The SDIO send and receive functions in bcmsdh.c are always called
with the same parameters. For the driver there is no use-case
to call them otherwise so remove those parameters from function
prototypes.
Reviewed-by: Franky Lin <frankyl@xxxxxxxxxxxx>
Reviewed-by: Hante Meuleman <meuleman@xxxxxxxxxxxx>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@xxxxxxxxxxxx>
Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx>
---
drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 73 +++++++++-----------
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 20 ++----
.../net/wireless/brcm80211/brcmfmac/sdio_host.h | 20 +++---
3 files changed, 46 insertions(+), 67 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 1249a60..5ff34e6 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -679,9 +679,7 @@ exit:
return ret;
}
-int
-brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
- uint flags, u8 *buf, uint nbytes)
+int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
{
struct sk_buff *mypkt;
int err;
@@ -693,7 +691,7 @@ brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
return -EIO;
}
- err = brcmf_sdiod_recv_pkt(sdiodev, addr, fn, flags, mypkt);
+ err = brcmf_sdiod_recv_pkt(sdiodev, mypkt);
if (!err)
memcpy(buf, mypkt->data, nbytes);
@@ -701,50 +699,47 @@ brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
return err;
}
-int
-brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
- uint flags, struct sk_buff *pkt)
+int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt)
{
- uint width;
+ u32 addr = sdiodev->sbwad;
int err = 0;
- brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
- fn, addr, pkt->len);
+ brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pkt->len);
- width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
- err = brcmf_sdiod_addrprep(sdiodev, width, &addr);
+ err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
if (err)
goto done;
- err = brcmf_sdiod_buffrw(sdiodev, fn, false, addr, pkt);
+ err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr, pkt);
done:
return err;
}
-int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
- uint flags, struct sk_buff_head *pktq, uint totlen)
+int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
+ struct sk_buff_head *pktq, uint totlen)
{
struct sk_buff *glom_skb;
struct sk_buff *skb;
- uint width;
+ u32 addr = sdiodev->sbwad;
int err = 0;
- brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
- fn, addr, pktq->qlen);
+ brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n",
+ addr, pktq->qlen);
- width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
- err = brcmf_sdiod_addrprep(sdiodev, width, &addr);
+ err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
if (err)
goto done;
if (pktq->qlen == 1)
- err = brcmf_sdiod_buffrw(sdiodev, fn, false, addr, pktq->next);
+ err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr,
+ pktq->next);
else if (!sdiodev->sg_support) {
glom_skb = brcmu_pkt_buf_get_skb(totlen);
if (!glom_skb)
return -ENOMEM;
- err = brcmf_sdiod_buffrw(sdiodev, fn, false, addr, glom_skb);
+ err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr,
+ glom_skb);
if (err)
goto done;
@@ -753,18 +748,17 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
skb_pull(glom_skb, skb->len);
}
} else
- err = brcmf_sdiod_sglist_rw(sdiodev, fn, false, addr, pktq);
+ err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, false, addr,
+ pktq);
done:
return err;
}
-int
-brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
- uint flags, u8 *buf, uint nbytes)
+int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
{
struct sk_buff *mypkt;
- uint width;
+ u32 addr = sdiodev->sbwad;
int err;
mypkt = brcmu_pkt_buf_get_skb(nbytes);
@@ -776,41 +770,40 @@ brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
memcpy(mypkt->data, buf, nbytes);
- width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
- err = brcmf_sdiod_addrprep(sdiodev, width, &addr);
+ err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
if (!err)
- err = brcmf_sdiod_buffrw(sdiodev, fn, true, addr, mypkt);
+ err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, true, addr,
+ mypkt);
brcmu_pkt_buf_free_skb(mypkt);
return err;
}
-int
-brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
- uint flags, struct sk_buff_head *pktq)
+int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
+ struct sk_buff_head *pktq)
{
struct sk_buff *skb;
- uint width;
+ u32 addr = sdiodev->sbwad;
int err;
- brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
- fn, addr, pktq->qlen);
+ brcmf_dbg(SDIO, "addr = 0x%x, size = %d\n", addr, pktq->qlen);
