This file implements mesh discovery and peer link establishment support using
the mesh peer link table provided in mesh_plinktbl.c.
Secure peer links have not been implemented yet.
Signed-off-by: Luis Carlos Cobo <luisca@xxxxxxxxxxx>
---
net/mac80211/mesh_plink.c | 753 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 753 insertions(+), 0 deletions(-)
create mode 100644 net/mac80211/mesh_plink.c
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
new file mode 100644
index 0000000..d461d27
--- /dev/null
+++ b/net/mac80211/mesh_plink.c
@@ -0,0 +1,753 @@
+/*
+ * Copyright (c) 2008 open80211s Ltd.
+ * Author: Luis Carlos Cobo <luisca@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "ieee80211_i.h"
+#include "ieee80211_rate.h"
+#include "mesh.h"
+#include <linux/random.h>
+
+#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
+#define mpl_dbg(fmt, args...) printk(KERN_DEBUG fmt, ##args)
+#else
+#define mpl_dbg(fmt, args...) do { (void)(0); } while (0)
+#endif
+
+#define IEEE80211_FC(type, stype) cpu_to_le16(type | stype)
+#define PLINK_GET_FRAME_SUBTYPE(p) (p)
+#define PLINK_GET_LLID(p) (p + 1)
+#define PLINK_GET_PLID(p) (p + 3)
+
+#define mod_plink_timer(s, t) (mod_timer(&s->plink_timer, \
+ jiffies + HZ * t / 1000))
+
+/* Peer link cancel reasons, all subject to ANA approval */
+#define MESH_LINK_CANCELLED 2
+#define MESH_MAX_NEIGHBORS 3
+#define MESH_CAPABILITY_POLICY_VIOLATION 4
+#define MESH_CLOSE_RCVD 5
+#define MESH_MAX_RETRIES 6
+#define MESH_CONFIRM_TIMEOUT 7
+#define MESH_SECURITY_ROLE_NEGOTIATION_DIFFERS 8
+#define MESH_SECURITY_AUTHENTICATION_IMPOSSIBLE 9
+#define MESH_SECURITY_FAILED_VERIFICATION 10
+
+#define dot11MeshMaxRetries(s) (s->u.sta.mshcfg.dot11MeshMaxRetries)
+#define dot11MeshRetryTimeout(s) (s->u.sta.mshcfg.dot11MeshRetryTimeout)
+#define dot11MeshConfirmTimeout(s) (s->u.sta.mshcfg.dot11MeshConfirmTimeout)
+#define dot11MeshHoldingTimeout(s) (s->u.sta.mshcfg.dot11MeshHoldingTimeout)
+#define dot11MeshMaxPeerLinks(s) (s->u.sta.mshcfg.dot11MeshMaxPeerLinks)
+
+enum plink_frame_type {
+ PLINK_OPEN = 0,
+ PLINK_CONFIRM,
+ PLINK_CLOSE
+};
+
+enum plink_event {
+ PLINK_UNDEFINED,
+ OPN_ACPT,
+ OPN_RJCT,
+ OPN_IGNR,
+ CNF_ACPT,
+ CNF_RJCT,
+ CNF_IGNR,
+ CLS_ACPT,
+ CLS_IGNR
+};
+
+static inline
+void mesh_plink_inc_estab_count(struct ieee80211_sub_if_data *sdata)
+{
+ atomic_inc(&sdata->u.sta.mshstats.estab_plinks);
+ mesh_accept_plinks_update(sdata->dev);
+}
+
+static inline
+void mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata)
+{
+ atomic_dec(&sdata->u.sta.mshstats.estab_plinks);
+ mesh_accept_plinks_update(sdata->dev);
+}
+
+/**
+ * mesh_plink_fsm_restart - restart a mesh peer link finite state machine
+ *
+ * @sta: mes peer link to restart
+ *
+ * Locking: this function must be called holding sta->plink_lock
+ */
+static inline void mesh_plink_fsm_restart(struct sta_info *sta)
+{
+ sta->plink_state = LISTEN;
+ sta->llid = sta->plid = sta->reason = sta->plink_retries = 0;
