure.
+ */
+int rsi_set_vap_capabilities(struct rsi_common *common, enum opmode mode)
+{
+ struct sk_buff *skb = NULL;
+ struct rsi_vap_caps *vap_caps;
+ u16 vap_id = 0;
+
+ rsi_dbg(MGMT_TX_ZONE, "%s: Sending VAP capabilities frame\n", __func__);
+
+ skb = dev_alloc_skb(sizeof(struct rsi_vap_caps));
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -1;
+ }
+
+ memset(skb->data, 0, sizeof(struct rsi_vap_caps));
+ vap_caps = (struct rsi_vap_caps *)skb->data;
+
+ vap_caps->desc_word[0] = cpu_to_le16((sizeof(struct rsi_vap_caps) -
+ FRAME_DESC_SZ) |
+ (RSI_WIFI_MGMT_Q << 12));
+ vap_caps->desc_word[1] = cpu_to_le16(VAP_CAPABILITIES);
+ vap_caps->desc_word[4] = cpu_to_le16(mode |
+ (common->channel_width << 8));
+ vap_caps->desc_word[7] = cpu_to_le16((vap_id << 8) |
+ (common->mac_id << 4) |
+ common->radio_id);
+
+ memcpy(vap_caps->mac_addr, common->mac_addr, IEEE80211_ADDR_LEN);
+ vap_caps->keep_alive_period = cpu_to_le16(90);
+ vap_caps->frag_threshold = cpu_to_le16(IEEE80211_MAX_FRAG_THRESHOLD);
+
+ vap_caps->rts_threshold = cpu_to_le16(common->rts_threshold);
+ vap_caps->default_mgmt_rate = 0;
+ if (conf_is_ht40(&common->priv->hw->conf)) {
+ vap_caps->default_ctrl_rate =
+ cpu_to_le32(RSI_RATE_6 | FULL40M_ENABLE << 16);
+ } else {
+ vap_caps->default_ctrl_rate = cpu_to_le32(RSI_RATE_6);
+ }
+ vap_caps->default_data_rate = 0;
+ vap_caps->beacon_interval = cpu_to_le16(200);
+ vap_caps->dtim_period = cpu_to_le16(4);
+
+ skb_put(skb, sizeof(*vap_caps));
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * This function is used to load the keys within the firmware.
+ *
+ * @param common Pointer to the driver private structure.
+ * @param data Pointer to the key data.
+ * @param key_len Key length to be loaded.
+ * @param key_type Type of key: GROUP/PAIRWISE.
+ * @param key_id Key index.
+ * @param cipher Type of cipher used.
+ * @return 0 on success, -1 on failure.
+ */
+int rsi_hal_load_key(struct rsi_common *common,
+ u8 *data,
+ u16 key_len,
+ u8 key_type,
+ u8 key_id,
+ u32 cipher)
+{
+ struct sk_buff *skb = NULL;
+ struct rsi_set_key *set_key;
+ u16 key_descriptor = 0;
+
+ rsi_dbg(MGMT_TX_ZONE, "%s: Sending load key frame\n", __func__);
+
+ skb = dev_alloc_skb(sizeof(struct rsi_set_key));
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -1;
+ }
+
+ memset(skb->data, 0, sizeof(struct rsi_set_key));
+ set_key = (struct rsi_set_key *)skb->data;
+
+ if ((cipher == WLAN_CIPHER_SUITE_WEP40) ||
+ (cipher == WLAN_CIPHER_SUITE_WEP104)) {
+ key_len += 1;
+ key_descriptor |= BIT(2);
+ if (key_len >= 13)
+ key_descriptor |= BIT(3);
+ } else if (cipher != KEY_TYPE_CLEAR) {
+ key_descriptor |= BIT(4);
+ if (key_type == RSI_PAIRWISE_KEY)
+ key_id = 0;
+ if (cipher == WLAN_CIPHER_SUITE_TKIP)
+ key_descriptor |= BIT(5);
+ }
+ key_descriptor |= (key_type | BIT(13) | (key_id << 14));
+
+ set_key->desc_word[0] = cpu_to_le16((sizeof(struct rsi_set_key) -
+ FRAME_DESC_SZ) |
+ (RSI_WIFI_MGMT_Q << 12));
+ set_key->desc_word[1] = cpu_to_le16(SET_KEY_REQ);
+ set_key->desc_word[4] = cpu_to_le16(key_descriptor);
+
+ if ((cipher == WLAN_CIPHER_SUITE_WEP40) ||
+ (cipher == WLAN_CIPHER_SUITE_WEP104)) {
+ memcpy(&set_key->key[key_id][1],
+ data,
+ key_len * 2);
+ } else {
+ memcpy(&set_key->key[0][0], data, key_len);
+ }
+
+ memcpy(set_key->tx_mic_key, &data[16], 8);
+ memcpy(set_key->rx_mic_key, &data[24], 8);
+
+ skb_put(skb, sizeof(struct rsi_set_key));
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/*
+ * This function sends bootup parameters to the firmware.
