From: Johannes Berg <johannes.berg@xxxxxxxxx>
Add support for vendor-specific commands to nl80211. This is
intended to be used for really vendor-specific functionality
that can't be implemented in a generic fashion for any reason.
It's *NOT* intended to be used for any normal/generic feature
or any optimisations that could be implemented across drivers.
Currently, only vendor commands (with replies) are supported,
no dump operations or vendor-specific notifications.
Also add a function wdev_to_ieee80211_vif() to mac80211 which
is needed for mac80211-based drivers wanting to implement any
vendor commands.
Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
---
include/net/cfg80211.h | 116 ++++++++++++++++++++-
include/net/mac80211.h | 13 +++
include/uapi/linux/nl80211.h | 41 ++++++++
net/mac80211/util.c | 11 ++
net/wireless/core.h | 4 +-
net/wireless/nl80211.c | 239 +++++++++++++++++++++++++++++++------------
6 files changed, 350 insertions(+), 74 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 817d813..68f3c19 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2654,6 +2654,34 @@ struct wiphy_coalesce_support {
};
/**
+ * enum wiphy_vendor_command_flags - validation flags for vendor commands
+ * @WIPHY_VENDOR_CMD_NEED_WDEV: vendor command requires wdev
+ * @WIPHY_VENDOR_CMD_NEED_NETDEV: vendor command requires netdev
+ * @WIPHY_VENDOR_CMD_NEED_RUNNING: interface/wdev must be up & running
+ * (must be combined with %_WDEV or %_NETDEV)
+ */
+enum wiphy_vendor_command_flags {
+ WIPHY_VENDOR_CMD_NEED_WDEV = BIT(0),
+ WIPHY_VENDOR_CMD_NEED_NETDEV = BIT(1),
+ WIPHY_VENDOR_CMD_NEED_RUNNING = BIT(2),
+};
+
+/**
+ * struct wiphy_vendor_command - vendor command definition
+ * @info: vendor command identifying information, as used in nl80211
+ * @flags: flags, see &enum wiphy_vendor_command_flags
+ * @doit: callback for the operation, note that wdev is %NULL if the
+ * flags didn't ask for a wdev and non-%NULL otherwise; the data
+ * pointer may be %NULL if userspace provided no data at all
+ */
+struct wiphy_vendor_command {
+ struct nl80211_vendor_cmd_info info;
+ u32 flags;
+ int (*doit)(struct wiphy *wiphy, struct wireless_dev *wdev,
+ const void *data, int data_len);
+};
+
+/**
* struct wiphy - wireless hardware description
* @reg_notifier: the driver's regulatory notification callback,
* note that if your driver uses wiphy_apply_custom_regulatory()
@@ -2766,6 +2794,9 @@ struct wiphy_coalesce_support {
* @extended_capabilities_mask: mask of the valid values
* @extended_capabilities_len: length of the extended capabilities
* @coalesce: packet coalescing support information
+ *
+ * @vendor_commands: array of vendor commands supported by the hardware
+ * @n_vendor_commands: number of vendor commands
*/
struct wiphy {
/* assign these fields before you register the wiphy */
@@ -2877,6 +2908,9 @@ struct wiphy {
const struct wiphy_coalesce_support *coalesce;
+ const struct wiphy_vendor_command *vendor_commands;
+ int n_vendor_commands;
+
char priv[0] __aligned(NETDEV_ALIGN);
};
@@ -3821,6 +3855,75 @@ void wiphy_rfkill_start_polling(struct wiphy *wiphy);
*/
void wiphy_rfkill_stop_polling(struct wiphy *wiphy);
+/**
+ * DOC: Vendor commands
+ *
+ * Occasionally, there are special protocol or firmware features that
+ * can't be implemented very openly. For this and similar cases, the
+ * vendor command functionality allows implementing the features with
+ * (typically closed-source) userspace and firmware, using nl80211 as
+ * the configuration mechanism.
+ *
+ * A driver supporting vendor commands must register them as an array
+ * in struct wiphy, with handlers for each one, each command has an
+ * OUI and sub command ID to identify it.
+ *
+ * Note that this feature should not be (ab)used to implement protocol
+ * features that could openly be shared across drivers. In particular,
+ * it must never be required to use vendor commands to implement any
+ * "normal" functionality that higher-level userspace like connection
+ * managers etc. need.