+}
+
+/**
+ * mesh_plink_add - allocate and add a new mesh peer link
+ *
+ * @hw_addr: hardware address (ETH_ALEN length)
+ * @rates: rates the mesh peer supports
+ * @dev: local mesh interface
+ *
+ * The initial state of the new plink is set to LISTEN
+ *
+ * Returns: 0 on success
+ */
+struct sta_info *mesh_plink_add(u8 *hw_addr, u64 rates, struct net_device *dev)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct sta_info *sta;
+
+ if (memcmp(hw_addr, dev->dev_addr, ETH_ALEN) == 0)
+ /* never add ourselves as neighbours */
+ return NULL;
+
+ if (is_multicast_ether_addr(hw_addr))
+ return NULL;
+
+ if (local->num_sta >= MESH_MAX_PLINKS)
+ return NULL;
+
+ sta = sta_info_add(local, dev, hw_addr, GFP_KERNEL);
+ if (!sta)
+ return NULL;
+ sta->plink_state = LISTEN;
+ spin_lock_init(&sta->plink_lock);
+ init_timer(&sta->plink_timer);
+ sta->flags |= WLAN_STA_AUTHORIZED;
+ sta->supp_rates[local->hw.conf.channel->band] = rates;
+ rate_control_rate_init(sta, local);
+
+ mesh_accept_plinks_update(dev);
+ return sta;
+}
+
+/**
+ * mesh_plink_deactivate - deactivate mesh peer link
+ *
+ * @sta: mesh peer link to deactivate
+ *
+ * All mesh paths with this peer as next hop will be flushed
+ *
+ * Locking: the caller must hold sta->plink_lock
+ */
+void mesh_plink_deactivate(struct sta_info *sta)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev);
+ if (sta->plink_state == ESTAB)
+ mesh_plink_dec_estab_count(sdata);
+ sta->plink_state = BLOCKED;
+ mesh_path_flush_by_nexthop(sta);
+}
+
+static int mesh_plink_frame_tx(struct net_device *dev,
+ enum plink_frame_type action, u8 *da, __le16 llid, __le16 plid,
+ __le16 reason) {
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
+ struct ieee80211_mgmt *mgmt;
+ bool include_plid = false;
+ u8 *pos;
+ int ie_len;
+
+ if (!skb)
+ return -1;
+ skb_reserve(skb, local->hw.extra_tx_headroom);
+ /* 25 is the size of the common mgmt part (24) plus the size of the
+ * common action part (1)
+ */
+ mgmt = (struct ieee80211_mgmt *)
+ skb_put(skb, 25 + sizeof(mgmt->u.action.u.plink_action));
+ memset(mgmt, 0, 25 + sizeof(mgmt->u.action.u.plink_action));
+ mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
+ IEEE80211_STYPE_ACTION);
+ memcpy(mgmt->da, da, ETH_ALEN);
+ memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
+ /* BSSID is left zeroed, wildcard value */
+ mgmt->u.action.category = PLINK_CATEGORY;
+ mgmt->u.action.u.plink_action.action_code = action;
+
+ if (action == PLINK_CLOSE)
+ mgmt->u.action.u.plink_action.aux = reason;
+ else {
+ mgmt->u.action.u.plink_action.aux = cpu_to_le16(0x0);
+ if (action == PLINK_CONFIRM) {
+ pos = skb_put(skb, 4);
+ /* two-byte status code followed by two-byte AID */
+ memset(pos, 0, 4);
+ }
+ mesh_mgmt_ies_add(skb, dev);
+ }
+
+ /* Add Peer Link Management element */
+ switch (action) {
+ case PLINK_OPEN:
+ ie_len = 3;
+ break;
+ case PLINK_CONFIRM:
+ ie_len = 5;
+ include_plid = true;
+ break;
+ case PLINK_CLOSE:
