5/10 MHz requires to send the frequency information as chandef instead
of the the old channel type, therfore send the chandef next the channel
type (the latter is still used for old kernels).
Signed-off-by: Simon Wunderlich <sw@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@xxxxxxxxxxxxxxxxxxx>
---
Changes to PATCH:
* also send old channel type to keep compatibility for older kernels
---
ibss.c | 62 ++++++++++++++++++++++++++++++++++++++++++++++----------------
1 file changed, 46 insertions(+), 16 deletions(-)
diff --git a/ibss.c b/ibss.c
index 955446e..1bf1bab 100644
--- a/ibss.c
+++ b/ibss.c
@@ -30,16 +30,38 @@ static int join_ibss(struct nl80211_state *state,
float rate;
int bintval;
int i;
+ unsigned long freq;
static const struct {
const char *name;
- unsigned int val;
- } htmap[] = {
- { .name = "HT20", .val = NL80211_CHAN_HT20, },
- { .name = "HT40+", .val = NL80211_CHAN_HT40PLUS, },
- { .name = "HT40-", .val = NL80211_CHAN_HT40MINUS, },
- { .name = "NOHT", .val = NL80211_CHAN_NO_HT, },
+ unsigned int width;
+ int freq1_diff;
+ int chantype; /* for older kernel */
+ } *chanmode_selected = NULL, chanmode[] = {
+ { .name = "HT20",
+ .width = NL80211_CHAN_WIDTH_20,
+ .freq1_diff = 0,
+ .chantype = NL80211_CHAN_HT20 },
+ { .name = "HT40+",
+ .width = NL80211_CHAN_WIDTH_40,
+ .freq1_diff = 10,
+ .chantype = NL80211_CHAN_HT40PLUS },
+ { .name = "HT40-",
+ .width = NL80211_CHAN_WIDTH_40,
+ .freq1_diff = -10,
+ .chantype = NL80211_CHAN_HT40MINUS },
+ { .name = "NOHT",
+ .width = NL80211_CHAN_WIDTH_20_NOHT,
+ .freq1_diff = 0,
+ .chantype = NL80211_CHAN_NO_HT },
+ { .name = "5MHZ",
+ .width = NL80211_CHAN_WIDTH_5,
+ .freq1_diff = 0,
+ .chantype = -1 },
+ { .name = "10MHZ",
+ .width = NL80211_CHAN_WIDTH_10,
+ .freq1_diff = 0,
+ .chantype = -1 },
};
- unsigned int htval;
if (argc < 2)
return 1;
@@ -50,23 +72,31 @@ static int join_ibss(struct nl80211_state *state,
argc--;
/* freq */
- NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FREQ,
- strtoul(argv[0], &end, 10));
+ freq = strtoul(argv[0], &end, 10);
if (*end != '\0')
return 1;
+
+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FREQ, freq);
argv++;
argc--;
if (argc) {
- for (i = 0; i < ARRAY_SIZE(htmap); i++) {
- if (strcasecmp(htmap[i].name, argv[0]) == 0) {
- htval = htmap[i].val;
+ for (i = 0; i < ARRAY_SIZE(chanmode); i++) {
+ if (strcasecmp(chanmode[i].name, argv[0]) == 0) {
+ chanmode_selected = &chanmode[i];
break;
}
}
- if (i != ARRAY_SIZE(htmap)) {
- NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_CHANNEL_TYPE,
- htval);
+ if (chanmode_selected) {
+ NLA_PUT_U32(msg, NL80211_ATTR_CHANNEL_WIDTH,
+ chanmode_selected->width);
+ NLA_PUT_U32(msg, NL80211_ATTR_CENTER_FREQ1,
+ freq + chanmode_selected->freq1_diff);
+ if (chanmode_selected->chantype != -1)
+ NLA_PUT_U32(msg,
+ NL80211_ATTR_WIPHY_CHANNEL_TYPE,
+ chanmode_selected->chantype);
+
argv++;
argc--;
}
@@ -164,7 +194,7 @@ COMMAND(ibss, leave, NULL,
NL80211_CMD_LEAVE_IBSS, 0, CIB_NETDEV, leave_ibss,
"Leave the current IBSS cell.");
COMMAND(ibss, join,
- "<SSID> <freq in MHz> [HT20|HT40+|HT40-|NOHT] [fixed-freq] [<fixed bssid>] [beacon-interval <TU>]"
+ "<SSID> <freq in MHz> [HT20|HT40+|HT40-|NOHT|5MHZ|10MHZ] [fixed-freq] [<fixed bssid>] [beacon-interval <TU>]"
" [basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] "
"[key d:0:abcde]",
NL80211_CMD_JOIN_IBSS, 0, CIB_NETDEV, join_ibss,
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