+ *
+ * @param common Pointer to the driver private structure.
+ * @return 0 on success, corresponding error code on failure.
+ */
+static u8 rsi_load_bootup_params(struct rsi_common *common)
+{
+ struct sk_buff *skb;
+ struct rsi_boot_params *boot_params;
+
+ rsi_dbg(MGMT_TX_ZONE, "%s: Sending boot params frame\n", __func__);
+ skb = dev_alloc_skb(sizeof(struct rsi_boot_params));
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -1;
+ }
+
+ memset(skb->data, 0, sizeof(struct rsi_boot_params));
+ boot_params = (struct rsi_boot_params *)skb->data;
+
+ rsi_dbg(MGMT_TX_ZONE, "%s:\n", __func__);
+
+ if (common->channel_width == BW_40MHZ) {
+ memcpy(&boot_params->bootup_params,
+ &boot_params_40,
+ sizeof(struct bootup_params));
+ rsi_dbg(MGMT_TX_ZONE, "%s: Packet 40MHZ <=== %d\n", __func__,
+ UMAC_CLK_40BW);
+ boot_params->desc_word[7] = cpu_to_le16(UMAC_CLK_40BW);
+ } else {
+ memcpy(&boot_params->bootup_params,
+ &boot_params_20,
+ sizeof(struct bootup_params));
+ if (boot_params_20.valid != cpu_to_le32(VALID_20)) {
+ boot_params->desc_word[7] = cpu_to_le16(UMAC_CLK_20BW);
+ rsi_dbg(MGMT_TX_ZONE,
+ "%s: Packet 20MHZ <=== %d\n", __func__,
+ UMAC_CLK_20BW);
+ } else {
+ boot_params->desc_word[7] = cpu_to_le16(UMAC_CLK_40MHZ);
+ rsi_dbg(MGMT_TX_ZONE,
+ "%s: Packet 20MHZ <=== %d\n", __func__,
+ UMAC_CLK_40MHZ);
+ }
+ }
+
+ /**
+ * Bit{0:11} indicates length of the Packet
+ * Bit{12:15} indicates host queue number
+ */
+ boot_params->desc_word[0] = cpu_to_le16(sizeof(struct bootup_params) |
+ (RSI_WIFI_MGMT_Q << 12));
+ boot_params->desc_word[1] = cpu_to_le16(BOOTUP_PARAMS_REQUEST);
+
+ skb_put(skb, sizeof(struct rsi_boot_params));
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * This function prepares reset MAC request and sends an internal
+ * management frame to indicate it to firmware.
+ *
+ * @param common Pointer to the driver private structure.
+ * @return 0 on success, corresponding error code on failure.
+ */
+static int rsi_send_reset_mac(struct rsi_common *common)
+{
+ struct sk_buff *skb;
+ struct rsi_mac_frame *mgmt_frame;
+
+ rsi_dbg(MGMT_TX_ZONE, "%s: Sending reset MAC frame\n", __func__);
+
+ skb = dev_alloc_skb(FRAME_DESC_SZ);
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -1;
+ }
+
+ memset(skb->data, 0, FRAME_DESC_SZ);
+ mgmt_frame = (struct rsi_mac_frame *)skb->data;
+
+ mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
+ mgmt_frame->desc_word[1] = cpu_to_le16(RESET_MAC_REQ);
+ mgmt_frame->desc_word[4] = cpu_to_le16(RETRY_COUNT << 8);
+
+ skb_put(skb, FRAME_DESC_SZ);
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * This function programs the channel.
