Fixed a few coding style issues, things like comments and braces.
Signed-off-by: Justin van Wijngaarden <justinvanwijngaarden@xxxxxxxxx>
---
drivers/net/wireless/mac80211_hwsim.c | 101 ++++++++++++++++------------------
1 file changed, 47 insertions(+), 54 deletions(-)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 69d4c31..4a1ce5b 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1,19 +1,17 @@
-/*
- * mac80211_hwsim - software simulator of 802.11 radio(s) for mac80211
+/* mac80211_hwsim - software simulator of 802.11 radio(s) for mac80211
* Copyright (c) 2008, Jouni Malinen <j@xxxxx>
* Copyright (c) 2011, Javier Lopez <jlopex@xxxxxxxxx>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- */
+*/
-/*
- * TODO:
+/* TODO:
* - Add TSF sync and fix IBSS beacon transmission by adding
* competition for "air time" at TBTT
* - RX filtering based on filter configuration (data->rx_filter)
- */
+*/
#include <linux/list.h>
#include <linux/slab.h>
@@ -49,11 +47,11 @@ static int channels = 1;
module_param(channels, int, 0444);
MODULE_PARM_DESC(channels, "Number of concurrent channels");
-static bool paged_rx = false;
+static bool paged_rx;
module_param(paged_rx, bool, 0644);
MODULE_PARM_DESC(paged_rx, "Use paged SKBs for RX instead of linear ones");
-static bool rctbl = false;
+static bool rctbl;
module_param(rctbl, bool, 0444);
MODULE_PARM_DESC(rctbl, "Handle rate control table");
@@ -70,27 +68,27 @@ MODULE_PARM_DESC(rctbl, "Handle rate control table");
* and all possible combinations.
*
* @HWSIM_REGTEST_DISABLED: No regulatory tests are performed,
- * this is the default value.
+ * this is the default value.
* @HWSIM_REGTEST_DRIVER_REG_FOLLOW: Used for testing the driver regulatory
* hint, only one driver regulatory hint will be sent as such the
- * secondary radios are expected to follow.
+ * secondary radios are expected to follow.
* @HWSIM_REGTEST_DRIVER_REG_ALL: Used for testing the driver regulatory
- * request with all radios reporting the same regulatory domain.
+ * request with all radios reporting the same regulatory domain.
* @HWSIM_REGTEST_DIFF_COUNTRY: Used for testing the drivers calling
- * different regulatory domains requests. Expected behaviour is for
- * an intersection to occur but each device will still use their
- * respective regulatory requested domains. Subsequent radios will
- * use the resulting intersection.
+ * different regulatory domains requests. Expected behaviour is for
+ * an intersection to occur but each device will still use their
+ * respective regulatory requested domains. Subsequent radios will
+ * use the resulting intersection.
* @HWSIM_REGTEST_WORLD_ROAM: Used for testing the world roaming. We accomplish
* this by using a custom beacon-capable regulatory domain for the first
* radio. All other device world roam.
* @HWSIM_REGTEST_CUSTOM_WORLD: Used for testing the custom world regulatory
- * domain requests. All radios will adhere to this custom world regulatory
- * domain.
+ * domain requests. All radios will adhere to this custom world regulatory
+ * domain.
* @HWSIM_REGTEST_CUSTOM_WORLD_2: Used for testing 2 custom world regulatory
- * domain requests. The first radio will adhere to the first custom world
- * regulatory domain, the second one to the second custom world regulatory
- * domain. All other devices will world roam.
+ * domain requests. The first radio will adhere to the first custom world
+ * regulatory domain, the second one to the second custom world regulatory
+ * domain. All other devices will world roam.
* @HWSIM_REGTEST_STRICT_FOLLOW_: Used for testing strict regulatory domain
* settings, only the first radio will send a regulatory domain request
* and use strict settings. The rest of the radios are expected to follow.
@@ -104,15 +102,15 @@ MODULE_PARM_DESC(rctbl, "Handle rate control table");
* other devices should follow the intersection created between the
* first two.
* @HWSIM_REGTEST_ALL: Used for testing every possible mix. You will need
- * at least 6 radios for a complete test. We will test in this order:
- * 1 - driver custom world regulatory domain
- * 2 - second custom world regulatory domain
- * 3 - first driver regulatory domain request
- * 4 - second driver regulatory domain request
- * 5 - strict regulatory domain settings using the third driver regulatory
- * domain request
- * 6 and on - should follow the intersection of the 3rd, 4rth and 5th radio
- * regulatory requests.
+ * at least 6 radios for a complete test. We will test in this order:
+ * 1 - driver custom world regulatory domain
+ * 2 - second custom world regulatory domain
+ * 3 - first driver regulatory domain request
+ * 4 - second driver regulatory domain request
+ * 5 - strict regulatory domain settings using the third driver regulatory
+ * domain request
+ * 6 and on - should follow the intersection of the 3rd, 4rth and 5th radio
+ * regulatory requests.
*/
enum hwsim_regtest {
HWSIM_REGTEST_DISABLED = 0,
@@ -406,8 +404,7 @@ struct mac80211_hwsim_data {
struct dentry *debugfs;
struct sk_buff_head pending; /* packets pending */
- /*
- * Only radios in the same group can communicate together (the
+ /* Only radios in the same group can communicate together (the
* channel has to match too). Each bit represents a group. A
* radio can be in more then one group.
