yes...^^ forgot it. current environment : vanilla kernel 2.6.23.16 compat wireless 2.6 driver (date : Dec, 2007) chipset : AR5414 3com 3CRDAG675B loading module, dmesg: ---------------------------------------------------------------------------- --------------------- ath5k_pci 0000:02:0b.0: registered as 'phy0' ath5k phy0: Device only partially supported. phy0: Selected rate control algorithm 'simple' ath5k phy0: Atheros AR5414 chip found (MAC: 0xa5, PHY: 0x61) net wlan2: device_rename: sysfs_create_symlink failed (-17) udev: renamed network interface wlan0 to wlan2 ADDRCONF(NETDEV_UP): wlan2: link is not ready ---------------------------------------------------------------------------- -------------------- -----Original Message----- From: bruno randolf [mailto:bruno@xxxxxxxxxxxxx] Sent: Tuesday, February 26, 2008 3:07 PM To: cs010101@xxxxxxxxx Cc: linux-wireless@xxxxxxxxxxxxxxx Subject: Re: ath5k : test hello 김영환! thanks for the report, however it's very important to tell us which hardware you are using. see the output of dmesg after ath5k is loaded and please include that in the next report. bruno On Tuesday 26 February 2008 14:22:58 김영환 wrote: > date : 26, Feb (driver's also same) > > conclusion: > > setting 802.11a ad-hoc, > > 5Ghz channel is different. > > and iwconfig wlanX rate [more than 24Mbps] : disconnected! > > and when I testing, performance was terrible. so often stalled. > > so, I made 'mod_timer' comment in base.c (calibration section) and > then performance was increased. > > BUT also when I set more than 24Mb, disconnected. > > but until now, only atheros driver supports 802.11a with ad-hoc. thanks. > :-) > > hmm... > soon or later, we'll test ralink chipset. > > > -- > -- > Have a Wonderful Day~~!! > 김영환 (James-Youngwhan Kim) > yhkim@xxxxxxxxxxxxxx > cs010101@xxxxxxxxx > +82-42-863-0340 > +82-10-6753-0987 > HTVC 3106 KAIST, 373-1 Guseong-dong, Yuseong-gu, Daejon, Republic of > Korea > 305-701 > > - > To unsubscribe from this list: send the line "unsubscribe linux-wireless" > in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo > info at http://vger.kernel.org/majordomo-info.html - To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
