Signed-off-by: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/htc_drv_beacon.c | 84 +------------------------
1 file changed, 2 insertions(+), 82 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index 9ff9e6e..fc16c10 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -62,97 +62,17 @@ void ath9k_htc_beaconq_config(struct ath9k_htc_priv *priv)
}
}
-
static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
struct ath_beacon_config *bss_conf)
{
- struct ath_common *common = ath9k_hw_common(priv->ah);
struct ath9k_beacon_state bs;
enum ath9k_int imask = 0;
- int dtimperiod, dtimcount;
- int bmiss_timeout;
- u32 nexttbtt = 0, intval, tsftu;
__be32 htc_imask = 0;
- u64 tsf;
- int num_beacons, offset, dtim_dec_count;
int ret __attribute__ ((unused));
u8 cmd_rsp;
- memset(&bs, 0, sizeof(bs));
-
- intval = bss_conf->beacon_interval;
- bmiss_timeout = (ATH_DEFAULT_BMISS_LIMIT * bss_conf->beacon_interval);
-
- /*
- * Setup dtim parameters according to
- * last beacon we received (which may be none).
- */
- dtimperiod = bss_conf->dtim_period;
- if (dtimperiod <= 0) /* NB: 0 if not known */
- dtimperiod = 1;
- dtimcount = 1;
- if (dtimcount >= dtimperiod) /* NB: sanity check */
- dtimcount = 0;
-
- /*
- * Pull nexttbtt forward to reflect the current
- * TSF and calculate dtim state for the result.
- */
- tsf = ath9k_hw_gettsf64(priv->ah);
- tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
-
- num_beacons = tsftu / intval + 1;
- offset = tsftu % intval;
- nexttbtt = tsftu - offset;
- if (offset)
- nexttbtt += intval;
-
- /* DTIM Beacon every dtimperiod Beacon */
- dtim_dec_count = num_beacons % dtimperiod;
- dtimcount -= dtim_dec_count;
- if (dtimcount < 0)
- dtimcount += dtimperiod;
-
- bs.bs_intval = TU_TO_USEC(intval);
- bs.bs_nexttbtt = TU_TO_USEC(nexttbtt);
- bs.bs_dtimperiod = dtimperiod * bs.bs_intval;
- bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount * bs.bs_intval;
-
- /*
- * Calculate the number of consecutive beacons to miss* before taking
- * a BMISS interrupt. The configuration is specified in TU so we only
- * need calculate based on the beacon interval. Note that we clamp the
- * result to at most 15 beacons.
- */
- bs.bs_bmissthreshold = DIV_ROUND_UP(bmiss_timeout, intval);
- if (bs.bs_bmissthreshold > 15)
- bs.bs_bmissthreshold = 15;
- else if (bs.bs_bmissthreshold <= 0)
- bs.bs_bmissthreshold = 1;
-
- /*
- * Calculate sleep duration. The configuration is given in ms.
- * We ensure a multiple of the beacon period is used. Also, if the sleep
- * duration is greater than the DTIM period then it makes senses
- * to make it a multiple of that.
- *
- * XXX fixed at 100ms
- */
-
- bs.bs_sleepduration = TU_TO_USEC(roundup(IEEE80211_MS_TO_TU(100),
- intval));
- if (bs.bs_sleepduration > bs.bs_dtimperiod)
- bs.bs_sleepduration = bs.bs_dtimperiod;
-
- /* TSF out of range threshold fixed at 1 second */
- bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
-
- ath_dbg(common, CONFIG, "intval: %u tsf: %llu tsftu: %u\n",
- intval, tsf, tsftu);
- ath_dbg(common, CONFIG, "bmiss: %u sleep: %u\n",
- bs.bs_bmissthreshold, bs.bs_sleepduration);
-
- /* Set the computed STA beacon timers */
+ if (ath9k_cmn_beacon_config_sta(priv->ah, bss_conf, &bs) == -EPERM)
+ return;
WMI_CMD(WMI_DISABLE_INTR_CMDID);
ath9k_hw_set_sta_beacon_timers(priv->ah, &bs);
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