+ */
+
+struct sk_buff *__cfg80211_alloc_reply_skb(struct wiphy *wiphy,
+ enum nl80211_commands cmd,
+ enum nl80211_attrs attr,
+ int approxlen);
+
+/**
+ * cfg80211_vendor_cmd_alloc_reply_skb - allocate vendor command reply
+ * @wiphy: the wiphy
+ * @approxlen: an upper bound of the length of the data that will
+ * be put into the skb
+ *
+ * This function allocates and pre-fills an skb for a reply to
+ * a vendor command. Since it is intended for a reply, calling
+ * it outside of a vendor command's doit() operation is invalid.
+ *
+ * The returned skb is pre-filled with some identifying data in
+ * a way that any data that is put into the skb (with skb_put(),
+ * nla_put() or similar) will end up being within the
+ * %NL80211_ATTR_VENDOR_DATA attribute, so all that needs to be done
+ * with the skb is adding data for the corresponding userspace tool
+ * which can then read that data out of the testdata attribute. You
+ * must not modify the skb in any other way.
+ *
+ * When done, call cfg80211_vendor_cmd_reply() with the skb and return
+ * its error code as the result of the doit() operation.
+ *
+ * Return: An allocated and pre-filled skb. %NULL if any errors happen.
+ */
+static inline struct sk_buff *
+cfg80211_vendor_cmd_alloc_reply_skb(struct wiphy *wiphy, int approxlen)
+{
+ return __cfg80211_alloc_reply_skb(wiphy, NL80211_CMD_VENDOR,
+ NL80211_ATTR_VENDOR_DATA, approxlen);
+}
+
+/**
+ * cfg80211_vendor_cmd_reply - send the reply skb
+ * @skb: The skb, must have been allocated with
+ * cfg80211_vendor_cmd_alloc_reply_skb()
+ *
+ * Since calling this function will usually be the last thing
+ * before returning from the vendor command doit() you should
+ * return the error code. Note that this function consumes the
+ * skb regardless of the return value.
+ *
+ * Return: An error code or 0 on success.
+ */
+int cfg80211_vendor_cmd_reply(struct sk_buff *skb);
+
#ifdef CONFIG_NL80211_TESTMODE
/**
* DOC: Test mode
@@ -3856,8 +3959,12 @@ void wiphy_rfkill_stop_polling(struct wiphy *wiphy);
*
* Return: An allocated and pre-filled skb. %NULL if any errors happen.
*/
-struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy,
- int approxlen);
+static inline struct sk_buff *
+cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy, int approxlen)
+{
+ return __cfg80211_alloc_reply_skb(wiphy, NL80211_CMD_TESTMODE,
+ NL80211_ATTR_TESTDATA, approxlen);
+}
/**
* cfg80211_testmode_reply - send the reply skb
@@ -3871,7 +3978,10 @@ struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy,
*
* Return: An error code or 0 on success.
*/
-int cfg80211_testmode_reply(struct sk_buff *skb);
+static inline int cfg80211_testmode_reply(struct sk_buff *skb)
+{
+ return cfg80211_vendor_cmd_reply(skb);
+}
/**
* cfg80211_testmode_alloc_event_skb - allocate testmode event
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index cca02b2..320e3a2 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1159,6 +1159,19 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
}
/**
+ * wdev_to_ieee80211_vif - return a vif struct from a wdev
+ * @wdev: the wdev to get the vif for
+ *
+ * This can be used by mac80211 drivers with direct cfg80211 APIs
+ * (like the vendor commands) that get a wdev.
+ *
+ * Note that this function may return %NULL if the given wdev isn't
+ * associated with a vif that the driver knows about (e.g. monitor
+ * or AP_VLAN interfaces.)
+ */
+struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev);
+
+/**
* enum ieee80211_key_flags - key flags
*
* These flags are used for communication about keys between the driver
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 7e25164..ef30f0b 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -693,6 +693,15 @@
* other station that transmission must be blocked until the channel
* switch is complete.
*
+ * @NL80211_CMD_VENDOR: Vendor-specified command/event. The command is specified
+ * by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in
+ * %NL80211_ATTR_VENDOR_SUBCMD. Parameter(s) can be transported in
+ * %NL80211_ATTR_VENDOR_DATA.
+ * For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is
+ * used in the wiphy data as a nested attribute containing descriptions
+ * (&struct nl80211_vendor_cmd_info) of the supported vendor commands.
+ * This may also be sent as an event with the same attributes.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -860,6 +869,8 @@ enum nl80211_commands {
NL80211_CMD_CHANNEL_SWITCH,
+ NL80211_CMD_VENDOR,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1515,6 +1526,12 @@ enum nl80211_commands {
* to react to radar events, e.g. initiate a channel switch or leave the
* IBSS network.
