Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
---
drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.c | 106 +++++
drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h | 305 +++++++++++++
drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.c | 140 ++++++
drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.h | 95 ++++
drivers/net/wireless/rtlwifi/rtl8723be/rf.c | 504 +++++++++++++++++++++
drivers/net/wireless/rtlwifi/rtl8723be/rf.h | 43 ++
6 files changed, 1193 insertions(+)
create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.c
create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h
create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.c
create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.h
create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/rf.c
create mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/rf.h
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.c b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.c
new file mode 100644
index 0000000..b5167e7
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.c
@@ -0,0 +1,106 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+
+#include "pwrseqcmd.h"
+#include "pwrseq.h"
+
+
+/* drivers should parse below arrays and do the corresponding actions */
+/*3 Power on Array*/
+struct wlan_pwr_cfg rtl8723B_power_on_flow[RTL8723B_TRANS_CARDEMU_TO_ACT_STEPS +
+ RTL8723B_TRANS_END_STEPS] = {
+ RTL8723B_TRANS_CARDEMU_TO_ACT
+ RTL8723B_TRANS_END
+};
+
+/*3Radio off GPIO Array */
+struct wlan_pwr_cfg rtl8723B_radio_off_flow[RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS
+ + RTL8723B_TRANS_END_STEPS] = {
+ RTL8723B_TRANS_ACT_TO_CARDEMU
+ RTL8723B_TRANS_END
+};
+
+/*3Card Disable Array*/
+struct wlan_pwr_cfg rtl8723B_card_disable_flow
+ [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8723B_TRANS_END_STEPS] = {
+ RTL8723B_TRANS_ACT_TO_CARDEMU
+ RTL8723B_TRANS_CARDEMU_TO_CARDDIS
+ RTL8723B_TRANS_END
+};
+
+/*3 Card Enable Array*/
+struct wlan_pwr_cfg rtl8723B_card_enable_flow
+ [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8723B_TRANS_END_STEPS] = {
+ RTL8723B_TRANS_CARDDIS_TO_CARDEMU
+ RTL8723B_TRANS_CARDEMU_TO_ACT
+ RTL8723B_TRANS_END
+};
+
+/*3Suspend Array*/
+struct wlan_pwr_cfg rtl8723B_suspend_flow[RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8723B_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8723B_TRANS_END_STEPS] = {
+ RTL8723B_TRANS_ACT_TO_CARDEMU
+ RTL8723B_TRANS_CARDEMU_TO_SUS
+ RTL8723B_TRANS_END
+};
+
+/*3 Resume Array*/
+struct wlan_pwr_cfg rtl8723B_resume_flow[RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8723B_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8723B_TRANS_END_STEPS] = {
+ RTL8723B_TRANS_SUS_TO_CARDEMU
+ RTL8723B_TRANS_CARDEMU_TO_ACT
+ RTL8723B_TRANS_END
+};
+
+/*3HWPDN Array*/
+struct wlan_pwr_cfg rtl8723B_hwpdn_flow[RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8723B_TRANS_END_STEPS] = {
+ RTL8723B_TRANS_ACT_TO_CARDEMU
+ RTL8723B_TRANS_CARDEMU_TO_PDN
+ RTL8723B_TRANS_END
+};
+
+/*3 Enter LPS */
+struct wlan_pwr_cfg rtl8723B_enter_lps_flow[RTL8723B_TRANS_ACT_TO_LPS_STEPS +
+ RTL8723B_TRANS_END_STEPS] = {
+ /*FW behavior*/
+ RTL8723B_TRANS_ACT_TO_LPS
+ RTL8723B_TRANS_END
+};
+
+/*3 Leave LPS */
+struct wlan_pwr_cfg rtl8723B_leave_lps_flow[RTL8723B_TRANS_LPS_TO_ACT_STEPS +
+ RTL8723B_TRANS_END_STEPS] = {
+ /*FW behavior*/
+ RTL8723B_TRANS_LPS_TO_ACT
+ RTL8723B_TRANS_END
+};
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h
new file mode 100644
index 0000000..960b408
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h
@@ -0,0 +1,305 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723BE_PWRSEQ_H__
+#define __RTL8723BE_PWRSEQ_H__
+
+#include "pwrseqcmd.h"
+/* Check document WM-20130425-JackieLau-RTL8723B_Power_Architecture v05.vsd
+ * There are 6 HW Power States:
+ * 0: POFF--Power Off
+ * 1: PDN--Power Down
+ * 2: CARDEMU--Card Emulation
+ * 3: ACT--Active Mode
+ * 4: LPS--Low Power State
+ * 5: SUS--Suspend
+ *
+ * The transition from different states are defined below
+ * TRANS_CARDEMU_TO_ACT
+ * TRANS_ACT_TO_CARDEMU
+ * TRANS_CARDEMU_TO_SUS
+ * TRANS_SUS_TO_CARDEMU
+ * TRANS_CARDEMU_TO_PDN
+ * TRANS_ACT_TO_LPS
+ * TRANS_LPS_TO_ACT
+ *
+ * TRANS_END
+ */
+#define RTL8723B_TRANS_CARDEMU_TO_ACT_STEPS 23
+#define RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS 15
+#define RTL8723B_TRANS_CARDEMU_TO_SUS_STEPS 15
+#define RTL8723B_TRANS_SUS_TO_CARDEMU_STEPS 15
+#define RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS 15
+#define RTL8723B_TRANS_PDN_TO_CARDEMU_STEPS 15
+#define RTL8723B_TRANS_ACT_TO_LPS_STEPS 15
+#define RTL8723B_TRANS_LPS_TO_ACT_STEPS 15
+#define RTL8723B_TRANS_END_STEPS 1
+
+#define RTL8723B_TRANS_CARDEMU_TO_ACT \
+ {0x0020, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ {0x0067, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \
+ {0x0001, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 1, PWRSEQ_DELAY_MS}, \
+ {0x0000, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), 0}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, (BIT(4)|BIT(3)|BIT(2)), 0}, \
+ {0x0075, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0) , 0}, \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)}, \
+ {0x0075, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0) , BIT(0)}, \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, (BIT(4)|BIT(3)), 0}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0}, \
+ {0x0010, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6), BIT(6)}, \
