Hello! I am trying to implement software-crypt for ath10k so that it can do crypt with multiple stations connected to same AP. I tried using ath9k's approach and just not setting keys, but that does not work at all (no stations can communicate). If I basically leave code as is, then secondary stations can associate but never get DHCP. I see FCS and hw-crypt errored packets being received from the ath10k firmware/chip. This is probably because the chip/firmware decodes the secondary station's packets with the first station's keys. Transmitted packets (as sniffed from the AP) do appear fine. I was thinking to just take all fcs and/or crypt-errored packets in the receive path and somehow send them up the stack for the software-crypt layer to (re)decrypt. I think I have managed to get ath10k to send them up, but still DHCP does not complete. Does anyone have any suggestions for things to try or code to look at in detail? Thanks, Ben -- Ben Greear <greearb@xxxxxxxxxxxxxxx> Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
