From: Pontus Fuchs <pontus.fuchs@xxxxxxxxx>
On some wcnss firmwares the start command can take up to 300ms to
complete. Currently there is a 200ms timeout for SMD command to
complete which causes the start to fail.
Increase the timeout to 500ms. Also improve debug information
regarding SMD command completion time.
Signed-off-by: Pontus Fuchs <pontus.fuchs@xxxxxxxxx>
---
drivers/net/wireless/ath/wcn36xx/smd.c | 7 ++++++-
drivers/net/wireless/ath/wcn36xx/smd.h | 2 +-
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 425365c..ad93cc7 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -195,9 +195,11 @@ static void wcn36xx_smd_set_sta_params(struct wcn36xx *wcn,
static int wcn36xx_smd_send_and_wait(struct wcn36xx *wcn, size_t len)
{
int ret = 0;
+ unsigned long start;
wcn36xx_dbg_dump(WCN36XX_DBG_SMD_DUMP, "HAL >>> ", wcn->hal_buf, len);
init_completion(&wcn->hal_rsp_compl);
+ start = jiffies;
ret = wcn->ctrl_ops->tx(wcn->hal_buf, len);
if (ret) {
wcn36xx_err("HAL TX failed\n");
@@ -205,10 +207,13 @@ static int wcn36xx_smd_send_and_wait(struct wcn36xx *wcn, size_t len)
}
if (wait_for_completion_timeout(&wcn->hal_rsp_compl,
msecs_to_jiffies(HAL_MSG_TIMEOUT)) <= 0) {
- wcn36xx_err("Timeout while waiting SMD response\n");
+ wcn36xx_err("Timeout! No SMD response in %dms\n",
+ HAL_MSG_TIMEOUT);
ret = -ETIME;
goto out;
}
+ wcn36xx_dbg(WCN36XX_DBG_SMD, "SMD command completed in %dms",
+ jiffies_to_msecs(jiffies - start));
out:
return ret;
}
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h
index e7c3901..c46246f 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.h
+++ b/drivers/net/wireless/ath/wcn36xx/smd.h
@@ -24,7 +24,7 @@
#define WCN36XX_HAL_BUF_SIZE 4096
-#define HAL_MSG_TIMEOUT 200
+#define HAL_MSG_TIMEOUT 500
#define WCN36XX_SMSM_WLAN_TX_ENABLE 0x00000400
#define WCN36XX_SMSM_WLAN_TX_RINGS_EMPTY 0x00000200
/* The PNO version info be contained in the rsp msg */
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