+ {0x0049, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ {0x0063, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ {0x0062, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0}, \
+ {0x0058, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ {0x005A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ {0x0068, PWR_CUT_TESTCHIP_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3), BIT(3)}, \
+ {0x0069, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6), BIT(6)},
+
+#define RTL8723B_TRANS_ACT_TO_CARDEMU \
+ {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, \
+ {0x004F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \
+ {0x0049, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0}, \
+ {0x0010, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6), 0}, \
+ {0x0000, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT(5), BIT(5)}, \
+ {0x0020, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT(0), 0},
+
+#define RTL8723B_TRANS_CARDEMU_TO_SUS \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4) | BIT(3), (BIT(4) | BIT(3))}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3)}, \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x20}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3) | BIT(4)},\
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0},
+
+#define RTL8723B_TRANS_SUS_TO_CARDEMU \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(7), 0}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)}, \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0},
+
+#define RTL8723B_TRANS_CARDEMU_TO_CARDDIS \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x20}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(2), BIT(2)}, \
+ {0x004A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 1}, \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0},
+
+#define RTL8723B_TRANS_CARDDIS_TO_CARDEMU \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(7), 0}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)}, \
+ {0x004A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0}, \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \
+ {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},
+
+#define RTL8723B_TRANS_CARDEMU_TO_PDN \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_SDIO_MSK | PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, 0xFF, 0x20}, \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)},
+
+#define RTL8723B_TRANS_PDN_TO_CARDEMU \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},
+
+#define RTL8723B_TRANS_ACT_TO_LPS \
+ {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \
+ {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0}, \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x03}, \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0}, \
+ {0x0093, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x00}, \
+ {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5)},
+
+#define RTL8723B_TRANS_LPS_TO_ACT \
+ {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, \
+ {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, \
+ {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, \
+ {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \
+ {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(7), 0}, \
+ {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6)|BIT(7), 0}, \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1) | BIT(0), BIT(1) | BIT(0)}, \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},
+
+#define RTL8723B_TRANS_END \
+ {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, 0, \
+ PWR_CMD_END, 0, 0},
+
+extern struct wlan_pwr_cfg rtl8723B_power_on_flow
+ [RTL8723B_TRANS_CARDEMU_TO_ACT_STEPS +
+ RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_radio_off_flow
+ [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_card_disable_flow
+ [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_card_enable_flow
+ [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_suspend_flow
+ [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8723B_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_resume_flow
+ [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8723B_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_hwpdn_flow
+ [RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8723B_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_enter_lps_flow
+ [RTL8723B_TRANS_ACT_TO_LPS_STEPS +
+ RTL8723B_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8723B_leave_lps_flow
+ [RTL8723B_TRANS_LPS_TO_ACT_STEPS +
+ RTL8723B_TRANS_END_STEPS];
+
+/* RTL8723 Power Configuration CMDs for PCIe interface */
+#define RTL8723_NIC_PWR_ON_FLOW rtl8723B_power_on_flow
+#define RTL8723_NIC_RF_OFF_FLOW rtl8723B_radio_off_flow
+#define RTL8723_NIC_DISABLE_FLOW rtl8723B_card_disable_flow
+#define RTL8723_NIC_ENABLE_FLOW rtl8723B_card_enable_flow
+#define RTL8723_NIC_SUSPEND_FLOW rtl8723B_suspend_flow
+#define RTL8723_NIC_RESUME_FLOW rtl8723B_resume_flow
+#define RTL8723_NIC_PDN_FLOW rtl8723B_hwpdn_flow
+#define RTL8723_NIC_LPS_ENTER_FLOW rtl8723B_enter_lps_flow
+#define RTL8723_NIC_LPS_LEAVE_FLOW rtl8723B_leave_lps_flow
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.c b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.c
new file mode 100644
index 0000000..50f8d60
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.c
@@ -0,0 +1,140 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+
+#include "pwrseq.h"
+
+/* Description:
+ * This routine deal with the Power Configuration CMDs
+ * parsing for RTL8723/RTL8188E Series IC.
+ * Assumption:
+ * We should follow specific format which was released from HW SD.
+ *
+ * 2011.07.07, added by Roger.
+ */
+bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
+ u8 fab_version, u8 interface_type,
+ struct wlan_pwr_cfg pwrcfgcmd[])
+
+{
+ struct wlan_pwr_cfg pwr_cfg_cmd = {0};
+ bool b_polling_bit = false;
+ u32 ary_idx = 0;
+ u8 value = 0;
+ u32 offset = 0;
+ u32 polling_count = 0;
+ u32 max_polling_cnt = 5000;
+
+ do {
+ pwr_cfg_cmd = pwrcfgcmd[ary_idx];
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "rtl_hal_pwrseqcmdparsing(): "
+ "offset(%#x),cut_msk(%#x), fab_msk(%#x),"
+ "interface_msk(%#x), base(%#x), "
+ "cmd(%#x), msk(%#x), value(%#x)\n",
+ GET_PWR_CFG_OFFSET(pwr_cfg_cmd),
+ GET_PWR_CFG_CUT_MASK(pwr_cfg_cmd),
+ GET_PWR_CFG_FAB_MASK(pwr_cfg_cmd),
+ GET_PWR_CFG_INTF_MASK(pwr_cfg_cmd),
+ GET_PWR_CFG_BASE(pwr_cfg_cmd),
+ GET_PWR_CFG_CMD(pwr_cfg_cmd),
+ GET_PWR_CFG_MASK(pwr_cfg_cmd),
+ GET_PWR_CFG_VALUE(pwr_cfg_cmd));
+
+ if ((GET_PWR_CFG_FAB_MASK(pwr_cfg_cmd)&fab_version) &&
+ (GET_PWR_CFG_CUT_MASK(pwr_cfg_cmd)&cut_version) &&
+ (GET_PWR_CFG_INTF_MASK(pwr_cfg_cmd)&interface_type)) {
+ switch (GET_PWR_CFG_CMD(pwr_cfg_cmd)) {
+ case PWR_CMD_READ:
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "rtl_hal_pwrseqcmdparsing(): "
+ "PWR_CMD_READ\n");
+ break;
+ case PWR_CMD_WRITE:
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "rtl_hal_pwrseqcmdparsing(): "
+ "PWR_CMD_WRITE\n");
+ offset = GET_PWR_CFG_OFFSET(pwr_cfg_cmd);
+
+ /*Read the value from system register*/
+ value = rtl_read_byte(rtlpriv, offset);
+ value &= (~(GET_PWR_CFG_MASK(pwr_cfg_cmd)));
+ value = value | (GET_PWR_CFG_VALUE(pwr_cfg_cmd)
+ & GET_PWR_CFG_MASK(pwr_cfg_cmd));
+
+ /*Write the value back to sytem register*/
+ rtl_write_byte(rtlpriv, offset, value);
+ break;
+ case PWR_CMD_POLLING:
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "rtl_hal_pwrseqcmdparsing(): "
+ "PWR_CMD_POLLING\n");
+ b_polling_bit = false;
+ offset = GET_PWR_CFG_OFFSET(pwr_cfg_cmd);
+
+ do {
+ value = rtl_read_byte(rtlpriv, offset);
+
+ value &= GET_PWR_CFG_MASK(pwr_cfg_cmd);
+ if (value ==
+ (GET_PWR_CFG_VALUE(pwr_cfg_cmd) &
+ GET_PWR_CFG_MASK(pwr_cfg_cmd)))
+ b_polling_bit = true;
+ else
+ udelay(10);
+
+ if (polling_count++ > max_polling_cnt)
+ return false;
+
+ } while (!b_polling_bit);
+ break;
+ case PWR_CMD_DELAY:
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "rtl_hal_pwrseqcmdparsing(): "
+ "PWR_CMD_DELAY\n");
+ if (GET_PWR_CFG_VALUE(pwr_cfg_cmd) ==
+ PWRSEQ_DELAY_US)
+ udelay(GET_PWR_CFG_OFFSET(pwr_cfg_cmd));
+ else
+ mdelay(GET_PWR_CFG_OFFSET(pwr_cfg_cmd));
+ break;
+ case PWR_CMD_END:
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "rtl_hal_pwrseqcmdparsing(): "
