From: Yogesh Ashok Powar <yogeshp@xxxxxxxxxxx>
Adding new device IDs and assigning generic function/variable
names instead of using device-id specific names.
Signed-off-by: Yogesh Ashok Powar <yogeshp@xxxxxxxxxxx>
Signed-off-by: Nishant Sarmukadam <nishants@xxxxxxxxxxx>
Signed-off-by: Bing Zhao <bzhao@xxxxxxxxxxx>
Signed-off-by: Frank Huang <frankh@xxxxxxxxxxx>
---
drivers/net/wireless/mwifiex/Kconfig | 4 +--
drivers/net/wireless/mwifiex/usb.c | 54 +++++++++++++++++++++++++++---------
drivers/net/wireless/mwifiex/usb.h | 12 +++++---
3 files changed, 51 insertions(+), 19 deletions(-)
diff --git a/drivers/net/wireless/mwifiex/Kconfig b/drivers/net/wireless/mwifiex/Kconfig
index f7ff472..ecdf345 100644
--- a/drivers/net/wireless/mwifiex/Kconfig
+++ b/drivers/net/wireless/mwifiex/Kconfig
@@ -31,12 +31,12 @@ config MWIFIEX_PCIE
mwifiex_pcie.
config MWIFIEX_USB
- tristate "Marvell WiFi-Ex Driver for USB8797"
+ tristate "Marvell WiFi-Ex Driver for USB8797/8897"
depends on MWIFIEX && USB
select FW_LOADER
---help---
This adds support for wireless adapters based on Marvell
- Avastar 88W8797 chipset with USB interface.
+ 8797/8897 chipset with USB interface.
If you choose to build it as a module, it will be called
mwifiex_usb.
diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c
index a9240a2..e8ebbd4 100644
--- a/drivers/net/wireless/mwifiex/usb.c
+++ b/drivers/net/wireless/mwifiex/usb.c
@@ -22,15 +22,21 @@
#define USB_VERSION "1.0"
-static const char usbdriver_name[] = "usb8797";
+static const char usbdriver_name[] = "usb8xxx";
static struct mwifiex_if_ops usb_ops;
static struct semaphore add_remove_card_sem;
static struct usb_card_rec *usb_card;
static struct usb_device_id mwifiex_usb_table[] = {
- {USB_DEVICE(USB8797_VID, USB8797_PID_1)},
- {USB_DEVICE_AND_INTERFACE_INFO(USB8797_VID, USB8797_PID_2,
+ /* 8797 */
+ {USB_DEVICE(USB8XXX_VID, USB8797_PID_1)},
+ {USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8797_PID_2,
+ USB_CLASS_VENDOR_SPEC,
+ USB_SUBCLASS_VENDOR_SPEC, 0xff)},
+ /* 8897 */
+ {USB_DEVICE(USB8XXX_VID, USB8897_PID_1)},
+ {USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8897_PID_2,
USB_CLASS_VENDOR_SPEC,
USB_SUBCLASS_VENDOR_SPEC, 0xff)},
{ } /* Terminating entry */
@@ -343,10 +349,20 @@ static int mwifiex_usb_probe(struct usb_interface *intf,
id_vendor, id_product, bcd_device);
/* PID_1 is used for firmware downloading only */
- if (id_product == USB8797_PID_1)
- card->usb_boot_state = USB8797_FW_DNLD;
- else
- card->usb_boot_state = USB8797_FW_READY;
+ switch (id_product) {
+ case USB8797_PID_1:
+ case USB8897_PID_1:
+ card->usb_boot_state = USB8XXX_FW_DNLD;
+ break;
+ case USB8797_PID_2:
+ case USB8897_PID_2:
+ card->usb_boot_state = USB8XXX_FW_READY;
+ break;
+ default:
+ pr_warning("unknown id_product %#x\n", id_product);
