Hello, I'm trying to bring up a SDIO card that has a AR6103 wifi module on it . I have copied AR6003 from linux-firmware to /lib/firmware in my rootfs and renamed bdata.SD31.bin to bdata.bin but I can't get it to work. This are the error messages I get when I plug the card into my SDIO slot. [ 368.966731] mmc0: queuing unknown CIS tuple 0x01 (3 bytes) [ 368.986778] mmc0: queuing unknown CIS tuple 0x1a (5 bytes) [ 368.997861] mmc0: queuing unknown CIS tuple 0x1b (8 bytes) [ 369.005315] mmc0: queuing unknown CIS tuple 0x14 (0 bytes) [ 369.020520] mmc0: queuing unknown CIS tuple 0x80 (1 bytes) [ 369.026470] mmc0: queuing unknown CIS tuple 0x81 (1 bytes) [ 369.034130] mmc0: queuing unknown CIS tuple 0x82 (1 bytes) [ 369.041074] mmc0: new high speed SDIO card at address 0001 [ 370.601696] ath6kl_sdio mmc0:0001:1: Direct firmware load failed with error -2 [ 370.608987] ath6kl_sdio mmc0:0001:1: Falling back to user helper [ 400.715813] ath6kl_sdio mmc0:0001:1: Direct firmware load failed with error -2 [ 400.723368] ath6kl_sdio mmc0:0001:1: Falling back to user helper [ 400.911561] ath6kl: temporary war to avoid sdio crc error [ 401.446677] ath6kl: Failed to claim sdio irq: -12 [ 401.453973] ath6kl: wmi is not ready or wait was interrupted: -512 [ 401.463383] ath6kl: Failed to start hardware: -5 [ 401.472617] ath6kl: Failed to init ath6kl core [ 401.478326] ath6kl_sdio: probe of mmc0:0001:1 failed with error -5 Best regards, Marten Wikman -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
