Search Linux Wireless

ath9k AR9382 high latency ping

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello All!

Here is another ath9k PCIe card I have problems with in a Intel Atom
N2600 embedded board (Advantech MIO-2261N). This is the same board I was
reporting problems with the AR9287 before. I exchanged the card for an
AR9382 and at least I can associate now.

It's a AR9382 (Unex DNXA-116) and the PCI ID 168c:0030 subsystem
168c:3116, reported as "AR9300 Rev:3"...

The symptom are ping times of around 1000ms, when connected to an AP
(very close, I expect around 2ms), eg.

64 bytes from 192.168.5.1: icmp_seq=1 ttl=64 time=1237 ms
64 bytes from 192.168.5.1: icmp_seq=2 ttl=64 time=1403 ms
64 bytes from 192.168.5.1: icmp_seq=3 ttl=64 time=1567 ms
64 bytes from 192.168.5.1: icmp_seq=4 ttl=64 time=1728 ms

The same card works fine in another Laptop, BTW, so it must be a problem
specific to this board.

I run wireless-testing from yesterday and I tried with different
combinations of enabling/disabling ASPM in the BIOS and booting with
pcie_aspm=off pcie_aspm=force all of which has the same result...

Below is some suspicious output of debug=0x8f49, I can send the full log
if you are interested. Please let me know if you have any idea what else
I can try...

[   45.583338] ath: phy0: unsupported hw bitrate detected 0x1b using 1 Mbit
[   91.109005] ath: phy1: NF did not complete in calibration window
...
[   91.304711] ath: phy1: MAC Hang signature not found at DCU complete
...
[   96.877586] ath: phy1: tx hung, resetting the chip
...
[  101.595052] ath: phy1: MAC Hang signature not found at DCU complete
[  101.595100] ath: phy1: Possible baseband hang, busy=11 (try 1)
[  101.894912] ath: phy1: MAC Hang signature not found at DCU complete
[  101.894960] ath: phy1: Possible baseband hang, busy=4 (try 1)
[  102.194815] ath: phy1: MAC Hang signature not found at DCU complete
[  102.194862] ath: phy1: Possible baseband hang, busy=4 (try 1)
...
[  104.316427] ath: phy1: MAC Hang signature not found at DCU complete
[  104.316455] ath: phy1: Possible baseband hang, busy=0 (try 1)
[  104.316468] ath: phy1: tx hung, resetting the chip

Thanks,
bruno

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux