From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
In chips like AR955x, the initvals contain the information
whether IQ calibration is to be done in the HW when an
AGC calibration is triggered. Check if IQ-CAL is enabled
in the initvals before flagging 'txiqcal_done' as true.
Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 225b758..0ee4250 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1485,7 +1485,12 @@ static bool ar9003_hw_init_cal_soc(struct ath_hw *ah,
* AGC calibration. Specifically, AR9550 in SoC chips.
*/
if (ah->enabled_cals & TX_IQ_ON_AGC_CAL) {
- txiqcal_done = true;
+ if (REG_READ_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_0,
+ AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL)) {
+ txiqcal_done = true;
+ } else {
+ txiqcal_done = false;
+ }
run_agc_cal = true;
} else {
sep_iq_cal = true;
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