+ *
+ * @param common Pointer to the driver private structure.
+ * @param channel Channel value to be set.
+ * @return 0 on success, corresponding error code on failure.
+ */
+int rsi_set_channel(struct rsi_common *common, u16 channel)
+{
+ struct sk_buff *skb = NULL;
+ struct rsi_mac_frame *mgmt_frame;
+
+ rsi_dbg(MGMT_TX_ZONE,
+ "%s: Sending scan req frame\n", __func__);
+
+ skb = dev_alloc_skb(FRAME_DESC_SZ);
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -1;
+ }
+
+ memset(skb->data, 0, FRAME_DESC_SZ);
+ mgmt_frame = (struct rsi_mac_frame *)skb->data;
+
+ if (common->band == IEEE80211_BAND_5GHZ) {
+ if ((channel >= 36) && (channel <= 64))
+ channel = ((channel - 32) / 4);
+ else if ((channel > 64) && (channel <= 140))
+ channel = ((channel - 102) / 4) + 8;
+ else if (channel >= 149)
+ channel = ((channel - 151) / 4) + 18;
+ else
+ return -1;
+ } else {
+ if (channel > 14) {
+ rsi_dbg(ERR_ZONE, "%s: Invalid chno %d, band = %d\n",
+ __func__, channel, common->band);
+ return 0;
+ }
+ }
+
+ mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
+ mgmt_frame->desc_word[1] = cpu_to_le16(SCAN_REQUEST);
+ mgmt_frame->desc_word[4] = cpu_to_le16(channel);
+
+ mgmt_frame->desc_word[7] = cpu_to_le16(PUT_BBP_RESET |
+ BBP_REG_WRITE |
+ (RSI_RF_TYPE << 4));
+
+ mgmt_frame->desc_word[5] = cpu_to_le16(0x01);
+
+ if (common->channel_width == BW_40MHZ)
+ mgmt_frame->desc_word[5] |= cpu_to_le16(0x1 << 8);
+
+ common->channel = channel;
+
+ skb_put(skb, FRAME_DESC_SZ);
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * This function is used to compare two integers
+ *
+ * @param pointer to the first integer
+ * @param pointer to the second integer
+ * @return 0 if both are equal, -1 if the first is smaller, else 1
+ */
+static int rsi_compare(const void *a, const void *b)
+{
+ u16 _a = *(const u16 *)(a);
+ u16 _b = *(const u16 *)(b);
+
+ if (_a > _b)
+ return -1;
+
+ if (_a < _b)
+ return 1;
+
+ return 0;
+}
+
+/**
+ * This function is used to map the selected rates to hw rates
+ *
+ * @param the standard rate to be mapped
+ * @param offset that will be returned
+ * @return 0 if it is a mcs rate, else 1
+ */
+static bool rsi_map_rates(u16 rate, int *offset)
+{
+ int kk;
+ for (kk = 0; kk < ARRAY_SIZE(rsi_mcsrates); kk++) {
+ if (rate == mcs[kk]) {
+ *offset = kk;
+ return 0;
+ }
+ }
+
+ for (kk = 0; kk < ARRAY_SIZE(rsi_rates); kk++) {
+ if (rate == rsi_rates[kk].bitrate / 5) {
+ *offset = kk;
+ break;
+ }
+ }
+ return 1;
+}
+
+/**
+ * This function is to set rates for connection and send autorate
+ * request to firmware.
+ *
+ * @param common Pointer to the driver private structure.
+ * @return 0 on success, corresponding error code on failure.
