On 11/12/2013 02:22 PM, Ben Greear wrote: > I think it must have something to do with the ath9k driver resetting > itself or maybe going to sleep when it notices no other stations are associated. If I add > a second station (in this case, I am roaming between two APs on the > same channel), then the roam time is reliably < 50ms, usually around 40ms. > > When I have a single station, I see kernel logs such as this > below (I added timestamps to logging messages). > > I'm dropping hostapd mailing from any further replies, as this does not > seem to be an issue with it's logic... Oh, my...found the problem. I had serial console logging on, and all those extra regulatory messages makes the difference :P Disabled serial console and now it roams in about 13-14ms :P /me slaps self in head with wet fish. Thanks, Ben -- Ben Greear <greearb@xxxxxxxxxxxxxxx> Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
