When not aggregating packets, fi->framelen should be passed in as length to calculate the duration. Before the tx path rework, ath_tx_fill_desc was called for either one aggregate, or one single frame, with the length of the packet or the aggregate as a parameter. After the rework, ath_tx_sched_aggr can pass a burst of single frames to ath_tx_fill_desc and sets len=0. Fix broken duration calculation by overriding the length in ath_tx_fill_desc before passing it to ath_buf_set_rate. Cc: stable@xxxxxxxxxxxxxxx Reported-by: Simon Wunderlich <sw@xxxxxxxxxxxxxxxxxx> Signed-off-by: Felix Fietkau <nbd@xxxxxxxxxxx> --- drivers/net/wireless/ath/ath9k/xmit.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 09cdbcd..b5a19e0 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1276,6 +1276,10 @@ static void ath_tx_fill_desc(struct ath_softc *sc, struct ath_buf *bf, if (!rts_thresh || (len > rts_thresh)) rts = true; } + + if (!aggr) + len = fi->framelen; + ath_buf_set_rate(sc, bf, &info, len, rts); } -- 1.8.3.4 (Apple Git-47) -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