+ default:
+ if (!plid)
+ ie_len = 5;
+ else {
+ ie_len = 7;
+ include_plid = true;
+ }
+ break;
+ }
+
+ pos = skb_put(skb, 2 + ie_len);
+ *pos++ = WLAN_EID_PEER_LINK;
+ *pos++ = ie_len;
+ *pos++ = action;
+ memcpy(pos, &llid, 2);
+ if (include_plid) {
+ pos += 2;
+ memcpy(pos, &plid, 2);
+ }
+ if (action == PLINK_CLOSE) {
+ pos += 2;
+ memcpy(pos, &reason, 2);
+ }
+
+ ieee80211_sta_tx(dev, skb, 0);
+ return 0;
+}
+
+void mesh_neighbour_update(u8 *hw_addr, u64 rates, struct net_device *dev,
+ bool peer_accepting_plinks)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct sta_info *sta;
+
+ sta = sta_info_get(local, hw_addr);
+ if (!sta) {
+ sta = mesh_plink_add(hw_addr, rates, dev);
+ if (!sta)
+ return;
+ }
+
+ sta->last_rx = jiffies;
+ sta->supp_rates[local->hw.conf.channel->band] = rates;
+ if (peer_accepting_plinks && sta->plink_state == LISTEN &&
+ sdata->u.sta.accepting_plinks &&
+ sdata->u.sta.mshcfg.auto_open_plinks)
+ mesh_plink_open(sta);
+
+ sta_info_put(sta);
+}
+
+static void mesh_plink_timer(unsigned long data)
+{
+ struct sta_info *sta;
+ __le16 llid, plid, reason;
+ struct net_device *dev = NULL;
+ struct ieee80211_sub_if_data *sdata;
+#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
+ DECLARE_MAC_BUF(mac);
+#endif
+
+ sta = (struct sta_info *) data;
+
+ spin_lock_bh(&sta->plink_lock);
+ if (sta->ignore_plink_timer) {
+ sta->ignore_plink_timer = false;
+ spin_unlock_bh(&sta->plink_lock);
+ return;
+ }
+ mpl_dbg("Mesh plink timer for %s fired on state %d\n",
+ print_mac(mac, sta->addr), sta->plink_state);
+ reason = 0;
+ llid = sta->llid;
+ plid = sta->plid;
+ dev = sta->dev;
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+ switch (sta->plink_state) {
+ case OPN_RCVD:
+ case OPN_SNT:
+ /* retry timer */
+ if (sta->plink_retries < dot11MeshMaxRetries(sdata)) {
+ u32 rand;
+ mpl_dbg("Mesh plink for %s (retry, timeout): %d %d\n",
+ print_mac(mac, sta->addr),
+ sta->plink_retries, sta->plink_timeout);
+ get_random_bytes(&rand, sizeof(u32));
+ sta->plink_timeout = sta->plink_timeout +
+ rand % sta->plink_timeout;
+ ++sta->plink_retries;
+ if (!mod_plink_timer(sta, sta->plink_timeout))
+ __sta_info_get(sta);
+ spin_unlock_bh(&sta->plink_lock);
+ mesh_plink_frame_tx(dev, PLINK_OPEN, sta->addr, llid,
+ 0, 0);
+ break;
+ }
+ reason = cpu_to_le16(MESH_MAX_RETRIES);
+ /* fall through on else */
+ case CNF_RCVD:
+ /* confirm timer */
+ if (!reason)
+ reason = cpu_to_le16(MESH_CONFIRM_TIMEOUT);
+ sta->plink_state = HOLDING;
+ if (!mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata)))
+ __sta_info_get(sta);
+ spin_unlock_bh(&sta->plink_lock);
+ mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid, plid,
+ reason);
+ break;
+ case HOLDING:
+ /* holding timer */
+ if (del_timer(&sta->plink_timer))
+ sta_info_put(sta);
+ mesh_plink_fsm_restart(sta);
+ spin_unlock_bh(&sta->plink_lock);
+ break;
+ default:
+ spin_unlock_bh(&sta->plink_lock);
+ break;
+ }
+
+ sta_info_put(sta);
+}
+
