Introduce NL80211_RRF_AUTO_BW rule flag. If this flag set
maximum available bandwidth should be calculated base on
contiguous rules and wider channels will be allowed to cross
multiple contiguous/overlapping frequency ranges.
In case of old kernels maximum bandwidth from regulatory
rule will be used, while there is no NL80211_RRF_AUTO_BW flag.
This extend patch:
cfg80211: regulatory introduce maximum bandwidth calculation
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@xxxxxxxxx>
---
include/uapi/linux/nl80211.h | 9 ++---
net/wireless/genregdb.awk | 2 ++
net/wireless/nl80211.c | 7 ++--
net/wireless/reg.c | 76 ++++++++++++++++++++++++------------------
4 files changed, 54 insertions(+), 40 deletions(-)
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index ba1f762..bd2cb58 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2437,10 +2437,7 @@ enum nl80211_reg_type {
* in KHz. This is not a center a frequency but an actual regulatory
* band edge.
* @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
- * frequency range, in KHz. If not present or 0, maximum available
- * bandwidth should be calculated base on contiguous rules and wider
- * channels will be allowed to cross multiple contiguous/overlapping
- * frequency ranges.
+ * frequency range, in KHz.
* @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
* for a given frequency range. The value is in mBi (100 * dBi).
* If you don't have one then don't send this.
@@ -2511,6 +2508,9 @@ enum nl80211_sched_scan_match_attr {
* @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
* this includes probe requests or modes of operation that require
* beaconing.
+ * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
+ * base on contiguous rules and wider channels will be allowed to cross
+ * multiple contiguous/overlapping frequency ranges.
*/
enum nl80211_reg_rule_flags {
NL80211_RRF_NO_OFDM = 1<<0,
@@ -2522,6 +2522,7 @@ enum nl80211_reg_rule_flags {
NL80211_RRF_PTMP_ONLY = 1<<6,
NL80211_RRF_NO_IR = 1<<7,
__NL80211_RRF_NO_IBSS = 1<<8,
+ NL80211_RRF_AUTO_BW = 1<<9,
};
#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
diff --git a/net/wireless/genregdb.awk b/net/wireless/genregdb.awk
index 9a8217d..fdfd3f0 100644
--- a/net/wireless/genregdb.awk
+++ b/net/wireless/genregdb.awk
@@ -105,6 +105,8 @@ function parse_reg_rule()
flags = flags "\n\t\t\tNL80211_RRF_NO_IR | "
} else if (flagarray[arg] == "NO-IR") {
flags = flags "\n\t\t\tNL80211_RRF_NO_IR | "
+ } else if (flagarray[arg] == "AUTO-BW") {
+ flags = flags "\n\t\t\tNL80211_RRF_AUTO_BW | "
}
}
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 1797864..71a1fdb 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -4626,6 +4626,8 @@ static int parse_reg_rule(struct nlattr *tb[],
return -EINVAL;
if (!tb[NL80211_ATTR_FREQ_RANGE_END])
return -EINVAL;
+ if (!tb[NL80211_ATTR_FREQ_RANGE_MAX_BW])
+ return -EINVAL;
if (!tb[NL80211_ATTR_POWER_RULE_MAX_EIRP])
return -EINVAL;
@@ -4635,9 +4637,8 @@ static int parse_reg_rule(struct nlattr *tb[],
nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_START]);
freq_range->end_freq_khz =
nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_END]);
- if (tb[NL80211_ATTR_FREQ_RANGE_MAX_BW])
- freq_range->max_bandwidth_khz =
- nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_MAX_BW]);
+ freq_range->max_bandwidth_khz =
+ nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_MAX_BW]);
power_rule->max_eirp =
nla_get_u32(tb[NL80211_ATTR_POWER_RULE_MAX_EIRP]);
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 27c5253..7e09b4e 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -563,9 +563,6 @@ unsigned int reg_get_max_bandwidth(const struct ieee80211_regdomain *rd,
if (freq_range_tmp->end_freq_khz < freq_range->start_freq_khz)
break;
- if (freq_range_tmp->max_bandwidth_khz)
- break;
-
freq_range = freq_range_tmp;
}
@@ -582,9 +579,6 @@ unsigned int reg_get_max_bandwidth(const struct ieee80211_regdomain *rd,
if (freq_range_tmp->start_freq_khz > freq_range->end_freq_khz)
break;
- if (freq_range_tmp->max_bandwidth_khz)
- break;
-
freq_range = freq_range_tmp;
}
@@ -729,21 +723,29 @@ static int reg_rules_intersect(const struct ieee80211_regdomain *rd1,
max_bandwidth1 = freq_range1->max_bandwidth_khz;
max_bandwidth2 = freq_range2->max_bandwidth_khz;
- /*
- * In case max_bandwidth1 == 0 and max_bandwith2 == 0 set
- * output bandwidth as 0 (auto calculation). Next we will
- * calculate this correctly in handle_channel function.
- * In other case calculate output bandwidth here.
- */
- if (max_bandwidth1 || max_bandwidth2) {
- if (!max_bandwidth1)
- max_bandwidth1 = reg_get_max_bandwidth(rd1, rule1);
- if (!max_bandwidth2)
- max_bandwidth2 = reg_get_max_bandwidth(rd2, rule2);
- }
+ if (rule1->flags & NL80211_RRF_AUTO_BW)
+ max_bandwidth1 = reg_get_max_bandwidth(rd1, rule1);
+ if (rule2->flags & NL80211_RRF_AUTO_BW)
+ max_bandwidth2 = reg_get_max_bandwidth(rd2, rule2);
freq_range->max_bandwidth_khz = min(max_bandwidth1, max_bandwidth2);
+ intersected_rule->flags = rule1->flags | rule2->flags;
+
+ /*
+ * In case NL80211_RRF_AUTO_BW requested for both rules
+ * set AUTO_BW in intersected rule also. Next we will
+ * calculate BW correctly in handle_channel function.
