Add VHT MCS/NSS set support for nl80211_set_tx_bitrate_mask().
This should be used mainly for test purpose, to check
different MCS/NSS VHT combinations.
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@xxxxxxxxx>
---
include/net/cfg80211.h | 1 +
include/uapi/linux/nl80211.h | 12 ++++++
net/wireless/nl80211.c | 92 +++++++++++++++++++++++++++++++++++++++---
3 files changed, 99 insertions(+), 6 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 626087b..d5bb243 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1764,6 +1764,7 @@ struct cfg80211_bitrate_mask {
struct {
u32 legacy;
u8 ht_mcs[IEEE80211_HT_MCS_MASK_LEN];
+ u16 vht_mcs[NL80211_VHT_NSS_MAX];
} control[IEEE80211_NUM_BANDS];
};
/**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 59d65e3..63c39bd 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -3060,6 +3060,8 @@ enum nl80211_key_attributes {
* %NL80211_MAX_SUPP_RATES in a single array).
* @NL80211_TXRATE_HT: HT (MCS) rates allowed for TX rate selection
* in an array of MCS numbers.
+ * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,
+ * see &struct nl80211_txrate_vht
* @__NL80211_TXRATE_AFTER_LAST: internal
* @NL80211_TXRATE_MAX: highest TX rate attribute
*/
@@ -3067,6 +3069,7 @@ enum nl80211_tx_rate_attributes {
__NL80211_TXRATE_INVALID,
NL80211_TXRATE_LEGACY,
NL80211_TXRATE_HT,
+ NL80211_TXRATE_VHT,
/* keep last */
__NL80211_TXRATE_AFTER_LAST,
@@ -3074,6 +3077,15 @@ enum nl80211_tx_rate_attributes {
};
#define NL80211_TXRATE_MCS NL80211_TXRATE_HT
+#define NL80211_VHT_NSS_MAX 8
+
+/**
+ * struct nl80211_txrate_vht - VHT MCS/NSS txrate bitmap
+ * @mcs: MCS bitmap table for each NSS
+ */
+struct nl80211_txrate_vht {
+ __u16 mcs[NL80211_VHT_NSS_MAX];
+};
/**
* enum nl80211_band - Frequency band
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index cc43374..12d38c1 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -7293,11 +7293,72 @@ static bool ht_rateset_to_mask(struct ieee80211_supported_band *sband,
return true;
}
+static u16 vht_mcs_map_to_mcs_mask(u8 vht_mcs_map)
+{
+ u16 mcs_mask = 0;
+
+ switch (vht_mcs_map) {
+ case IEEE80211_VHT_MCS_NOT_SUPPORTED:
+ break;
+ case IEEE80211_VHT_MCS_SUPPORT_0_7:
+ mcs_mask = 0x00FF;
+ break;
+ case IEEE80211_VHT_MCS_SUPPORT_0_8:
+ mcs_mask = 0x01FF;
+ break;
+ case IEEE80211_VHT_MCS_SUPPORT_0_9:
+ mcs_mask = 0x03FF;
+ break;
+ default:
+ break;
+ }
+
+ return mcs_mask;
+}
+
+static void vht_build_mcs_mask(u16 vht_mcs_map,
+ u16 vht_mcs_mask[NL80211_VHT_NSS_MAX])
+{
+ u8 nss;
+
+ for (nss = 0; nss < NL80211_VHT_NSS_MAX; nss++) {
+ vht_mcs_mask[nss] = vht_mcs_map_to_mcs_mask(vht_mcs_map & 0x03);
+ vht_mcs_map >>= 2;
+ }
+}
+
+static bool vht_set_mcs_mask(struct ieee80211_supported_band *sband,
+ struct nl80211_txrate_vht *txrate,
+ u16 mcs[NL80211_VHT_NSS_MAX])
+{
+ u16 tx_mcs_map = le16_to_cpu(sband->vht_cap.vht_mcs.tx_mcs_map);
+ u16 tx_mcs_mask[NL80211_VHT_NSS_MAX] = {};
+ u8 i;
+
+ if (!sband->vht_cap.vht_supported)
+ return false;
+
+ memset(mcs, 0, sizeof(mcs));
+
+ /* Build vht_mcs_mask from VHT capabilities */
+ vht_build_mcs_mask(tx_mcs_map, tx_mcs_mask);
+
+ for (i = 0; i < NL80211_VHT_NSS_MAX; i++) {
+ if ((tx_mcs_mask[i] & txrate->mcs[i]) == txrate->mcs[i])
+ mcs[i] = txrate->mcs[i];
+ else
+ return false;
+ }
+
+ return true;
+}
+
static const struct nla_policy nl80211_txattr_policy[NL80211_TXRATE_MAX + 1] = {
[NL80211_TXRATE_LEGACY] = { .type = NLA_BINARY,
.len = NL80211_MAX_SUPP_RATES },
[NL80211_TXRATE_HT] = { .type = NLA_BINARY,
.len = NL80211_MAX_SUPP_HT_RATES },
+ [NL80211_TXRATE_VHT] = { .len = sizeof(struct nl80211_txrate_vht)},
};
static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
@@ -7310,6 +7371,7 @@ static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
struct net_device *dev = info->user_ptr[1];
struct nlattr *tx_rates;
struct ieee80211_supported_band *sband;
+ u16 vht_tx_mcs_map;
if (!rdev->ops->set_bitrate_mask)
return -EOPNOTSUPP;
@@ -7326,6 +7388,12 @@ static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
memcpy(mask.control[i].ht_mcs,
sband->ht_cap.mcs.rx_mask,
sizeof(mask.control[i].ht_mcs));
+
+ if (!sband->vht_cap.vht_supported)
+ continue;
+
+ vht_tx_mcs_map = le16_to_cpu(sband->vht_cap.vht_mcs.tx_mcs_map);
+ vht_build_mcs_mask(vht_tx_mcs_map, mask.control[i].vht_mcs);
}
/* Back to default settings */
@@ -7364,20 +7432,32 @@ static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
mask.control[band].ht_mcs))
return -EINVAL;
}
+ if (tb[NL80211_TXRATE_VHT]) {
+ if (!vht_set_mcs_mask(
+ sband,
+ nla_data(tb[NL80211_TXRATE_VHT]),
+ mask.control[band].vht_mcs))
+ return -EINVAL;
+ }
if (mask.control[band].legacy == 0) {
- /* don't allow empty legacy rates if HT
- * is not even supported. */
- if (!rdev->wiphy.bands[band]->ht_cap.ht_supported)
+ /* don't allow empty legacy rates if HT or VHT
+ * are not even supported.
+ */
+ if (!(rdev->wiphy.bands[band]->ht_cap.ht_supported ||
+ rdev->wiphy.bands[band]->vht_cap.vht_supported))
return -EINVAL;
for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++)
if (mask.control[band].ht_mcs[i])
- break;
+ goto out;
+
+ for (i = 0; i < NL80211_VHT_NSS_MAX; i++)
+ if (mask.control[band].vht_mcs[i])
+ goto out;
/* legacy and mcs rates may not be both empty */
- if (i == IEEE80211_HT_MCS_MASK_LEN)
- return -EINVAL;
+ return -EINVAL;
}
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