+static inline void mesh_plink_timer_set(struct sta_info *sta, int timeout)
+{
+ sta->plink_timer.expires = jiffies + (HZ * timeout / 1000);
+ sta->plink_timer.data = (unsigned long) sta;
+ sta->plink_timer.function = mesh_plink_timer;
+ sta->plink_timeout = timeout;
+ __sta_info_get(sta);
+ add_timer(&sta->plink_timer);
+}
+
+int mesh_plink_open(struct sta_info *sta)
+{
+ __le16 llid;
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev);
+#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
+ DECLARE_MAC_BUF(mac);
+#endif
+
+ spin_lock_bh(&sta->plink_lock);
+ get_random_bytes(&llid, 2);
+ sta->llid = llid;
+ if (sta->plink_state != LISTEN) {
+ spin_unlock_bh(&sta->plink_lock);
+ sta_info_put(sta);
+ return -EBUSY;
+ }
+ sta->plink_state = OPN_SNT;
+ mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
+ spin_unlock_bh(&sta->plink_lock);
+ mpl_dbg("Mesh plink: starting establishment with %s\n",
+ print_mac(mac, sta->addr));
+
+ return mesh_plink_frame_tx(sta->dev, PLINK_OPEN, sta->addr, llid, 0, 0);
+}
+
+void mesh_plink_block(struct sta_info *sta)
+{
+#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
+ DECLARE_MAC_BUF(mac);
+#endif
+
+ spin_lock_bh(&sta->plink_lock);
+ mesh_plink_deactivate(sta);
+ sta->plink_state = BLOCKED;
+ spin_unlock_bh(&sta->plink_lock);
+}
+
+int mesh_plink_close(struct sta_info *sta)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev);
+ int llid, plid, reason;
+#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
+ DECLARE_MAC_BUF(mac);
+#endif
+
+ mpl_dbg("Mesh plink: closing link with %s\n",
+ print_mac(mac, sta->addr));
+ spin_lock_bh(&sta->plink_lock);
+ sta->reason = cpu_to_le16(MESH_LINK_CANCELLED);
+ reason = sta->reason;
+
+ if (sta->plink_state == LISTEN || sta->plink_state == BLOCKED) {
+ mesh_plink_fsm_restart(sta);
+ spin_unlock_bh(&sta->plink_lock);
+ sta_info_put(sta);
+ return 0;
+ } else if (sta->plink_state == ESTAB) {
+ mesh_plink_deactivate(sta);
+ /* The timer should not be running */
+ if (!mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata)))
+ __sta_info_get(sta);
+ } else if (!mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata)))
+ sta->ignore_plink_timer = true;
+
+ sta->plink_state = HOLDING;
+ llid = sta->llid;
+ plid = sta->plid;
+ spin_unlock_bh(&sta->plink_lock);
+ mesh_plink_frame_tx(sta->dev, PLINK_CLOSE, sta->addr, llid, plid,
+ reason);
+ return 0;
+}
+
+void mesh_rx_plink_frame(struct net_device *dev, struct ieee80211_mgmt *mgmt,
+ size_t len, struct ieee80211_rx_status *rx_status)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee802_11_elems elems;
+ struct sta_info *sta;
+ enum plink_event event;
+ enum plink_frame_type ftype;
+ size_t baselen;
+ u8 ie_len;
+ u8 *baseaddr;
+ __le16 plid, llid, reason;
+#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
+ DECLARE_MAC_BUF(mac);
+#endif
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+ if (is_multicast_ether_addr(mgmt->da)) {
+ mpl_dbg("Mesh plink: ignore frame from multicast address");