+ * In other case remove AUTO_BW flag while we calculate
+ * maximum bandwidth correctly and auto calculation is
+ * not required.
+ */
+ if ((rule1->flags & NL80211_RRF_AUTO_BW) &&
+ (rule2->flags & NL80211_RRF_AUTO_BW))
+ intersected_rule->flags |= NL80211_RRF_AUTO_BW;
+ else
+ intersected_rule->flags &= ~NL80211_RRF_AUTO_BW;
+
freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz;
if (freq_range->max_bandwidth_khz > freq_diff)
freq_range->max_bandwidth_khz = freq_diff;
@@ -753,8 +755,6 @@ static int reg_rules_intersect(const struct ieee80211_regdomain *rd1,
power_rule->max_antenna_gain = min(power_rule1->max_antenna_gain,
power_rule2->max_antenna_gain);
- intersected_rule->flags = rule1->flags | rule2->flags;
-
if (!is_valid_reg_rule(intersected_rule))
return -EINVAL;
@@ -938,12 +938,13 @@ const char *reg_initiator_name(enum nl80211_reg_initiator initiator)
EXPORT_SYMBOL(reg_initiator_name);
#ifdef CONFIG_CFG80211_REG_DEBUG
-static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan,
+static void chan_reg_rule_print_dbg(const struct ieee80211_regdomain *regd,
+ struct ieee80211_channel *chan,
const struct ieee80211_reg_rule *reg_rule)
{
const struct ieee80211_power_rule *power_rule;
const struct ieee80211_freq_range *freq_range;
- char max_antenna_gain[32];
+ char max_antenna_gain[32], bw[32];
power_rule = ®_rule->power_rule;
freq_range = ®_rule->freq_range;
@@ -953,16 +954,25 @@ static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan,
else
snprintf(max_antenna_gain, 32, "%d", power_rule->max_antenna_gain);
+ if (reg_rule->flags & NL80211_RRF_AUTO_BW)
+ snprintf(bw, 32, "%d KHz, %d KHz AUTO",
+ freq_range->max_bandwidth_khz,
+ reg_get_max_bandwidth(regd, reg_rule));
+ else
+ snprintf(bw, 32, "%d KHz",
+ freq_range->max_bandwidth_khz);
+
REG_DBG_PRINT("Updating information on frequency %d MHz with regulatory rule:\n",
chan->center_freq);
- REG_DBG_PRINT("%d KHz - %d KHz @ %d KHz), (%s mBi, %d mBm)\n",
+ REG_DBG_PRINT("%d KHz - %d KHz @ %s), (%s mBi, %d mBm)\n",
freq_range->start_freq_khz, freq_range->end_freq_khz,
- freq_range->max_bandwidth_khz, max_antenna_gain,
+ bw, max_antenna_gain,
power_rule->max_eirp);
}
#else
-static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan,
+static void chan_reg_rule_print_dbg(const struct ieee80211_regdomain *regd,
+ struct ieee80211_channel *chan,
const struct ieee80211_reg_rule *reg_rule)
{
return;
@@ -1022,17 +1032,16 @@ static void handle_channel(struct wiphy *wiphy,
return;
}
- chan_reg_rule_print_dbg(chan, reg_rule);
+ regd = reg_get_regdomain(wiphy);
+ chan_reg_rule_print_dbg(regd, chan, reg_rule);
power_rule = ®_rule->power_rule;
freq_range = ®_rule->freq_range;
max_bandwidth_khz = freq_range->max_bandwidth_khz;
/* Check if auto calculation requested */
- if (!max_bandwidth_khz) {
- regd = reg_get_regdomain(wiphy);
+ if (reg_rule->flags & NL80211_RRF_AUTO_BW)
max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
- }
if (max_bandwidth_khz < MHZ_TO_KHZ(40))
bw_flags = IEEE80211_CHAN_NO_HT40;
@@ -1437,14 +1446,14 @@ static void handle_channel_custom(struct wiphy *wiphy,
return;
}
- chan_reg_rule_print_dbg(chan, reg_rule);
+ chan_reg_rule_print_dbg(regd, chan, reg_rule);
power_rule = ®_rule->power_rule;
freq_range = ®_rule->freq_range;
max_bandwidth_khz = freq_range->max_bandwidth_khz;
/* Check if auto calculation requested */
- if (!max_bandwidth_khz)
+ if (reg_rule->flags & NL80211_RRF_AUTO_BW)
max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
if (max_bandwidth_khz < MHZ_TO_KHZ(40))
@@ -2254,8 +2263,9 @@ static void print_rd_rules(const struct ieee80211_regdomain *rd)
freq_range = ®_rule->freq_range;
power_rule = ®_rule->power_rule;
- if (!freq_range->max_bandwidth_khz)
- snprintf(bw, 32, "%d KHz, AUTO",
+ if (reg_rule->flags & NL80211_RRF_AUTO_BW)
+ snprintf(bw, 32, "%d KHz, %d KHz AUTO",
+ freq_range->max_bandwidth_khz,
reg_get_max_bandwidth(rd, reg_rule));
else
snprintf(bw, 32, "%d KHz",
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