+ "PWR_CMD_END\n");
+ return true;
+ break;
+ default:
+ RT_ASSERT(false,
+ "rtl_hal_pwrseqcmdparsing(): "
+ "Unknown CMD!!\n");
+ break;
+ }
+ }
+
+ ary_idx++;
+ } while (1);
+
+ return true;
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.h b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.h
new file mode 100644
index 0000000..edc4a81
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.h
@@ -0,0 +1,95 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723BE_PWRSEQCMD_H__
+#define __RTL8723BE_PWRSEQCMD_H__
+
+#include "../wifi.h"
+/*---------------------------------------------*/
+/*The value of cmd: 4 bits */
+/*---------------------------------------------*/
+#define PWR_CMD_READ 0x00
+#define PWR_CMD_WRITE 0x01
+#define PWR_CMD_POLLING 0x02
+#define PWR_CMD_DELAY 0x03
+#define PWR_CMD_END 0x04
+
+/* define the base address of each block */
+#define PWR_BASEADDR_MAC 0x00
+#define PWR_BASEADDR_USB 0x01
+#define PWR_BASEADDR_PCIE 0x02
+#define PWR_BASEADDR_SDIO 0x03
+
+#define PWR_INTF_SDIO_MSK BIT(0)
+#define PWR_INTF_USB_MSK BIT(1)
+#define PWR_INTF_PCI_MSK BIT(2)
+#define PWR_INTF_ALL_MSK (BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+#define PWR_FAB_TSMC_MSK BIT(0)
+#define PWR_FAB_UMC_MSK BIT(1)
+#define PWR_FAB_ALL_MSK (BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+#define PWR_CUT_TESTCHIP_MSK BIT(0)
+#define PWR_CUT_A_MSK BIT(1)
+#define PWR_CUT_B_MSK BIT(2)
+#define PWR_CUT_C_MSK BIT(3)
+#define PWR_CUT_D_MSK BIT(4)
+#define PWR_CUT_E_MSK BIT(5)
+#define PWR_CUT_F_MSK BIT(6)
+#define PWR_CUT_G_MSK BIT(7)
+#define PWR_CUT_ALL_MSK 0xFF
+
+
+enum pwrseq_delay_unit {
+ PWRSEQ_DELAY_US,
+ PWRSEQ_DELAY_MS,
+};
+
+struct wlan_pwr_cfg {
+ u16 offset;
+ u8 cut_msk;
+ u8 fab_msk:4;
+ u8 interface_msk:4;
+ u8 base:4;
+ u8 cmd:4;
+ u8 msk;
+ u8 value;
+
+};
+
+#define GET_PWR_CFG_OFFSET(__PWR_CMD) __PWR_CMD.offset
+#define GET_PWR_CFG_CUT_MASK(__PWR_CMD) __PWR_CMD.cut_msk
+#define GET_PWR_CFG_FAB_MASK(__PWR_CMD) __PWR_CMD.fab_msk
+#define GET_PWR_CFG_INTF_MASK(__PWR_CMD) __PWR_CMD.interface_msk
+#define GET_PWR_CFG_BASE(__PWR_CMD) __PWR_CMD.base
+#define GET_PWR_CFG_CMD(__PWR_CMD) __PWR_CMD.cmd
+#define GET_PWR_CFG_MASK(__PWR_CMD) __PWR_CMD.msk
+#define GET_PWR_CFG_VALUE(__PWR_CMD) __PWR_CMD.value
+
+bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
+ u8 fab_version, u8 interface_type,
+ struct wlan_pwr_cfg pwrcfgcmd[]);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/rf.c b/drivers/net/wireless/rtlwifi/rtl8723be/rf.c
new file mode 100644
index 0000000..4862949
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/rf.c
@@ -0,0 +1,504 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "rf.h"
