5/10 MHz channel bandwidth is configured via the PLL clock, instead of the AR_PHY_MODE register. Using that register is AR93xx specific, and makes the mode incompatible with earlier chipsets. In some early versions, these flags were apparently applied at the wrong point in time and thus did not cause connectivity issues, however now they are causing problems, as pointed out in this OpenWrt ticket: https://dev.openwrt.org/ticket/14916 Signed-off-by: Felix Fietkau <nbd@xxxxxxxxxxx> --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 09facba..8927fc3 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -868,10 +868,6 @@ static void ar9003_hw_set_rfmode(struct ath_hw *ah, if (IS_CHAN_A_FAST_CLOCK(ah, chan)) rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE); - if (IS_CHAN_QUARTER_RATE(chan)) - rfMode |= AR_PHY_MODE_QUARTER; - if (IS_CHAN_HALF_RATE(chan)) - rfMode |= AR_PHY_MODE_HALF; if (rfMode & (AR_PHY_MODE_QUARTER | AR_PHY_MODE_HALF)) REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL, -- 1.8.3.4 (Apple Git-47) -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
