From: "andrea.merello" <andrea.merello@xxxxxxxxx>
- names of form FOOBAR_SHIFT, suggesting they should be used as
shift offset, for example
reg |= (1 << ENABLE_FOO_SHIFT).
However they are actually defined as (1 << x) and thus they are
used (correctly) like
reg |= ENABLE_FOO_SHIFT;
- RTL818X_TX_CONF_HW_SEQNUM that actually means _disable_ hardware
sequence number
This patch kills the misleading _SHIFT suffix and changes
RTL818X_TX_CONF_HW_SEQNUM with RTL818X_TX_CONF_SW_SEQNUM
Signed-off-by: andrea.merello <andrea.merello@xxxxxxxxx>
Signed-off-by: andrea merello <andrea.merello@xxxxxxxxx>
---
drivers/net/wireless/rtl818x/rtl8180/dev.c | 10 +++++-----
drivers/net/wireless/rtl818x/rtl8187/dev.c | 16 ++++++++--------
drivers/net/wireless/rtl818x/rtl818x.h | 12 ++++++------
3 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 8ec17aa..79b9398 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -602,13 +602,13 @@ static int rtl8180_start(struct ieee80211_hw *dev)
if (priv->r8185) {
reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
- reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
- reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
+ reg &= ~RTL818X_CW_CONF_PERPACKET_CW;
+ reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
- reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
- reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
reg |= RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
@@ -623,7 +623,7 @@ static int rtl8180_start(struct ieee80211_hw *dev)
if (priv->r8185)
reg &= ~RTL818X_TX_CONF_PROBE_DTS;
else
- reg &= ~RTL818X_TX_CONF_HW_SEQNUM;
+ reg &= ~RTL818X_TX_CONF_SW_SEQNUM;
/* different meaning, same value on both rtl8185 and rtl8180 */
reg &= ~RTL818X_TX_CONF_SAT_HWPLCP;
diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c
index fd78df8..b0b1730 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
@@ -785,7 +785,7 @@ static int rtl8187b_init_hw(struct ieee80211_hw *dev)
rtl818x_iowrite16(priv, (__le16 *)0xFF34, 0x0FFF);
reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
- reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
+ reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
/* Auto Rate Fallback Register (ARFR): 1M-54M setting */
@@ -943,13 +943,13 @@ static int rtl8187_start(struct ieee80211_hw *dev)
rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
- reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
- reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
rtl818x_iowrite32(priv, &priv->map->TX_CONF,
- RTL818X_TX_CONF_HW_SEQNUM |
+ RTL818X_TX_CONF_SW_SEQNUM |
RTL818X_TX_CONF_DISREQQSIZE |
(RETRY_COUNT << 8 /* short retry limit */) |
(RETRY_COUNT << 0 /* long retry limit */) |
@@ -986,13 +986,13 @@ static int rtl8187_start(struct ieee80211_hw *dev)
rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
- reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
- reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
+ reg &= ~RTL818X_CW_CONF_PERPACKET_CW;
+ reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
- reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
- reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
diff --git a/drivers/net/wireless/rtl818x/rtl818x.h b/drivers/net/wireless/rtl818x/rtl818x.h
index ce23dfd..89fe1d3 100644
--- a/drivers/net/wireless/rtl818x/rtl818x.h
+++ b/drivers/net/wireless/rtl818x/rtl818x.h
@@ -71,7 +71,7 @@ struct rtl818x_csr {
#define RTL818X_TX_CONF_HWVER_MASK (7 << 25)
#define RTL818X_TX_CONF_DISREQQSIZE (1 << 28)
#define RTL818X_TX_CONF_PROBE_DTS (1 << 29)
-#define RTL818X_TX_CONF_HW_SEQNUM (1 << 30)
+#define RTL818X_TX_CONF_SW_SEQNUM (1 << 30)
#define RTL818X_TX_CONF_CW_MIN (1 << 31)
__le32 RX_CONF;
#define RTL818X_RX_CONF_MONITOR (1 << 0)
@@ -144,9 +144,9 @@ struct rtl818x_csr {
__le32 HSSI_PARA;
u8 reserved_13[4];
u8 TX_AGC_CTL;
-#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT (1 << 0)
-#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT (1 << 1)
-#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT (1 << 2)
+#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN (1 << 0)
+#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL (1 << 1)
+#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT (1 << 2)
u8 TX_GAIN_CCK;
u8 TX_GAIN_OFDM;
u8 TX_ANTENNA;
@@ -158,8 +158,8 @@ struct rtl818x_csr {
u8 SLOT;
u8 reserved_16[5];
u8 CW_CONF;
-#define RTL818X_CW_CONF_PERPACKET_CW_SHIFT (1 << 0)
-#define RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT (1 << 1)
+#define RTL818X_CW_CONF_PERPACKET_CW (1 << 0)
+#define RTL818X_CW_CONF_PERPACKET_RETRY (1 << 1)
u8 CW_VAL;
u8 RATE_FALLBACK;
#define RTL818X_RATE_FALLBACK_ENABLE (1 << 7)
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