*
+ * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if
+ * %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet)
+ * @NL80211_ATTR_VENDOR_SUBCMD: vendor sub-command
+ * @NL80211_ATTR_VENDOR_DATA: data for the vendor command, if any; this
+ * attribute is also used for vendor command feature advertisement
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1831,6 +1848,10 @@ enum nl80211_attrs {
NL80211_ATTR_HANDLE_DFS,
+ NL80211_ATTR_VENDOR_ID,
+ NL80211_ATTR_VENDOR_SUBCMD,
+ NL80211_ATTR_VENDOR_DATA,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -3951,4 +3972,24 @@ enum nl80211_rxmgmt_flags {
NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0,
};
+/*
+ * If this flag is unset, the lower 24 bits are an OUI, if set
+ * a Linux nl80211 vendor ID is used (no such IDs are allocated
+ * yet, so that's not valid so far)
+ */
+#define NL80211_VENDOR_ID_IS_LINUX 0x80000000
+
+/**
+ * struct nl80211_vendor_cmd_info - vendor command data
+ * @vendor_id: If the %NL80211_VENDOR_ID_IS_LINUX flag is clear, then the
+ * value is a 24-bit OUI; if it is set then a separately allocated ID
+ * may be used, but no such IDs are allocated yet. New IDs should be
+ * added to this file when needed.
+ * @subcmd: sub-command ID for the command
+ */
+struct nl80211_vendor_cmd_info {
+ __u32 vendor_id;
+ __u32 subcmd;
+};
+
#endif /* __LINUX_NL80211_H */
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 679e9d7..cbd584c 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -642,6 +642,17 @@ void ieee80211_iterate_active_interfaces_rtnl(
}
EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces_rtnl);
+struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
+
+ if (!ieee80211_sdata_running(sdata) ||
+ !(sdata->flags & IEEE80211_SDATA_IN_DRIVER))
+ return NULL;
+ return &sdata->vif;
+}
+EXPORT_SYMBOL_GPL(wdev_to_ieee80211_vif);
+
/*
* Nothing should have been stuffed into the workqueue during
* the suspend->resume cycle. If this WARN is seen then there
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 5390aeb..1b46a64 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -67,9 +67,7 @@ struct cfg80211_registered_device {
struct work_struct scan_done_wk;
struct work_struct sched_scan_results_wk;
-#ifdef CONFIG_NL80211_TESTMODE
- struct genl_info *testmode_info;
-#endif
+ struct genl_info *cur_cmd_info;
struct work_struct conn_work;
struct work_struct event_work;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 3f8c364..371ce38 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -357,6 +357,9 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
[NL80211_ATTR_STA_SUPPORTED_CHANNELS] = { .type = NLA_BINARY },
[NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES] = { .type = NLA_BINARY },
[NL80211_ATTR_HANDLE_DFS] = { .type = NLA_FLAG },
+ [NL80211_ATTR_VENDOR_ID] = { .type = NLA_U32 },
+ [NL80211_ATTR_VENDOR_SUBCMD] = { .type = NLA_U32 },
+ [NL80211_ATTR_VENDOR_DATA] = { .type = NLA_BINARY },
};
/* policy for the key attributes */
@@ -1154,6 +1157,7 @@ struct nl80211_dump_wiphy_state {
s64 filter_wiphy;
long start;
long split_start, band_start, chan_start;
+ long vendor_start;
bool split;
};
@@ -1165,6 +1169,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *dev,
struct nlattr *nl_bands, *nl_band;
struct nlattr *nl_freqs, *nl_freq;
struct nlattr *nl_cmds;
+ struct nlattr *nl_vendor_cmds;
enum ieee80211_band band;
struct ieee80211_channel *chan;
int i;
@@ -1559,6 +1564,20 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *dev,
case 10:
