From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx> The small delay that is present between a RTC reset/clear operation is required for the chip to settle and this is needed for all chips, not just the AR9002 family. Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx> --- drivers/net/wireless/ath/ath9k/hw.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 40cc64b..f58868c 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1399,8 +1399,7 @@ static bool ath9k_hw_set_reset_power_on(struct ath_hw *ah) REGWRITE_BUFFER_FLUSH(ah); - if (!AR_SREV_9300_20_OR_LATER(ah)) - udelay(2); + udelay(2); if (!AR_SREV_9100(ah) && !AR_SREV_9300_20_OR_LATER(ah)) REG_WRITE(ah, AR_RC, 0); -- 1.8.5.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html