+ return;
+ }
+
+ baseaddr = mgmt->u.action.u.plink_action.variable;
+ baselen = (u8 *) mgmt->u.action.u.plink_action.variable - (u8 *) mgmt;
+ if (mgmt->u.action.u.plink_action.action_code == PLINK_CONFIRM) {
+ baseaddr += 4;
+ baselen -= 4;
+ }
+ ieee802_11_parse_elems(baseaddr, len - baselen, &elems);
+ if (!elems.peer_link) {
+ mpl_dbg("Mesh plink: missing necessary peer link ie\n");
+ return;
+ }
+
+ ftype = *((u8 *)PLINK_GET_FRAME_SUBTYPE(elems.peer_link));
+ ie_len = elems.peer_link_len;
+ if ((ftype == PLINK_OPEN && ie_len != 3) ||
+ (ftype == PLINK_CONFIRM && ie_len != 5) ||
+ (ftype == PLINK_CLOSE && ie_len != 5 && ie_len != 7)) {
+ mpl_dbg("Mesh plink: incorrect plink ie length\n");
+ return;
+ }
+
+ if (ftype != PLINK_CLOSE && (!elems.mesh_id || !elems.mesh_config)) {
+ mpl_dbg("Mesh plink: missing necessary ie\n");
+ return;
+ }
+ /* Note the lines below are correct, the llid in the frame is the plid
+ * from the point of view of this host.
+ */
+ memcpy(&plid, PLINK_GET_LLID(elems.peer_link), 2);
+ if (ftype == PLINK_CONFIRM || (ftype == PLINK_CLOSE && ie_len == 7))
+ memcpy(&llid, PLINK_GET_PLID(elems.peer_link), 2);
+
+ sta = sta_info_get(local, mgmt->sa);
+ if (!sta && ftype != PLINK_OPEN) {
+ mpl_dbg("Mesh plink: cls or cnf from unknown peer\n");
+ return;
+ }
+
+ if (sta && sta->plink_state == BLOCKED) {
+ sta_info_put(sta);
+ return;
+ }
+
+ /* Now we will figure out the appropriate event... */
+ event = PLINK_UNDEFINED;
+ if (ftype != PLINK_CLOSE && (!mesh_matches_local(&elems, dev))) {
+ switch (ftype) {
+ case PLINK_OPEN:
+ event = OPN_RJCT;
+ break;
+ case PLINK_CONFIRM:
+ event = CNF_RJCT;
+ break;
+ case PLINK_CLOSE:
+ /* avoid warning */
+ break;
+ }
+ spin_lock_bh(&sta->plink_lock);
+ } else if (!sta) {
+ /* ftype == PLINK_OPEN */
+ u64 rates;
+ if (!mesh_plink_free_count(sdata)) {
+ mpl_dbg("Mesh plink error: no more free plinks\n");
+ return;
+ }
+
+ rates = ieee80211_sta_get_rates(local, &elems, rx_status->band);
+ sta = mesh_plink_add(mgmt->sa, rates, dev);
+ if (!sta) {
+ mpl_dbg("Mesh plink error: plink table full\n");
+ return;
+ }
+ event = OPN_ACPT;
+ spin_lock_bh(&sta->plink_lock);
+ } else {
+ spin_lock_bh(&sta->plink_lock);
+ switch (ftype) {
+ case PLINK_OPEN:
+ if (!mesh_plink_free_count(sdata) ||
+ (sta->plid && sta->plid != plid))
+ event = OPN_IGNR;
+ else
+ event = OPN_ACPT;
+ break;
+ case PLINK_CONFIRM:
+ if (!mesh_plink_free_count(sdata) ||
+ (sta->llid != llid || sta->plid != plid))
+ event = CNF_IGNR;
+ else
+ event = CNF_ACPT;
+ break;
+ case PLINK_CLOSE:
+ if (sta->plink_state == ESTAB)
+ /* Do not check for llid or plid. This does not
+ * follow the standard but since multiple plinks
+ * per sta are not supported, it is necessary in
+ * order to avoid a livelock when MP A sees an
+ * establish peer link to MP B but MP B does not
+ * see it. This can be caused by a timeout in
+ * B's peer link establishment or B beign
+ * restarted.