+ */
+static int rsi_send_auto_rate_request(struct rsi_common *common)
+{
+ struct sk_buff *skb;
+ struct rsi_auto_rate *auto_rate;
+ int ii = 0, jj = 0, kk = 0;
+ struct ieee80211_hw *hw = common->priv->hw;
+ u8 band = hw->conf.chandef.chan->band;
+ u8 num_supported_rates = 0;
+ u8 rate_offset = 0;
+ u32 rate_bitmap = common->bitrate_mask[band];
+
+ u16 *selected_rates, min_rate;
+
+ skb = dev_alloc_skb(sizeof(struct rsi_auto_rate));
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -1;
+ }
+
+ selected_rates = kmalloc(2 * RSI_TBL_SZ, GFP_KERNEL);
+ if (!selected_rates) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of mem\n",
+ __func__);
+ return -1;
+ }
+
+ memset(skb->data, 0, sizeof(struct rsi_auto_rate));
+ memset(selected_rates, 0, 2 * RSI_TBL_SZ);
+
+ auto_rate = (struct rsi_auto_rate *)skb->data;
+
+ auto_rate->aarf_rssi = cpu_to_le16(((u16)3 << 6) | (u16)(18 & 0x3f));
+ auto_rate->collision_tolerance = cpu_to_le16(3);
+ auto_rate->failure_limit = cpu_to_le16(3);
+ auto_rate->initial_boundary = cpu_to_le16(3);
+ auto_rate->max_threshold_limt = cpu_to_le16(27);
+
+ auto_rate->desc_word[1] = cpu_to_le16(AUTO_RATE_IND);
+
+ if (common->channel_width == BW_40MHZ)
+ auto_rate->desc_word[7] |= cpu_to_le16(1);
+
+ if (band == IEEE80211_BAND_2GHZ)
+ min_rate = STD_RATE_01;
+ else
+ min_rate = STD_RATE_06;
+
+ for (ii = 0, jj = 0; ii < ARRAY_SIZE(rsi_rates); ii++) {
+ if (rate_bitmap & BIT(ii)) {
+ selected_rates[jj++] = (rsi_rates[ii].bitrate / 5);
+ rate_offset++;
+ }
+ }
+ num_supported_rates = jj;
+
+ if (common->vif_info[0].is_ht) {
+ for (ii = 0; ii < ARRAY_SIZE(mcs); ii++)
+ selected_rates[jj++] = mcs[ii];
+ num_supported_rates += ARRAY_SIZE(mcs);
+ rate_offset += ARRAY_SIZE(mcs);
+ }
+
+ if (rate_offset < (RSI_TBL_SZ / 2) - 1) {
+ for (ii = jj; ii < (RSI_TBL_SZ / 2); ii++) {
+ selected_rates[jj++] = min_rate;
+ rate_offset++;
+ }
+ }
+
+ sort(selected_rates, jj, sizeof(u16), &rsi_compare, NULL);
+
+ /* mapping the rates to RSI rates */
+ for (ii = 0; ii < jj; ii++) {
+ if (rsi_map_rates(selected_rates[ii], &kk)) {
+ auto_rate->supported_rates[ii] =
+ cpu_to_le16(rsi_rates[kk].hw_value);
+ } else {
+ auto_rate->supported_rates[ii] =
+ cpu_to_le16(rsi_mcsrates[kk]);
+ }
+ }
+
+ /* loading HT rates in the bottom half of the auto rate table */
+ if (common->vif_info[0].is_ht) {
+ if (common->vif_info[0].sgi)
+ auto_rate->supported_rates[rate_offset++] =
+ cpu_to_le16(RSI_RATE_MCS7_SG);
+
+ for (ii = rate_offset, kk = ARRAY_SIZE(rsi_mcsrates) - 1;
+ ii < rate_offset + 2 * ARRAY_SIZE(rsi_mcsrates); ii++) {
+ if (common->vif_info[0].sgi)
+ auto_rate->supported_rates[ii++] =
+ cpu_to_le16(rsi_mcsrates[kk] | BIT(9));
+ auto_rate->supported_rates[ii] =
+ cpu_to_le16(rsi_mcsrates[kk--]);
+ }
+
+ for (; ii < RSI_TBL_SZ; ii++) {
+ auto_rate->supported_rates[ii] =
+ cpu_to_le16(rsi_mcsrates[0]);
+ }
+ }
+
+ auto_rate->num_supported_rates = cpu_to_le16(num_supported_rates * 2);
+ auto_rate->moderate_rate_inx = cpu_to_le16(num_supported_rates / 2);
+ auto_rate->desc_word[7] |= cpu_to_le16(0 << 8);
+ num_supported_rates *= 2;
+
+ auto_rate->desc_word[0] = cpu_to_le16((sizeof(*auto_rate) -
+ FRAME_DESC_SZ) |
+ (RSI_WIFI_MGMT_Q << 12));
+
+ skb_put(skb,
+ sizeof(struct rsi_auto_rate));
+ kfree(selected_rates);
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * This function informs about bss status with the help of sta notify
+ * params by sending an internal management frame to firmware.