*/
@@ -764,11 +761,13 @@ static bool hwsim_ps_rx_ok(struct mac80211_hwsim_data *data,
return false;
case PS_AUTO_POLL:
/* TODO: accept (some) Beacons by default and other frames only
- * if pending PS-Poll has been sent */
+ * if pending PS-Poll has been sent
+ */
return true;
case PS_MANUAL_POLL:
/* Allow unicast frames to own address if there is a pending
- * PS-Poll */
+ * PS-Poll
+ */
if (data->ps_poll_pending &&
memcmp(data->hw->wiphy->perm_addr, skb->data + 4,
ETH_ALEN) == 0) {
@@ -856,7 +855,8 @@ static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
goto nla_put_failure;
/* We get the flags for this transmission, and we translate them to
- wmediumd flags */
+ * wmediumd flags
+ */
if (info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)
hwsim_flags |= HWSIM_TX_CTL_REQ_TX_STATUS;
@@ -966,8 +966,7 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw,
secpath_reset(skb);
nf_reset(skb);
- /*
- * Get absolute mactime here so all HWs RX at the "same time", and
+ /* Get absolute mactime here so all HWs RX at the "same time", and
* absolute TX time for beacon mactime so the timestamp matches.
* Giving beacons a different mactime than non-beacons looks messy, but
* it helps the Toffset be exact and a ~10us mactime discrepancy
@@ -1007,8 +1006,7 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw,
continue;
}
- /*
- * reserve some space for our vendor and the normal
+ /* reserve some space for our vendor and the normal
* radiotap header, since we're copying anyway
*/
if (skb->len < PAGE_SIZE && paged_rx) {
@@ -1036,8 +1034,7 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw,
rx_status.mactime = now + data2->tsf_offset;
#if 0
- /*
- * Don't enable this code by default as the OUI 00:00:00
+ /* Don't enable this code by default as the OUI 00:00:00
* is registered to Xerox so we shouldn't use it here, it
* might find its way into pcap files.
* Note that this code requires the headroom in the SKB
@@ -1047,8 +1044,7 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw,
rx_status.vendor_radiotap_oui[1] = 0x00;
rx_status.vendor_radiotap_oui[2] = 0x00;
rx_status.vendor_radiotap_subns = 127;
- /*
- * Radiotap vendor namespaces can (and should) also be
+ /* Radiotap vendor namespaces can (and should) also be
* split into fields by using the standard radiotap
* presence bitmap mechanism. Use just BIT(0) here for
* the presence bitmap.
@@ -1197,8 +1193,7 @@ static int mac80211_hwsim_change_interface(struct ieee80211_hw *hw,
newtype, vif->addr);
hwsim_check_magic(vif);
- /*
- * interface may change from non-AP to AP in
+ /* interface may change from non-AP to AP in
* which case this needs to be set up again
*/
vif->cab_queue = 0;
@@ -1371,7 +1366,7 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
static void mac80211_hwsim_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
- unsigned int *total_flags,u64 multicast)
+ unsigned int *total_flags, u64 multicast)
{
struct mac80211_hwsim_data *data = hw->priv;
@@ -1465,9 +1460,8 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
info->use_short_preamble);
}
- if (changed & BSS_CHANGED_ERP_SLOT) {
+ if (changed & BSS_CHANGED_ERP_SLOT)
wiphy_debug(hw->wiphy, " ERP_SLOT: %d\n", info->use_short_slot);
- }
if (changed & BSS_CHANGED_HT) {
wiphy_debug(hw->wiphy, " HT: op_mode=0x%x\n",
@@ -1556,8 +1550,7 @@ static int mac80211_hwsim_get_survey(
/* Current channel */
survey->channel = conf->chandef.chan;
- /*
- * Magically conjured noise level --- this is only ok for simulated hardware.
+ /* Magically conjured noise level --- this is only ok for simulated hardware.
*
* A real driver which cannot determine the real channel noise MUST NOT
* report any noise, especially not a magically conjured one :-)
@@ -1569,8 +1562,7 @@ static int mac80211_hwsim_get_survey(
}
#ifdef CONFIG_NL80211_TESTMODE
-/*
- * This section contains example code for using netlink
+/* This section contains example code for using netlink
* attributes with the testmode command in nl80211.
*/
@@ -2191,9 +2183,9 @@ static void mac80211_hwsim_free(void)
}
static const struct net_device_ops hwsim_netdev_ops = {
- .ndo_start_xmit = hwsim_mon_xmit,
+ .ndo_start_xmit = hwsim_mon_xmit,
.ndo_change_mtu = eth_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
+ .ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
};
@@ -2274,7 +2266,8 @@ static int hwsim_tx_info_frame_received_nl(struct sk_buff *skb_2,
goto out;
/* Tx info received because the frame was broadcasted on user space,
- so we get all the necessary info: tx attempts and skb control buff */
+ * so we get all the necessary info: tx attempts and skb control buff
+ */
tx_attempts = (struct hwsim_tx_rate *)nla_data(
info->attrs[HWSIM_ATTR_TX_INFO]);
--
1.9.rc1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