if (nl80211_send_coalesce(msg, dev))
goto nla_put_failure;
+ state->split_start++;
+ break;
+ case 11:
+ nl_vendor_cmds = nla_nest_start(msg, NL80211_ATTR_VENDOR_DATA);
+ if (!nl_vendor_cmds)
+ goto nla_put_failure;
+
+ for (i = state->vendor_start;
+ i < dev->wiphy.n_vendor_commands; i++)
+ if (nla_put(msg, i + 1,
+ sizeof(struct nl80211_vendor_cmd_info),
+ &dev->wiphy.vendor_commands[i].info))
+ goto nla_put_failure;
+ nla_nest_end(msg, nl_vendor_cmds);
/* done */
state->split_start = 0;
@@ -6653,6 +6672,40 @@ static int nl80211_set_mcast_rate(struct sk_buff *skb, struct genl_info *info)
return err;
}
+static struct sk_buff *
+__cfg80211_alloc_vendor_skb(struct cfg80211_registered_device *rdev,
+ int approxlen, u32 portid, u32 seq,
+ enum nl80211_commands cmd,
+ enum nl80211_attrs attr, gfp_t gfp)
+{
+ struct sk_buff *skb;
+ void *hdr;
+ struct nlattr *data;
+
+ skb = nlmsg_new(approxlen + 100, gfp);
+ if (!skb)
+ return NULL;
+
+ hdr = nl80211hdr_put(skb, portid, seq, 0, cmd);
+ if (!hdr) {
+ kfree_skb(skb);
+ return NULL;
+ }
+
+ if (nla_put_u32(skb, NL80211_ATTR_WIPHY, rdev->wiphy_idx))
+ goto nla_put_failure;
+ data = nla_nest_start(skb, attr);
+
+ ((void **)skb->cb)[0] = rdev;
+ ((void **)skb->cb)[1] = hdr;
+ ((void **)skb->cb)[2] = data;
+
+ return skb;
+
+ nla_put_failure:
+ kfree_skb(skb);
+ return NULL;
+}
#ifdef CONFIG_NL80211_TESTMODE
static struct genl_multicast_group nl80211_testmode_mcgrp = {
@@ -6681,11 +6734,11 @@ static int nl80211_testmode_do(struct sk_buff *skb, struct genl_info *info)
if (!info->attrs[NL80211_ATTR_TESTDATA])
return -EINVAL;
- rdev->testmode_info = info;
+ rdev->cur_cmd_info = info;
err = rdev_testmode_cmd(rdev, wdev,
nla_data(info->attrs[NL80211_ATTR_TESTDATA]),
nla_len(info->attrs[NL80211_ATTR_TESTDATA]));
- rdev->testmode_info = NULL;
+ rdev->cur_cmd_info = NULL;
return err;
}
@@ -6785,77 +6838,14 @@ static int nl80211_testmode_dump(struct sk_buff *skb,
return err;
}
-static struct sk_buff *
-__cfg80211_testmode_alloc_skb(struct cfg80211_registered_device *rdev,
- int approxlen, u32 portid, u32 seq, gfp_t gfp)
-{
- struct sk_buff *skb;
- void *hdr;
- struct nlattr *data;
-
- skb = nlmsg_new(approxlen + 100, gfp);
- if (!skb)
- return NULL;
-
- hdr = nl80211hdr_put(skb, portid, seq, 0, NL80211_CMD_TESTMODE);
- if (!hdr) {
- kfree_skb(skb);
- return NULL;
- }
-
- if (nla_put_u32(skb, NL80211_ATTR_WIPHY, rdev->wiphy_idx))
- goto nla_put_failure;
- data = nla_nest_start(skb, NL80211_ATTR_TESTDATA);
-
- ((void **)skb->cb)[0] = rdev;
- ((void **)skb->cb)[1] = hdr;
- ((void **)skb->cb)[2] = data;
-
- return skb;
-
- nla_put_failure:
- kfree_skb(skb);
- return NULL;
-}
-
-struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy,
- int approxlen)
-{
- struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
-
- if (WARN_ON(!rdev->testmode_info))
- return NULL;
-
- return __cfg80211_testmode_alloc_skb(rdev, approxlen,
- rdev->testmode_info->snd_portid,
- rdev->testmode_info->snd_seq,
- GFP_KERNEL);
-}
-EXPORT_SYMBOL(cfg80211_testmode_alloc_reply_skb);
-
-int cfg80211_testmode_reply(struct sk_buff *skb)
-{
- struct cfg80211_registered_device *rdev = ((void **)skb->cb)[0];
- void *hdr = ((void **)skb->cb)[1];
- struct nlattr *data = ((void **)skb->cb)[2];
-
- if (WARN_ON(!rdev->testmode_info)) {
- kfree_skb(skb);
- return -EINVAL;
- }
-
- nla_nest_end(skb, data);
- genlmsg_end(skb, hdr);
- return genlmsg_reply(skb, rdev->testmode_info);
-}
-EXPORT_SYMBOL(cfg80211_testmode_reply);
-
struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy,