+ *
+ * @param common Pointer to the driver private structure.
+ * @param status Bss status type.
+ * @param bssid Bssid.
+ * @param qos_enable Qos is enabled.
+ * @param aid Aid (unique for all STAs).
+ * @return None.
+ */
+void rsi_inform_bss_status(struct rsi_common *common,
+ u8 status,
+ const unsigned char *bssid,
+ u8 qos_enable,
+ u16 aid)
+{
+ if (status) {
+ rsi_hal_send_sta_notify_frame(common,
+ NL80211_IFTYPE_STATION,
+ STA_CONNECTED,
+ bssid,
+ qos_enable,
+ aid);
+ if (common->min_rate == 0xffff)
+ rsi_send_auto_rate_request(common);
+ } else {
+ rsi_hal_send_sta_notify_frame(common,
+ NL80211_IFTYPE_STATION,
+ STA_DISCONNECTED,
+ bssid,
+ qos_enable,
+ aid);
+ }
+ return;
+}
+
+/**
+ * This function sends a frame to read the
+ * mac address from the eeprom.
+ *
+ * @param common Pointer to the driver private structure.
+ * @return 0 on success, -1 on failure.
+ */
+static int rsi_eeprom_read(struct rsi_common *common)
+{
+ struct rsi_mac_frame *mgmt_frame;
+ struct sk_buff *skb;
+
+ rsi_dbg(MGMT_TX_ZONE, "%s: Sending EEPROM read req frame\n", __func__);
+
+ skb = dev_alloc_skb(FRAME_DESC_SZ);
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -1;
+ }
+
+ memset(skb->data, 0, FRAME_DESC_SZ);
+ mgmt_frame = (struct rsi_mac_frame *)skb->data;
+
+ /* FrameType */
+ mgmt_frame->desc_word[1] = cpu_to_le16(EEPROM_READ_TYPE);
+ mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
+ /* Number of bytes to read */
+ mgmt_frame->desc_word[3] = cpu_to_le16(ETH_ALEN +
+ WLAN_MAC_MAGIC_WORD_LEN +
+ WLAN_HOST_MODE_LEN +
+ WLAN_FW_VERSION_LEN);
+ /* Address to read */
+ mgmt_frame->desc_word[4] = cpu_to_le16(WLAN_MAC_EEPROM_ADDR);
+
+ skb_put(skb, FRAME_DESC_SZ);
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * This function handles the confirm frames.
+ *
+ * @param common Pointer to the driver private structure.
+ * @param msg Pointer to received packet.
+ * @return 0 on success, -1 on failure.
+ */
+static int rsi_handle_ta_confirm_type(struct rsi_common *common,
+ u8 *msg)
+{
+ u8 sub_type = (msg[15] & 0xff);
+
+ switch (sub_type) {
+ case BOOTUP_PARAMS_REQUEST:
+ rsi_dbg(FSM_ZONE, "%s: Boot up params confirm received\n",
+ __func__);
+ if (common->fsm_state == FSM_BOOT_PARAMS_SENT) {
+ if (rsi_eeprom_read(common)) {
+ common->fsm_state = FSM_CARD_NOT_READY;
+ goto out;
+ } else {
+ common->fsm_state = FSM_EEPROM_READ_MAC_ADDR;
+ }
+ } else {
+ rsi_dbg(ERR_ZONE,
+ "%s: Received bootup params cfm in %d state\n",
+ __func__, common->fsm_state);
+ return 0;
+ }
+ break;
+
+ case EEPROM_READ_TYPE:
+ if (common->fsm_state == FSM_EEPROM_READ_MAC_ADDR) {
+ if (msg[16] == MAGIC_WORD) {
+ u8 offset = (FRAME_DESC_SZ + WLAN_HOST_MODE_LEN
+ + WLAN_MAC_MAGIC_WORD_LEN);
+ memcpy(common->mac_addr,
+ &msg[offset],
+ ETH_ALEN);
+ memcpy(&common->fw_ver,
+ &msg[offset + ETH_ALEN],
+ sizeof(struct version_info));
+
+ } else {
+ common->fsm_state = FSM_CARD_NOT_READY;
+ break;
+ }
+ if (rsi_send_reset_mac(common))
+ goto out;
+ else
+ common->fsm_state = FSM_RESET_MAC_SENT;
+ } else {
+ rsi_dbg(ERR_ZONE,
+ "%s: Received eeprom mac addr in %d state\n",
+ __func__, common->fsm_state);
+ return 0;
+ }
+ break;
+
+ case RESET_MAC_REQ:
+ if (common->fsm_state == FSM_RESET_MAC_SENT) {
+ rsi_dbg(FSM_ZONE, "%s: Reset MAC cfm received\n",
+ __func__);
+
+ if (rsi_load_radio_caps(common))
+ goto out;
+ else
+ common->fsm_state = FSM_RADIO_CAPS_SENT;
+ } else {
+ rsi_dbg(ERR_ZONE,
+ "%s: Received reset mac cfm in %d state\n",
+ __func__, common->fsm_state);
+ return 0;
+ }
+ break;
+
+ case RADIO_CAPABILITIES:
+ if (common->fsm_state == FSM_RADIO_CAPS_SENT) {
+ common->rf_reset = 1;
+ if (rsi_program_bb_rf(common)) {
+ goto out;
+ } else {
+ common->fsm_state = FSM_BB_RF_PROG_SENT;
+ rsi_dbg(FSM_ZONE, "%s: Radio cap cfm received\n",
+ __func__);
+ }
+ } else {
+ rsi_dbg(ERR_ZONE,
+ "%s: Received radio caps cfm in %d state\n",
+ __func__, common->fsm_state);
+ return 0;
+ }
+ break;
+
+ case BB_PROG_VALUES_REQUEST:
+ case RF_PROG_VALUES_REQUEST:
+ case BBP_PROG_IN_TA:
+ rsi_dbg(FSM_ZONE, "%s: BB/RF cfm received\n", __func__);
+ if (common->fsm_state == FSM_BB_RF_PROG_SENT) {
+ common->bb_rf_prog_count--;
+ if (!common->bb_rf_prog_count) {
+ common->fsm_state = FSM_MAC_INIT_DONE;
+ return rsi_mac80211_attach(common);
+ }
+ } else {
+ goto out;
+ }
+ break;
+
+ default:
+ rsi_dbg(INFO_ZONE, "%s: Invalid TA confirm pkt received\n",
+ __func__);
+ break;
+ }
+ return 0;
+out:
+ rsi_dbg(ERR_ZONE, "%s: Unable to send pkt/Invalid frame received\n",
+ __func__);
+ return -1;
+}
+
+/**
+ * This function processes the management packets recieved
+ * from the hardware.
+ *
+ * @param common Pointer to the driver private structure.
+ * @param msg Pointer to the received packet.
+ * @return 0 on success, -1 on failure.
+ */
+int rsi_mgmt_pkt_recv(struct rsi_common *common, u8 *msg)
+{
+ s32 msg_len = (le16_to_cpu(*(__le16 *)&msg[0]) & 0x0fff);
+ u16 msg_type = (msg[2]);
+
+ rsi_dbg(FSM_ZONE, "%s: Msg Len: %d, Msg Type: %4x\n",
+ __func__, msg_len, msg_type);
+
+ if (msg_type == TA_CONFIRM_TYPE) {
+ return rsi_handle_ta_confirm_type(common, msg);
+ } else if (msg_type == CARD_READY_IND) {
+ rsi_dbg(FSM_ZONE, "%s: Card ready indication received\n",
+ __func__);
+ if (common->fsm_state == FSM_CARD_NOT_READY) {
+ rsi_set_default_parameters(common);
+
+ if (rsi_load_bootup_params(common))
+ return -1;
+ else
+ common->fsm_state = FSM_BOOT_PARAMS_SENT;
+ } else {
+ return -1;
+ }
+ } else if (msg_type == TX_STATUS_IND) {
+ if (msg[15] == PROBEREQ_CONFIRM)
+ common->mgmt_q_block = false;
+ rsi_dbg(FSM_ZONE, "%s: Probe confirm received\n",
+ __func__);
+ } else {
+ return rsi_mgmt_pkt_to_core(common, msg, msg_len, msg_type);
+ }
+ return 0;
+}
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
