[PATCH 6/8] ath10k: extract functions for legacy irq handling

[Michal Kazior <michal.kazior@xxxxxxxxx>]

Preparation for code re-use. Also use ioread/write
wrappers.

Signed-off-by: Michal Kazior <michal.kazior@xxxxxxxxx>
---
 drivers/net/wireless/ath/ath10k/pci.c | 68 +++++++++++++++++------------------
 1 file changed, 33 insertions(+), 35 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index fa1162e..a9bc290 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2096,6 +2096,34 @@ static bool ath10k_pci_irq_pending(struct ath10k *ar)
 	return false;
 }
 
+static void ath10k_pci_disable_and_clear_legacy_irq(struct ath10k *ar)
+{
+	/* IMPORTANT: INTR_CLR register has to be set after
+	 * INTR_ENABLE is set to 0, otherwise interrupt can not be
+	 * really cleared. */
+	ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_ENABLE_ADDRESS,
+			   0);
+	ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_CLR_ADDRESS,
+			   PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL);
+
+	/* IMPORTANT: this extra read transaction is required to
+	 * flush the posted write buffer. */
+	(void) ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
+				 PCIE_INTR_ENABLE_ADDRESS);
+}
+
+static void ath10k_pci_enable_legacy_irq(struct ath10k *ar)
+{
+	ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS +
+			   PCIE_INTR_ENABLE_ADDRESS,
+			   PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL);
+
+	/* IMPORTANT: this extra read transaction is required to
+	 * flush the posted write buffer. */
+	(void) ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
+				 PCIE_INTR_ENABLE_ADDRESS);
+}
+
 /*
  * Top-level interrupt handler for all PCI interrupts from a Target.
  * When a block of MSI interrupts is allocated, this top-level handler
@@ -2109,27 +2137,8 @@ static irqreturn_t ath10k_pci_interrupt_handler(int irq, void *arg)
 	if (!ath10k_pci_irq_pending(ar))
 		return IRQ_NONE;
 
-	if (ar_pci->num_msi_intrs == 0) {
-		/*
-		 * IMPORTANT: INTR_CLR regiser has to be set after
-		 * INTR_ENABLE is set to 0, otherwise interrupt can not be
-		 * really cleared.
-		 */
-		iowrite32(0, ar_pci->mem +
-			  (SOC_CORE_BASE_ADDRESS |
-			   PCIE_INTR_ENABLE_ADDRESS));
-		iowrite32(PCIE_INTR_FIRMWARE_MASK |
-			  PCIE_INTR_CE_MASK_ALL,
-			  ar_pci->mem + (SOC_CORE_BASE_ADDRESS |
-					 PCIE_INTR_CLR_ADDRESS));
-		/*
-		 * IMPORTANT: this extra read transaction is required to
-		 * flush the posted write buffer.
-		 */
-		(void) ioread32(ar_pci->mem +
-				(SOC_CORE_BASE_ADDRESS |
-				 PCIE_INTR_ENABLE_ADDRESS));
-	}
+	if (ar_pci->num_msi_intrs == 0)
+		ath10k_pci_disable_and_clear_legacy_irq(ar);
 
 	tasklet_schedule(&ar_pci->intr_tq);
 
@@ -2144,20 +2153,9 @@ static void ath10k_pci_tasklet(unsigned long data)
 	ath10k_pci_fw_interrupt_handler(ar); /* FIXME: Handle FW error */
 	ath10k_ce_per_engine_service_any(ar);
 
-	if (ar_pci->num_msi_intrs == 0) {
-		/* Enable Legacy PCI line interrupts */
-		iowrite32(PCIE_INTR_FIRMWARE_MASK |
-			  PCIE_INTR_CE_MASK_ALL,
-			  ar_pci->mem + (SOC_CORE_BASE_ADDRESS |
-					 PCIE_INTR_ENABLE_ADDRESS));
-		/*
-		 * IMPORTANT: this extra read transaction is required to
-		 * flush the posted write buffer
-		 */
-		(void) ioread32(ar_pci->mem +
-				(SOC_CORE_BASE_ADDRESS |
-				 PCIE_INTR_ENABLE_ADDRESS));
-	}
+	/* Re-enable legacy irq that was disabled in the irq handler */
+	if (ar_pci->num_msi_intrs == 0)
+		ath10k_pci_enable_legacy_irq(ar);
 }
 
 static int ath10k_pci_request_irq_msix(struct ath10k *ar)
-- 
1.8.4.rc3

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html