From: Eyal Shapira <eyal@xxxxxxxxxx>
Keeping this as 0 is ok according to spec section 9.7.11
as this means the limits are according to the Tx/Rx
supported MCS x NSS bitmap. Initially we've set these as
there were concerns of interop issues but these turned out
to be false.
Signed-off-by: Eyal Shapira <eyalx.shapira@xxxxxxxxx>
Reviewed-by: Johannes Berg <johannes.berg@xxxxxxxxx>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@xxxxxxxxx>
---
drivers/net/wireless/iwlwifi/iwl-nvm-parse.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
index 0c677b4..f06f4cb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -289,9 +289,6 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg,
IEEE80211_VHT_MCS_NOT_SUPPORTED << 12 |
IEEE80211_VHT_MCS_NOT_SUPPORTED << 14);
- /* Max rate for Long GI NSS=2 80Mhz is 780Mbps */
- vht_cap->vht_mcs.rx_highest = cpu_to_le16(780);
-
if (num_ants == 1 ||
cfg->rx_with_siso_diversity) {
vht_cap->cap |= IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN |
@@ -299,12 +296,9 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg,
/* this works because NOT_SUPPORTED == 3 */
vht_cap->vht_mcs.rx_mcs_map |=
cpu_to_le16(IEEE80211_VHT_MCS_NOT_SUPPORTED << 2);
- /* Max rate for Long GI NSS=1 80Mhz is 390Mbps */
- vht_cap->vht_mcs.rx_highest = cpu_to_le16(390);
}
vht_cap->vht_mcs.tx_mcs_map = vht_cap->vht_mcs.rx_mcs_map;
- vht_cap->vht_mcs.tx_highest = vht_cap->vht_mcs.rx_highest;
}
static void iwl_init_sbands(struct device *dev, const struct iwl_cfg *cfg,
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
