Search Linux Wireless

Re: [PATCH v2 9/9] wil6210: Use pci_enable_msi_range()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jan 17, 2014 at 05:02:23PM +0100, Alexander Gordeev wrote:
> As result deprecation of MSI-X/MSI enablement functions
> pci_enable_msix() and pci_enable_msi_block() all drivers
> using these two interfaces need to be updated to use the
> new pci_enable_msi_range() and pci_enable_msix_range()
> interfaces.
> 
> Signed-off-by: Alexander Gordeev <agordeev@xxxxxxxxxx>
> Acked-by: Vladimir Kondratiev <qca_vkondrat@xxxxxxxxxxxxxxxx>

Applied to my pci/msi branch, thanks!

> ---
>  drivers/net/wireless/ath/wil6210/pcie_bus.c |   36 ++++++++++++++------------
>  1 files changed, 19 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
> index eeceab3..4e1bf54 100644
> --- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
> +++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
> @@ -41,30 +41,32 @@ static int wil_if_pcie_enable(struct wil6210_priv *wil)
>  	switch (use_msi) {
>  	case 3:
>  	case 1:
> +		wil_dbg_misc(wil, "Setup %d MSI interrupts\n", use_msi);
> +		break;
>  	case 0:
> +		wil_dbg_misc(wil, "MSI interrupts disabled, use INTx\n");
>  		break;
>  	default:
> -		wil_err(wil, "Invalid use_msi=%d, default to 1\n",
> -			use_msi);
> +		wil_err(wil, "Invalid use_msi=%d, default to 1\n", use_msi);
>  		use_msi = 1;
>  	}
> -	wil->n_msi = use_msi;
> -	if (wil->n_msi) {
> -		wil_dbg_misc(wil, "Setup %d MSI interrupts\n", use_msi);
> -		rc = pci_enable_msi_block(pdev, wil->n_msi);
> -		if (rc && (wil->n_msi == 3)) {
> -			wil_err(wil, "3 MSI mode failed, try 1 MSI\n");
> -			wil->n_msi = 1;
> -			rc = pci_enable_msi_block(pdev, wil->n_msi);
> -		}
> -		if (rc) {
> -			wil_err(wil, "pci_enable_msi failed, use INTx\n");
> -			wil->n_msi = 0;
> -		}
> -	} else {
> -		wil_dbg_misc(wil, "MSI interrupts disabled, use INTx\n");
> +
> +	switch (use_msi) {
> +	case 3:
> +		if (pci_enable_msi_range(pdev, 3, 3) > 0)
> +			break;
> +		wil_err(wil, "3 MSI mode failed, try 1 MSI\n");
> +		use_msi = 1;
> +		/* fallthrough */
> +	case 1:
> +		if (!pci_enable_msi(pdev))
> +			break;
> +		wil_err(wil, "pci_enable_msi failed, use INTx\n");
> +		use_msi = 0;
>  	}
>  
> +	wil->n_msi = use_msi;
> +
>  	rc = wil6210_init_irq(wil, pdev->irq);
>  	if (rc)
>  		goto stop_master;
> -- 
> 1.7.7.6
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux