From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
Since IQ calibration is done as part of AGC calibration for
AR9485 and above, remove the seperate IQ calibration code.
Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index a18c3dd..aa01272 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1047,7 +1047,7 @@ static bool ar9003_hw_init_cal_pcoem(struct ath_hw *ah,
struct ath9k_hw_cal_data *caldata = ah->caldata;
bool txiqcal_done = false;
bool is_reusable = true, status = true;
- bool run_rtt_cal = false, run_agc_cal, sep_iq_cal = false;
+ bool run_rtt_cal = false, run_agc_cal;
bool rtt = !!(ah->caps.hw_caps & ATH9K_HW_CAP_RTT);
u32 rx_delay = 0;
u32 agc_ctrl = 0, agc_supp_cals = AR_PHY_AGC_CONTROL_OFFSET_CAL |
@@ -1119,22 +1119,12 @@ static bool ar9003_hw_init_cal_pcoem(struct ath_hw *ah,
REG_CLR_BIT(ah, AR_PHY_TX_IQCAL_CONTROL_0,
AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL);
txiqcal_done = run_agc_cal = true;
- } else if (caldata && !test_bit(TXIQCAL_DONE, &caldata->cal_flags)) {
- run_agc_cal = true;
- sep_iq_cal = true;
}
skip_tx_iqcal:
if (ath9k_hw_mci_is_enabled(ah) && IS_CHAN_2GHZ(chan) && run_agc_cal)
ar9003_mci_init_cal_req(ah, &is_reusable);
- if (sep_iq_cal) {
- txiqcal_done = ar9003_hw_tx_iq_cal_run(ah);
- REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
- udelay(5);
- REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
- }
-
if (REG_READ(ah, AR_PHY_CL_CAL_CTL) & AR_PHY_CL_CAL_ENABLE) {
rx_delay = REG_READ(ah, AR_PHY_RX_DELAY);
/* Disable BB_active */
--
1.8.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