+ card->usb_boot_state = USB8XXX_FW_DNLD;
+ break;
+ }
card->udev = udev;
card->intf = intf;
@@ -755,9 +771,20 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
card->adapter = adapter;
adapter->dev = &card->udev->dev;
- strcpy(adapter->fw_name, USB8797_DEFAULT_FW_NAME);
usb_card = card;
+ switch (le16_to_cpu(card->udev->descriptor.idProduct)) {
+ case USB8897_PID_1:
+ case USB8897_PID_2:
+ strcpy(adapter->fw_name, USB8897_DEFAULT_FW_NAME);
+ break;
+ case USB8797_PID_1:
+ case USB8797_PID_2:
+ default:
+ strcpy(adapter->fw_name, USB8797_DEFAULT_FW_NAME);
+ break;
+ }
+
return 0;
}
@@ -773,7 +800,7 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
{
int ret = 0;
u8 *firmware = fw->fw_buf, *recv_buff;
- u32 retries = USB8797_FW_MAX_RETRY, dlen;
+ u32 retries = USB8XXX_FW_MAX_RETRY, dlen;
u32 fw_seqnum = 0, tlen = 0, dnld_cmd = 0;
struct fw_data *fwdata;
struct fw_sync_header sync_fw;
@@ -875,7 +902,7 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
continue;
}
- retries = USB8797_FW_MAX_RETRY;
+ retries = USB8XXX_FW_MAX_RETRY;
break;
}
fw_seqnum++;
@@ -899,13 +926,13 @@ static int mwifiex_usb_dnld_fw(struct mwifiex_adapter *adapter,
int ret;
struct usb_card_rec *card = (struct usb_card_rec *)adapter->card;
- if (card->usb_boot_state == USB8797_FW_DNLD) {
+ if (card->usb_boot_state == USB8XXX_FW_DNLD) {
ret = mwifiex_prog_fw_w_helper(adapter, fw);
if (ret)
return -1;
/* Boot state changes after successful firmware download */
- if (card->usb_boot_state == USB8797_FW_DNLD)
+ if (card->usb_boot_state == USB8XXX_FW_DNLD)
return -1;
}
@@ -1039,4 +1066,5 @@ MODULE_AUTHOR("Marvell International Ltd.");
MODULE_DESCRIPTION("Marvell WiFi-Ex USB Driver version" USB_VERSION);
MODULE_VERSION(USB_VERSION);
MODULE_LICENSE("GPL v2");
-MODULE_FIRMWARE("mrvl/usb8797_uapsta.bin");
+MODULE_FIRMWARE(USB8797_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(USB8897_DEFAULT_FW_NAME);
diff --git a/drivers/net/wireless/mwifiex/usb.h b/drivers/net/wireless/mwifiex/usb.h
index 98c4316..15b73d1 100644
--- a/drivers/net/wireless/mwifiex/usb.h
+++ b/drivers/net/wireless/mwifiex/usb.h
@@ -22,19 +22,23 @@
#include <linux/usb.h>
-#define USB8797_VID 0x1286
+#define USB8XXX_VID 0x1286
+
#define USB8797_PID_1 0x2043
#define USB8797_PID_2 0x2044
+#define USB8897_PID_1 0x2045
+#define USB8897_PID_2 0x2046
-#define USB8797_FW_DNLD 1
-#define USB8797_FW_READY 2
-#define USB8797_FW_MAX_RETRY 3
+#define USB8XXX_FW_DNLD 1
+#define USB8XXX_FW_READY 2
+#define USB8XXX_FW_MAX_RETRY 3
#define MWIFIEX_TX_DATA_URB 6
#define MWIFIEX_RX_DATA_URB 6
#define MWIFIEX_USB_TIMEOUT 100
#define USB8797_DEFAULT_FW_NAME "mrvl/usb8797_uapsta.bin"
+#define USB8897_DEFAULT_FW_NAME "mrvl/usb8897_uapsta.bin"
#define FW_DNLD_TX_BUF_SIZE 620
#define FW_DNLD_RX_BUF_SIZE 2048
--
1.8.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