+ */
+ event = CLS_ACPT;
+ else if (sta->plid != plid)
+ event = CLS_IGNR;
+ else if (ie_len == 7 && sta->llid != llid)
+ event = CLS_IGNR;
+ else
+ event = CLS_ACPT;
+ break;
+ default:
+ mpl_dbg("Mesh plink: unknown frame subtype\n");
+ spin_unlock_bh(&sta->plink_lock);
+ sta_info_put(sta);
+ return;
+ }
+ }
+
+ mpl_dbg("Mesh plink (peer, state, llid, plid, event): %s %d %d %d %d\n",
+ print_mac(mac, mgmt->sa), sta->plink_state,
+ __le16_to_cpu(sta->llid), __le16_to_cpu(sta->plid),
+ event);
+ reason = 0;
+ switch (sta->plink_state) {
+ /* spin_unlock as soon as state is updated at each case */
+ case LISTEN:
+ switch (event) {
+ case CLS_ACPT:
+ mesh_plink_fsm_restart(sta);
+ spin_unlock_bh(&sta->plink_lock);
+ break;
+ case OPN_ACPT:
+ sta->plink_state = OPN_RCVD;
+ sta->plid = plid;
+ get_random_bytes(&llid, 2);
+ sta->llid = llid;
+ mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
+ spin_unlock_bh(&sta->plink_lock);
+ mesh_plink_frame_tx(dev, PLINK_OPEN, sta->addr, llid,
+ 0, 0);
+ mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr,
+ llid, plid, 0);
+ break;
+ default:
+ spin_unlock_bh(&sta->plink_lock);
+ break;
+ }
+ break;
+
+ case OPN_SNT:
+ switch (event) {
+ case OPN_RJCT:
+ case CNF_RJCT:
+ reason = cpu_to_le16(MESH_CAPABILITY_POLICY_VIOLATION);
+ case CLS_ACPT:
+ if (!reason)
+ reason = cpu_to_le16(MESH_CLOSE_RCVD);
+ sta->reason = reason;
+ sta->plink_state = HOLDING;
+ if (!mod_plink_timer(sta,
+ dot11MeshHoldingTimeout(sdata)))
+ sta->ignore_plink_timer = true;
+
+ llid = sta->llid;
+ spin_unlock_bh(&sta->plink_lock);
+ mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
+ plid, reason);
+ break;
+ case OPN_ACPT:
+ /* retry timer is left untouched */
+ sta->plink_state = OPN_RCVD;
+ sta->plid = plid;
+ llid = sta->llid;
+ spin_unlock_bh(&sta->plink_lock);
+ mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid,
+ plid, 0);
+ break;
+ case CNF_ACPT:
+ sta->plink_state = CNF_RCVD;
+ if (!mod_plink_timer(sta,
+ dot11MeshConfirmTimeout(sdata)))
+ sta->ignore_plink_timer = true;
+
+ spin_unlock_bh(&sta->plink_lock);
+ break;
+ default:
+ spin_unlock_bh(&sta->plink_lock);
+ break;
+ }
+ break;
+
+ case OPN_RCVD:
+ switch (event) {
+ case OPN_RJCT:
+ case CNF_RJCT:
+ reason = cpu_to_le16(MESH_CAPABILITY_POLICY_VIOLATION);
+ case CLS_ACPT:
+ if (!reason)
+ reason = cpu_to_le16(MESH_CLOSE_RCVD);
+ sta->reason = reason;
+ sta->plink_state = HOLDING;
+ if (!mod_plink_timer(sta,
+ dot11MeshHoldingTimeout(sdata)))
+ sta->ignore_plink_timer = true;
+
+ llid = sta->llid;
+ spin_unlock_bh(&sta->plink_lock);
+ mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
+ plid, reason);
+ break;
+ case OPN_ACPT:
+ llid = sta->llid;