- width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
- err = brcmf_sdiod_addrprep(sdiodev, width, &addr);
+ err = brcmf_sdiod_addrprep(sdiodev, 4, &addr);
if (err)
return err;
if (pktq->qlen == 1 || !sdiodev->sg_support)
skb_queue_walk(pktq, skb) {
- err = brcmf_sdiod_buffrw(sdiodev, fn, true, addr, skb);
+ err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, true,
+ addr, skb);
if (err)
break;
}
else
- err = brcmf_sdiod_sglist_rw(sdiodev, fn, true, addr, pktq);
+ err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, true, addr,
+ pktq);
return err;
}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 3d8a1a8..7fff4cc 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -1419,8 +1419,6 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
*/
sdio_claim_host(bus->sdiodev->func[1]);
errcode = brcmf_sdiod_recv_chain(bus->sdiodev,
- bus->sdiodev->sbwad,
- SDIO_FUNC_2, F2SYNC,
&bus->glom, dlen);
sdio_release_host(bus->sdiodev->func[1]);
bus->sdcnt.f2rxdata++;
@@ -1615,8 +1613,7 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
}
/* Read remain of frame body */
- sdret = brcmf_sdiod_recv_buf(bus->sdiodev, bus->sdiodev->sbwad,
- SDIO_FUNC_2, F2SYNC, rbuf, rdlen);
+ sdret = brcmf_sdiod_recv_buf(bus->sdiodev, rbuf, rdlen);
bus->sdcnt.f2rxdata++;
/* Control frame failures need retransmission */
@@ -1702,8 +1699,6 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
sdio_claim_host(bus->sdiodev->func[1]);
if (!rd->len) {
ret = brcmf_sdiod_recv_buf(bus->sdiodev,
- bus->sdiodev->sbwad,
- SDIO_FUNC_2, F2SYNC,
bus->rxhdr, BRCMF_FIRSTREAD);
bus->sdcnt.f2rxhdrs++;
if (ret < 0) {
@@ -1760,8 +1755,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
skb_pull(pkt, head_read);
pkt_align(pkt, rd->len_left, bus->head_align);
- ret = brcmf_sdiod_recv_pkt(bus->sdiodev, bus->sdiodev->sbwad,
- SDIO_FUNC_2, F2SYNC, pkt);
+ ret = brcmf_sdiod_recv_pkt(bus->sdiodev, pkt);
bus->sdcnt.f2rxdata++;
sdio_release_host(bus->sdiodev->func[1]);
@@ -2116,8 +2110,7 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
goto done;
sdio_claim_host(bus->sdiodev->func[1]);
- ret = brcmf_sdiod_send_pkt(bus->sdiodev, bus->sdiodev->sbwad,
- SDIO_FUNC_2, F2SYNC, pktq);
+ ret = brcmf_sdiod_send_pkt(bus->sdiodev, pktq);
bus->sdcnt.f2txdata++;
if (ret < 0) {
@@ -2481,9 +2474,7 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
int i;
sdio_claim_host(bus->sdiodev->func[1]);
- err = brcmf_sdiod_send_buf(bus->sdiodev, bus->sdiodev->sbwad,
- SDIO_FUNC_2, F2SYNC,
- bus->ctrl_frame_buf,
+ err = brcmf_sdiod_send_buf(bus->sdiodev, bus->ctrl_frame_buf,
(u32)bus->ctrl_frame_len);
if (err < 0) {
@@ -2700,8 +2691,7 @@ static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len)
int ret;
bus->ctrl_frame_stat = false;
- ret = brcmf_sdiod_send_buf(bus->sdiodev, bus->sdiodev->sbwad,
- SDIO_FUNC_2, F2SYNC, frame, len);
+ ret = brcmf_sdiod_send_buf(bus->sdiodev, frame, len);
if (ret < 0) {
/* On failure, abort the command and terminate the frame */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index 4d71eb0..4c70cf2 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -197,7 +197,6 @@ void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
/* Buffer transfer to/from device (client) core via cmd53.
* fn: function number
- * addr: backplane address (i.e. >= regsva from attach)
* flags: backplane width, address increment, sync/async
* buf: pointer to memory data buffer
* nbytes: number of bytes to transfer to/from buf
@@ -207,17 +206,14 @@ void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
* Returns 0 or error code.
* NOTE: Async operation is not currently supported.
*/
-int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
- uint flags, struct sk_buff_head *pktq);
-int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
- uint flags, u8 *buf, uint nbytes);
-
-int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
- uint flags, struct sk_buff *pkt);
-int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
- uint flags, u8 *buf, uint nbytes);
-int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
- uint flags, struct sk_buff_head *pktq, uint totlen);
+int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
+ struct sk_buff_head *pktq);
+int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes);
+
+int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt);
+int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes);
+int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
+ struct sk_buff_head *pktq, uint totlen);
/* Flags bits */
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