+#include "dm.h"
+
+static bool _rtl8723be_phy_rf6052_config_parafile(struct ieee80211_hw *hw);
+
+void rtl8723be_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ switch (bandwidth) {
+ case HT_CHANNEL_WIDTH_20:
+ rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
+ 0xfffff3ff) | BIT(10) | BIT(11));
+ rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
+ rtlphy->rfreg_chnlval[0]);
+ break;
+ case HT_CHANNEL_WIDTH_20_40:
+ rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
+ 0xfffff3ff) | BIT(10));
+ rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
+ rtlphy->rfreg_chnlval[0]);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+ "unknown bandwidth: %#X\n", bandwidth);
+ break;
+ }
+}
+
+void rtl8723be_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
+ u8 *ppowerlevel)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u32 tx_agc[2] = {0, 0}, tmpval;
+ bool turbo_scanoff = false;
+ u8 idx1, idx2;
+ u8 *ptr;
+ u8 direction;
+ u32 pwrtrac_value;
+
+ if (rtlefuse->eeprom_regulatory != 0)
+ turbo_scanoff = true;
+
+ if (mac->act_scanning) {
+ tx_agc[RF90_PATH_A] = 0x3f3f3f3f;
+ tx_agc[RF90_PATH_B] = 0x3f3f3f3f;
+
+ if (turbo_scanoff) {
+ for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+ tx_agc[idx1] = ppowerlevel[idx1] |
+ (ppowerlevel[idx1] << 8) |
+ (ppowerlevel[idx1] << 16) |
+ (ppowerlevel[idx1] << 24);
+ }
+ }
+ } else {
+ for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+ tx_agc[idx1] = ppowerlevel[idx1] |
+ (ppowerlevel[idx1] << 8) |
+ (ppowerlevel[idx1] << 16) |
+ (ppowerlevel[idx1] << 24);
+ }
+ if (rtlefuse->eeprom_regulatory == 0) {
+ tmpval =
+ (rtlphy->mcs_offset[0][6]) +
+ (rtlphy->mcs_offset[0][7] << 8);
+ tx_agc[RF90_PATH_A] += tmpval;
+
+ tmpval = (rtlphy->mcs_offset[0][14]) +
+ (rtlphy->mcs_offset[0][15] <<
+ 24);
+ tx_agc[RF90_PATH_B] += tmpval;
+ }
+ }
+ for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+ ptr = (u8 *)(&(tx_agc[idx1]));
+ for (idx2 = 0; idx2 < 4; idx2++) {
+ if (*ptr > RF6052_MAX_TX_PWR)
+ *ptr = RF6052_MAX_TX_PWR;
+ ptr++;
+ }
+ }
+ rtl8723be_dm_txpower_track_adjust(hw, 1, &direction, &pwrtrac_value);
+ if (direction == 1) {
+ tx_agc[0] += pwrtrac_value;
+ tx_agc[1] += pwrtrac_value;
+ } else if (direction == 2) {
+ tx_agc[0] -= pwrtrac_value;
+ tx_agc[1] -= pwrtrac_value;
+ }
+ tmpval = tx_agc[RF90_PATH_A] & 0xff;
+ rtl_set_bbreg(hw, RTXAGC_A_CCK1_MCS32, MASKBYTE1, tmpval);
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "CCK PWR 1M (rf-A) = 0x%x (reg 0x%x)\n", tmpval,
+ RTXAGC_A_CCK1_MCS32);
+
+ tmpval = tx_agc[RF90_PATH_A] >> 8;
+
+ rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "CCK PWR 2~11M (rf-A) = 0x%x (reg 0x%x)\n", tmpval,
+ RTXAGC_B_CCK11_A_CCK2_11);