+ spin_unlock_bh(&sta->plink_lock);
+ mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid,
+ plid, 0);
+ break;
+ case CNF_ACPT:
+ if (del_timer(&sta->plink_timer))
+ sta_info_put(sta);
+ sta->plink_state = ESTAB;
+ mesh_plink_inc_estab_count(sdata);
+ spin_unlock_bh(&sta->plink_lock);
+ mpl_dbg("Mesh plink with %s ESTABLISHED\n",
+ print_mac(mac, sta->addr));
+ break;
+ default:
+ spin_unlock_bh(&sta->plink_lock);
+ break;
+ }
+ break;
+
+ case CNF_RCVD:
+ switch (event) {
+ case OPN_RJCT:
+ case CNF_RJCT:
+ reason = cpu_to_le16(MESH_CAPABILITY_POLICY_VIOLATION);
+ case CLS_ACPT:
+ if (!reason)
+ reason = cpu_to_le16(MESH_CLOSE_RCVD);
+ sta->reason = reason;
+ sta->plink_state = HOLDING;
+ if (!mod_plink_timer(sta,
+ dot11MeshHoldingTimeout(sdata)))
+ sta->ignore_plink_timer = true;
+
+ llid = sta->llid;
+ spin_unlock_bh(&sta->plink_lock);
+ mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
+ plid, reason);
+ case OPN_ACPT:
+ if (del_timer(&sta->plink_timer))
+ sta_info_put(sta);
+ sta->plink_state = ESTAB;
+ mesh_plink_inc_estab_count(sdata);
+ spin_unlock_bh(&sta->plink_lock);
+ mpl_dbg("Mesh plink with %s ESTABLISHED\n",
+ print_mac(mac, sta->addr));
+ mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid,
+ plid, 0);
+ break;
+ default:
+ spin_unlock_bh(&sta->plink_lock);
+ break;
+ }
+ break;
+
+ case ESTAB:
+ switch (event) {
+ case CLS_ACPT:
+ reason = cpu_to_le16(MESH_CLOSE_RCVD);
+ sta->reason = reason;
+ mesh_plink_deactivate(sta);
+ sta->plink_state = HOLDING;
+ llid = sta->llid;
+ if (!mod_plink_timer(sta,
+ dot11MeshHoldingTimeout(sdata)))
+ __sta_info_get(sta);
+ spin_unlock_bh(&sta->plink_lock);
+ mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
+ plid, reason);
+ break;
+ case OPN_ACPT:
+ llid = sta->llid;
+ spin_unlock_bh(&sta->plink_lock);
+ mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid,
+ plid, 0);
+ break;
+ default:
+ spin_unlock_bh(&sta->plink_lock);
+ break;
+ }
+ break;
+ case HOLDING:
+ switch (event) {
+ case CLS_ACPT:
+ if (del_timer(&sta->plink_timer)) {
+ sta->ignore_plink_timer = 1;
+ sta_info_put(sta);
+ }
+ mesh_plink_fsm_restart(sta);
+ spin_unlock_bh(&sta->plink_lock);
+ break;
+ case OPN_ACPT:
+ case CNF_ACPT:
+ case OPN_RJCT:
+ case CNF_RJCT:
+ llid = sta->llid;
+ reason = sta->reason;
+ spin_unlock_bh(&sta->plink_lock);
+ mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid,
+ plid, reason);
+ break;
+ default:
+ spin_unlock_bh(&sta->plink_lock);
+ }
+ break;
+ default:
+ /* should not get here, BLOCKED is dealt with at the beggining
+ * of the function
+ */
+ spin_unlock_bh(&sta->plink_lock);
+ break;
+ }
+ sta_info_put(sta);
+}
--
1.5.2.5
-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
