Search Linux Wireless

Re: Fwd: Intel 7260

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



iw dev wlan0 info
Interface wlan0
    ifindex 3
    type managed
    wiphy 0


iw dev wlan0 link
Connected to 06:27:22:51:ed:be (on wlan0)
    SSID: capa
    freq: 2412
    RX: 10337197 bytes (45941 packets)
    TX: 8685983 bytes (25169 packets)
    signal: -49 dBm
    tx bitrate: 54.0 MBit/s

    bss flags:    short-preamble short-slot-time
    dtim period:    0
    beacon int:    100

Matthew Emery
07988 197 438



On 26 November 2013 18:24, Dan Williams <dcbw@xxxxxxxxxx> wrote:
> On Tue, 2013-11-26 at 12:11 -0600, Pat Erley wrote:
>> On 11/26/2013 06:28 AM, matt emery wrote:
>> > Hi,
>> >
>> > I hope you can help, I am having problems getting N with new Dual band
>> > wireless ac 7260 pci express half mini card, manufacturer code
>> > 7260.HMWWB
>> >
>> > lspci: 03:00.0 Network controller: Intel Corporation Device 08b1 (rev 73)
>> >
>> > Kernel: 3.12.0-031200-generic
>> >
>> > firmware: -rw-r--r-- 1 root root 682892 Nov 26 12:10 iwlwifi-7260-7.ucode
>> > from here; http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=get&target=iwlwifi-7260-ucode-22.0.7.0.tgz
>> >
>> > wlan0     IEEE 802.11abg  ESSID:"XXXX"
>> >            Mode:Managed  Frequency:2.412 GHz  Access Point: 06:XX:22:XX:ED:XX
>> >            Bit Rate=54 Mb/s   Tx-Power=16 dBm
>> >            Retry  long limit:7   RTS thr:off   Fragment thr:off
>>
>> >            Encryption key:off
>>
>> While I'm not certain about your AP or the 7260 driver, I believe
>> 802.11n technically requires WPA2 encryption.  Try turning that on and
>> testing again.
>
> This is true, but also Matt is using 'iwconfig', which does not support
> anything N-related because it uses the older WEXT kernel API.  It simply
> won't show 802.11n bitrates, nor will it show encryption details for
> WPA.
>
> Matt should be using 'iw' instead, with:
>
> iw dev wlan0 info
> iw dev wlan0 link
>
> Dan
>
>> >            Power Management:off
>> >            Link Quality=70/70  Signal level=-36 dBm
>> >            Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
>> >            Tx excessive retries:1  Invalid misc:27   Missed beacon:0
>> >
>> >
>> > Let me know if you need anything else.
>> >
>> > Thanks
>> >
>> > matt
>> >
>> > Matthew Emery
>> > 07988 197 438
>> > --
>> > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
>> > the body of a message to majordomo@xxxxxxxxxxxxxxx
>> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> >
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux