Unfortunately, I have tried your mentioned firmware, but I am still getting the WMI_PEER_STA_KICKOUT_EVENTID. [ 159.020000] ath10k: wmi pdev set param 13 value 0 ..... [ 181.380000] ath10k: wmi peer assoc vdev 0 addr 04:f0:21:0c:a5:44 [ 182.000000] ath10k: wmi event debug mesg len 44 [ 182.040000] ath10k: WMI_PEER_STA_KICKOUT_EVENTID [ 183.040000] ath10k: WMI_PEER_STA_KICKOUT_EVENTID [ 184.040000] ath10k: WMI_PEER_STA_KICKOUT_EVENTID [ 185.040000] ath10k: WMI_PEER_STA_KICKOUT_EVENTID [ 185.580000] ath10k: wmi mgmt tx skb 86845f00 len 176 ftype 00 stype 50 [ 185.580000] ath10k: wmi mgmt tx skb 86846180 len 176 ftype 00 stype 50 [ 186.040000] ath10k: WMI_PEER_STA_KICKOUT_EVENTID [ 187.040000] ath10k: WMI_PEER_STA_KICKOUT_EVENTID [ 188.040000] ath10k: WMI_PEER_STA_KICKOUT_EVENTID [ 189.040000] ath10k: WMI_PEER_STA_KICKOUT_EVENTID [ 190.040000] ath10k: WMI_PEER_STA_KICKOUT_EVENTID [ 191.040000] ath10k: WMI_PEER_STA_KICKOUT_EVENTID [ 192.040000] ath10k: WMI_PEER_STA_KICKOUT_EVENTID [ 193.040000] ath10k: WMI_PEER_STA_KICKOUT_EVENTID [ 194.050000] ath10k: WMI_PEER_STA_KICKOUT_EVENTID [ 195.050000] ath10k: WMI_PEER_STA_KICKOUT_EVENTID # ethtool -i wlan0 driver: ath10k_pci version: 3.3.8 firmware-version: 10.1.467-1 Am I miss out something? ---- Chun-Yeow On Mon, Jan 13, 2014 at 4:40 PM, Marek Puzyniak <marek.puzyniak@xxxxxxxxx> wrote: > On 9 January 2014 10:09, Yeoh Chun-Yeow <yeohchunyeow@xxxxxxxxx> wrote: >> Hi, Marek > Hi, >> >> Do you mind to share which firmware that you are using? > > I am using FW from: > https://github.com/kvalo/ath10k-firmware/blob/master/ap/firmware-2.bin_10.1.467-1 > >> I have tried your patch and this is set accordingly in an the AP (set >> param 13). But once the associated STA is leaving, >> WMI_PEER_STA_KICKOUT_EVENTID is still received. >> >> [ 145.060000] ath10k: wmi pdev set param 13 value 0 >> ....... >> [ 148.560000] ath10k: wmi vdev id 0x0 set param 8 value 1 >> [ 148.560000] ath10k: wmi peer create vdev_id 0 peer_addr 04:f0:21:0c:a5:44 >> [ 148.560000] ath10k: wmi peer assoc vdev 0 addr 04:f0:21:0c:a5:44 >> [ 149.040000] ath10k: wmi event debug mesg len 44 >> [ 209.090000] ath10k: WMI_PEER_STA_KICKOUT_EVENTID >> [ 210.090000] ath10k: WMI_PEER_STA_KICKOUT_EVENTID >> >> FYI, I am using firmware version 999.999.0.636 >> >> ethtool -i wlan0 >> driver: ath10k_pci >> firmware-version: 999.999.0.636 >> >> Thanks >> >> Regards, >> Chun-Yeow > Marek >> >> >> On Wed, Jan 8, 2014 at 6:40 PM, Marek Puzyniak <marek.puzyniak@xxxxxxxxx> wrote: >>> On 2 January 2014 13:41, Yeoh Chun-Yeow <yeohchunyeow@xxxxxxxxx> wrote: >>>> >>>> On Dec 30, 2013 4:08 PM, "Marek Puzyniak" <marek.puzyniak@xxxxxxxxx> wrote: >>>>> >>>>> Currently ath10k is not using STA KICKOUT firmware functionality. >>>>> In order to avoid unwanted FW events this functionality should be >>>>> disabled when not used. >>>> >>>> What are unwanted FW events? >>> >>> WMI_PEER_STA_KICKOUT_EVENT which indicates lack of activity from >>> associated STA for specified period of time. >>> >>>> >>>> ---- >>>> Chun-Yeow >>> Marek >>>> >>>>> Signed-off-by: Marek Puzyniak <marek.puzyniak@xxxxxxxxx> >>>>> --- >>>>> drivers/net/wireless/ath/ath10k/mac.c | 9 +++++++++ >>>>> 1 file changed, 9 insertions(+) >>>>> >>>>> diff --git a/drivers/net/wireless/ath/ath10k/mac.c >>>>> b/drivers/net/wireless/ath/ath10k/mac.c >>>>> index 5b45f3a..93416ab 100644 >>>>> --- a/drivers/net/wireless/ath/ath10k/mac.c >>>>> +++ b/drivers/net/wireless/ath/ath10k/mac.c >>>>> @@ -2292,11 +2292,20 @@ static int ath10k_add_interface(struct >>>>> ieee80211_hw *hw, >>>>> } >>>>> >>>>> if (arvif->vdev_type == WMI_VDEV_TYPE_AP) { >>>>> + u32 param_id; >>>>> + >>>>> ret = ath10k_peer_create(ar, arvif->vdev_id, vif->addr); >>>>> if (ret) { >>>>> ath10k_warn("Failed to create peer for AP: %d\n", >>>>> ret); >>>>> goto err_vdev_delete; >>>>> } >>>>> + >>>>> + param_id = ar->wmi.pdev_param->sta_kickout_th; >>>>> + >>>>> + /* Disable STA KICKOUT functionality in FW */ >>>>> + ret = ath10k_wmi_pdev_set_param(ar, param_id, 0); >>>>> + if (ret) >>>>> + ath10k_warn("Failed to disable STA KICKOUT\n"); >>>>> } >>>>> >>>>> if (arvif->vdev_type == WMI_VDEV_TYPE_STA) { >>>>> -- >>>>> 1.8.1.2 >>>>> >>>>> >>>>> _______________________________________________ >>>>> ath10k mailing list >>>>> ath10k@xxxxxxxxxxxxxxxxxxx >>>>> http://lists.infradead.org/mailman/listinfo/ath10k -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