int approxlen, gfp_t gfp)
{
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
- return __cfg80211_testmode_alloc_skb(rdev, approxlen, 0, 0, gfp);
+ return __cfg80211_alloc_vendor_skb(rdev, approxlen, 0, 0,
+ NL80211_CMD_TESTMODE,
+ NL80211_ATTR_TESTDATA, gfp);
}
EXPORT_SYMBOL(cfg80211_testmode_alloc_event_skb);
@@ -8839,6 +8829,111 @@ static int nl80211_crit_protocol_stop(struct sk_buff *skb,
return 0;
}
+static int nl80211_vendor_cmd(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct wireless_dev *wdev =
+ __cfg80211_wdev_from_attrs(genl_info_net(info), info->attrs);
+ int i, err;
+ u32 vid, subcmd;
+
+ if (!rdev->wiphy.vendor_commands)
+ return -EOPNOTSUPP;
+
+ if (IS_ERR(wdev)) {
+ err = PTR_ERR(wdev);
+ if (err != -EINVAL)
+ return err;
+ wdev = NULL;
+ } else if (wdev->wiphy != &rdev->wiphy) {
+ return -EINVAL;
+ }
+
+ if (!info->attrs[NL80211_ATTR_VENDOR_ID] ||
+ !info->attrs[NL80211_ATTR_VENDOR_SUBCMD])
+ return -EINVAL;
+
+ vid = nla_get_u32(info->attrs[NL80211_ATTR_VENDOR_ID]);
+ subcmd = nla_get_u32(info->attrs[NL80211_ATTR_VENDOR_SUBCMD]);
+ for (i = 0; i < rdev->wiphy.n_vendor_commands; i++) {
+ const struct wiphy_vendor_command *vcmd;
+ void *data = NULL;
+ int len = 0;
+
+ vcmd = &rdev->wiphy.vendor_commands[i];
+
+ if (vcmd->info.vendor_id != vid || vcmd->info.subcmd != subcmd)
+ continue;
+
+ if (vcmd->flags & (WIPHY_VENDOR_CMD_NEED_WDEV |
+ WIPHY_VENDOR_CMD_NEED_NETDEV)) {
+ if (!wdev)
+ return -EINVAL;
+ if (vcmd->flags & WIPHY_VENDOR_CMD_NEED_NETDEV &&
+ !wdev->netdev)
+ return -EINVAL;
+
+ if (vcmd->flags & WIPHY_VENDOR_CMD_NEED_RUNNING) {
+ if (wdev->netdev &&
+ !netif_running(wdev->netdev))
+ return -ENETDOWN;
+ if (!wdev->netdev && !wdev->p2p_started)
+ return -ENETDOWN;
+ }
+ } else {
+ wdev = NULL;
+ }
+
+ if (info->attrs[NL80211_ATTR_VENDOR_DATA]) {
+ data = nla_data(info->attrs[NL80211_ATTR_VENDOR_DATA]);
+ len = nla_len(info->attrs[NL80211_ATTR_VENDOR_DATA]);
+ }
+
+ rdev->cur_cmd_info = info;
+ err = rdev->wiphy.vendor_commands[i].doit(&rdev->wiphy, wdev,
+ data, len);
+ rdev->cur_cmd_info = NULL;
+ return err;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+struct sk_buff *__cfg80211_alloc_reply_skb(struct wiphy *wiphy,
+ enum nl80211_commands cmd,
+ enum nl80211_attrs attr,
+ int approxlen)
+{
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+
+ if (WARN_ON(!rdev->cur_cmd_info))
+ return NULL;
+
+ return __cfg80211_alloc_vendor_skb(rdev, approxlen,
+ rdev->cur_cmd_info->snd_portid,
+ rdev->cur_cmd_info->snd_seq,
+ cmd, attr, GFP_KERNEL);
+}
+EXPORT_SYMBOL(__cfg80211_alloc_reply_skb);
+
+int cfg80211_vendor_cmd_reply(struct sk_buff *skb)
+{
+ struct cfg80211_registered_device *rdev = ((void **)skb->cb)[0];
+ void *hdr = ((void **)skb->cb)[1];
+ struct nlattr *data = ((void **)skb->cb)[2];
+
+ if (WARN_ON(!rdev->cur_cmd_info)) {
+ kfree_skb(skb);
+ return -EINVAL;
+ }
+
+ nla_nest_end(skb, data);
+ genlmsg_end(skb, hdr);
+ return genlmsg_reply(skb, rdev->cur_cmd_info);
+}
+EXPORT_SYMBOL_GPL(cfg80211_vendor_cmd_reply);
+
+
#define NL80211_FLAG_NEED_WIPHY 0x01
#define NL80211_FLAG_NEED_NETDEV 0x02
#define NL80211_FLAG_NEED_RTNL 0x04
@@ -9563,6 +9658,14 @@ static struct genl_ops nl80211_ops[] = {
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
+ {
+ .cmd = NL80211_CMD_VENDOR,
+ .doit = nl80211_vendor_cmd,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_WIPHY |
+ NL80211_FLAG_NEED_RTNL,
+ },
};
static struct genl_multicast_group nl80211_mlme_mcgrp = {
--
1.8.4.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