+
+ tmpval = tx_agc[RF90_PATH_B] >> 24;
+ rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, MASKBYTE0, tmpval);
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "CCK PWR 11M (rf-B) = 0x%x (reg 0x%x)\n", tmpval,
+ RTXAGC_B_CCK11_A_CCK2_11);
+
+ tmpval = tx_agc[RF90_PATH_B] & 0x00ffffff;
+ rtl_set_bbreg(hw, RTXAGC_B_CCK1_55_MCS32, 0xffffff00, tmpval);
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "CCK PWR 1~5.5M (rf-B) = 0x%x (reg 0x%x)\n", tmpval,
+ RTXAGC_B_CCK1_55_MCS32);
+}
+
+static void rtl8723be_phy_get_power_base(struct ieee80211_hw *hw,
+ u8 *ppowerlevel_ofdm,
+ u8 *ppowerlevel_bw20,
+ u8 *ppowerlevel_bw40,
+ u8 channel, u32 *ofdmbase,
+ u32 *mcsbase)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u32 powerbase0, powerbase1;
+ u8 i, powerlevel[2];
+
+ for (i = 0; i < 2; i++) {
+ powerbase0 = ppowerlevel_ofdm[i];
+
+ powerbase0 = (powerbase0 << 24) | (powerbase0 << 16) |
+ (powerbase0 << 8) | powerbase0;
+ *(ofdmbase + i) = powerbase0;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ " [OFDM power base index rf(%c) = 0x%x]\n",
+ ((i == 0) ? 'A' : 'B'), *(ofdmbase + i));
+ }
+
+ for (i = 0; i < 2; i++) {
+ if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20)
+ powerlevel[i] = ppowerlevel_bw20[i];
+ else
+ powerlevel[i] = ppowerlevel_bw40[i];
+ powerbase1 = powerlevel[i];
+ powerbase1 = (powerbase1 << 24) | (powerbase1 << 16) |
+ (powerbase1 << 8) | powerbase1;
+
+ *(mcsbase + i) = powerbase1;
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ " [MCS power base index rf(%c) = 0x%x]\n",
+ ((i == 0) ? 'A' : 'B'), *(mcsbase + i));
+ }
+}
+
+static void txpwr_by_regulatory(struct ieee80211_hw *hw, u8 channel, u8 index,
+ u32 *powerbase0, u32 *powerbase1,
+ u32 *p_outwriteval)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u8 i, chnlgroup = 0, pwr_diff_limit[4];
+ u8 pwr_diff = 0, customer_pwr_diff;
+ u32 writeval, customer_limit, rf;
+
+ for (rf = 0; rf < 2; rf++) {
+ switch (rtlefuse->eeprom_regulatory) {
+ case 0:
+ chnlgroup = 0;
+
+ writeval =
+ rtlphy->mcs_offset[chnlgroup][index + (rf ? 8 : 0)]
+ + ((index < 2) ? powerbase0[rf] : powerbase1[rf]);
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "RTK better performance, "
+ "writeval(%c) = 0x%x\n",
+ ((rf == 0) ? 'A' : 'B'), writeval);
+ break;
+ case 1:
+ if (rtlphy->pwrgroup_cnt == 1) {
+ chnlgroup = 0;
+ } else {
+ if (channel < 3)
+ chnlgroup = 0;
+ else if (channel < 6)
+ chnlgroup = 1;
+ else if (channel < 9)
+ chnlgroup = 2;
+ else if (channel < 12)
+ chnlgroup = 3;
+ else if (channel < 14)
+ chnlgroup = 4;
+ else if (channel == 14)
+ chnlgroup = 5;
+ }
+ writeval = rtlphy->mcs_offset[chnlgroup]
+ [index + (rf ? 8 : 0)] + ((index < 2) ?
+ powerbase0[rf] :
+ powerbase1[rf]);
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "Realtek regulatory, 20MHz, "
+ "writeval(%c) = 0x%x\n",
+ ((rf == 0) ? 'A' : 'B'), writeval);
+
+ break;
+ case 2:
+ writeval =
+ ((index < 2) ? powerbase0[rf] : powerbase1[rf]);
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "Better regulatory, "
+ "writeval(%c) = 0x%x\n",
+ ((rf == 0) ? 'A' : 'B'), writeval);
+ break;
+ case 3:
+ chnlgroup = 0;
+
+ if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "customer's limit, 40MHz "
+ "rf(%c) = 0x%x\n",
+ ((rf == 0) ? 'A' : 'B'),
+ rtlefuse->pwrgroup_ht40[rf]
+ [channel-1]);
+ } else {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "customer's limit, 20MHz "
+ "rf(%c) = 0x%x\n",
+ ((rf == 0) ? 'A' : 'B'),
+ rtlefuse->pwrgroup_ht20[rf]
+ [channel-1]);
+ }
+
+ if (index < 2)
+ pwr_diff =
+ rtlefuse->txpwr_legacyhtdiff[rf][channel-1];
+ else if (rtlphy->current_chan_bw ==
+ HT_CHANNEL_WIDTH_20)
+ pwr_diff =
+ rtlefuse->txpwr_ht20diff[rf][channel-1];
+
+ if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40)
+ customer_pwr_diff =
+ rtlefuse->pwrgroup_ht40[rf][channel-1];
+ else
+ customer_pwr_diff =
+ rtlefuse->pwrgroup_ht20[rf][channel-1];
+
+ if (pwr_diff > customer_pwr_diff)
+ pwr_diff = 0;
+ else
+ pwr_diff = customer_pwr_diff - pwr_diff;
+
+ for (i = 0; i < 4; i++) {
+ pwr_diff_limit[i] =
+ (u8)((rtlphy->mcs_offset
+ [chnlgroup][index + (rf ? 8 : 0)] &
+ (0x7f << (i * 8))) >> (i * 8));
+
+ if (pwr_diff_limit[i] > pwr_diff)
+ pwr_diff_limit[i] = pwr_diff;
+ }
+
+ customer_limit = (pwr_diff_limit[3] << 24) |
+ (pwr_diff_limit[2] << 16) |
+ (pwr_diff_limit[1] << 8) |
+ (pwr_diff_limit[0]);
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "Customer's limit rf(%c) = 0x%x\n",
+ ((rf == 0) ? 'A' : 'B'), customer_limit);
+
+ writeval = customer_limit + ((index < 2) ?
+ powerbase0[rf] :
+ powerbase1[rf]);
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "Customer, writeval rf(%c)= 0x%x\n",
+ ((rf == 0) ? 'A' : 'B'), writeval);
+ break;
+ default:
+ chnlgroup = 0;
+ writeval =
+ rtlphy->mcs_offset[chnlgroup]
+ [index + (rf ? 8 : 0)]
+ + ((index < 2) ? powerbase0[rf] : powerbase1[rf]);
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "RTK better performance, writeval "
+ "rf(%c) = 0x%x\n",
+ ((rf == 0) ? 'A' : 'B'), writeval);
+ break;
+ }
+
+ if (rtlpriv->dm.dynamic_txhighpower_lvl == TXHIGHPWRLEVEL_BT1)
+ writeval = writeval - 0x06060606;
+ else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+ TXHIGHPWRLEVEL_BT2)
+ writeval = writeval - 0x0c0c0c0c;
+ *(p_outwriteval + rf) = writeval;
+ }
+}
+
+static void _rtl8723be_write_ofdm_power_reg(struct ieee80211_hw *hw,
+ u8 index, u32 *value)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u16 regoffset_a[6] = {
+ RTXAGC_A_RATE18_06, RTXAGC_A_RATE54_24,
+ RTXAGC_A_MCS03_MCS00, RTXAGC_A_MCS07_MCS04,
+ RTXAGC_A_MCS11_MCS08, RTXAGC_A_MCS15_MCS12
+ };
+ u16 regoffset_b[6] = {
+ RTXAGC_B_RATE18_06, RTXAGC_B_RATE54_24,
+ RTXAGC_B_MCS03_MCS00, RTXAGC_B_MCS07_MCS04,
+ RTXAGC_B_MCS11_MCS08, RTXAGC_B_MCS15_MCS12
+ };
+ u8 i, rf, pwr_val[4];
+ u32 writeval;
+ u16 regoffset;
+
+ for (rf = 0; rf < 2; rf++) {
+ writeval = value[rf];
+ for (i = 0; i < 4; i++) {
+ pwr_val[i] = (u8) ((writeval & (0x7f <<
+ (i * 8))) >> (i * 8));
+
+ if (pwr_val[i] > RF6052_MAX_TX_PWR)
+ pwr_val[i] = RF6052_MAX_TX_PWR;
+ }
+ writeval = (pwr_val[3] << 24) | (pwr_val[2] << 16) |
+ (pwr_val[1] << 8) | pwr_val[0];
+
+ if (rf == 0)
+ regoffset = regoffset_a[index];
+ else
+ regoffset = regoffset_b[index];
+ rtl_set_bbreg(hw, regoffset, MASKDWORD, writeval);
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "Set 0x%x = %08x\n", regoffset, writeval);
+ }
+}
+
+void rtl8723be_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw,
+ u8 *ppowerlevel_ofdm,
+ u8 *ppowerlevel_bw20,
+ u8 *ppowerlevel_bw40, u8 channel)
+{
+ u32 writeval[2], powerbase0[2], powerbase1[2];
+ u8 index;
+ u8 direction;
+ u32 pwrtrac_value;
+
+ rtl8723be_phy_get_power_base(hw, ppowerlevel_ofdm, ppowerlevel_bw20,
+ ppowerlevel_bw40, channel,
+ &powerbase0[0], &powerbase1[0]);
+
+ rtl8723be_dm_txpower_track_adjust(hw, 1, &direction, &pwrtrac_value);
+
+ for (index = 0; index < 6; index++) {
+ txpwr_by_regulatory(hw, channel, index, &powerbase0[0],
+ &powerbase1[0], &writeval[0]);
+ if (direction == 1) {
+ writeval[0] += pwrtrac_value;
+ writeval[1] += pwrtrac_value;
+ } else if (direction == 2) {
+ writeval[0] -= pwrtrac_value;
+ writeval[1] -= pwrtrac_value;
+ }
+ _rtl8723be_write_ofdm_power_reg(hw, index, &writeval[0]);
+ }
+}
+
+bool rtl8723be_phy_rf6052_config(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ if (rtlphy->rf_type == RF_1T1R)
+ rtlphy->num_total_rfpath = 1;
+ else
+ rtlphy->num_total_rfpath = 2;
+
+ return _rtl8723be_phy_rf6052_config_parafile(hw);
+}
+
+static bool _rtl8723be_phy_rf6052_config_parafile(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct bb_reg_def *pphyreg;
+ u32 u4_regvalue = 0;
+ u8 rfpath;
+ bool rtstatus = true;
+
+ for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {
+ pphyreg = &rtlphy->phyreg_def[rfpath];
+
+ switch (rfpath) {
+ case RF90_PATH_A:
+ case RF90_PATH_C:
+ u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs,
+ BRFSI_RFENV);
+ break;
+ case RF90_PATH_B:
+ case RF90_PATH_D:
+ u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs,
+ BRFSI_RFENV << 16);
+ break;
+ }
+
+ rtl_set_bbreg(hw, pphyreg->rfintfe, BRFSI_RFENV << 16, 0x1);
+ udelay(1);
+
+ rtl_set_bbreg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1);
+ udelay(1);
+
+ rtl_set_bbreg(hw, pphyreg->rfhssi_para2,
+ B3WIREADDREAALENGTH, 0x0);
+ udelay(1);
+
+ rtl_set_bbreg(hw, pphyreg->rfhssi_para2, B3WIREDATALENGTH, 0x0);
+ udelay(1);
+
+ switch (rfpath) {
+ case RF90_PATH_A:
+ rtstatus = rtl8723be_phy_config_rf_with_headerfile(hw,
+ (enum radio_path)rfpath);
+ break;
+ case RF90_PATH_B:
+ rtstatus = rtl8723be_phy_config_rf_with_headerfile(hw,
+ (enum radio_path)rfpath);
+ break;
+ case RF90_PATH_C:
+ break;
+ case RF90_PATH_D:
+ break;
+ }
+
+ switch (rfpath) {
+ case RF90_PATH_A:
+ case RF90_PATH_C:
+ rtl_set_bbreg(hw, pphyreg->rfintfs,
+ BRFSI_RFENV, u4_regvalue);
+ break;
+ case RF90_PATH_B:
+ case RF90_PATH_D:
+ rtl_set_bbreg(hw, pphyreg->rfintfs,
+ BRFSI_RFENV << 16, u4_regvalue);
+ break;
+ }
+
+ if (!rtstatus) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "Radio[%d] Fail!!", rfpath);
+ return false;
+ }
+ }
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "\n");
+ return rtstatus;
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/rf.h b/drivers/net/wireless/rtlwifi/rtl8723be/rf.h
new file mode 100644
index 0000000..a6fea10
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/rf.h
@@ -0,0 +1,43 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2014 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@xxxxxxxxxxx>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723BE_RF_H__
+#define __RTL8723BE_RF_H__
+
+#define RF6052_MAX_TX_PWR 0x3F
+#define RF6052_MAX_REG 0x3F
+
+void rtl8723be_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw,
+ u8 bandwidth);
+void rtl8723be_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
+ u8 *ppowerlevel);
+void rtl8723be_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw,
+ u8 *ppowerlevel_ofdm,
+ u8 *ppowerlevel_bw20,
+ u8 *ppowerlevel_bw40,
+ u8 channel);
+bool rtl8723be_phy_rf6052_config(struct ieee80211_hw *hw);
+
+#endif
--
1.8.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
