On Mon, Nov 11, 2013 at 10:41 AM, Johannes Berg
<johannes@xxxxxxxxxxxxxxxx> wrote:
> On Mon, 2013-11-11 at 10:23 -0600, Felipe Contreras wrote:
>> However, I noticed that once in a very long time, sometimes it does
>> receive the corrupted frame and the association continues, and the
>> driver code detects it's a corrupted beacon frame.
>
> So how does it treat the corruption?
wlan0: associating with AP with corrupt beacon
>> > The firmware still
>> > shouldn't be filtering anything since it doesn't really look at the
>> > beacon information (or maybe it filters based on the DS IE? I'm not
>> > entirely sure)
>>
>> That's what I thought, but I don't see it at all (only in monitor
>> mode, and in ad-hoc).
>
> Yes, that part is odd - that's really the root cause.
>
> I didn't quickly find in the threads what device and firmware you were
> using, mind identifying it (again)?
Intel Corporation Centrino Advanced-N 6235 (rev 24)
iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
>> Nope, it keeps trying forever.
>>
>> Oct 13 14:33:15 nysa kernel: wlan0: authenticate with e0:1d:3b:46:82:a0
>> Oct 13 14:33:15 nysa kernel: wlan0: send auth to e0:1d:3b:46:82:a0 (try 1/3)
>> Oct 13 14:33:15 nysa kernel: wlan0: authenticated
>> Oct 13 14:33:15 nysa kernel: wlan0: waiting for beacon from e0:1d:3b:46:82:a0
>> Oct 13 14:33:18 nysa kernel: wlan0: authenticate with e0:1d:3b:46:82:a0
>> Oct 13 14:33:18 nysa kernel: wlan0: send auth to e0:1d:3b:46:82:a0 (try 1/3)
>> Oct 13 14:33:18 nysa kernel: wlan0: authenticated
>> Oct 13 14:33:18 nysa kernel: wlan0: waiting for beacon from e0:1d:3b:46:82:a0
>> Oct 13 14:33:22 nysa kernel: wlan0: authenticate with e0:1d:3b:46:82:a0
>> Oct 13 14:33:22 nysa kernel: wlan0: send auth to e0:1d:3b:46:82:a0 (try 1/3)
>> Oct 13 14:33:22 nysa kernel: wlan0: authenticated
>> Oct 13 14:33:22 nysa kernel: wlan0: waiting for beacon from e0:1d:3b:46:82:a0
>> ...
>
> I see the same behaviour - but it's the supplicant's doing, it is indeed
> getting the event that the AP connection failed (timed out):
>
> wlan0: Event ASSOC_TIMED_OUT (15) received
Not in my setup.
>> > This isn't really true like I said above - the kernel can only drop the
>> > association, if userspace *insists* then it will try again and again.
>>
>> But it's not doing this:
>>
>> ieee80211_destroy_assoc_data(sdata, false);
>> cfg80211_assoc_timeout(sdata->dev, bss);
>>
>> Which is what causes the association to stop for me.
>>
>> So where exactly in the code is the association being "dropped"?
>
> This does get called in my setup.
Yes, because your setup is receiving beacons.
Check the code:
if ((ifmgd->assoc_data->need_beacon && !ifmgd->have_beacon) ||
ieee80211_do_assoc(sdata)) {
struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
ieee80211_destroy_assoc_data(sdata, false);
cfg80211_assoc_timeout(sdata->dev, bss);
}
If there's no beacon, cfg80211_assoc_timeout() is not called.
I'm sure if you don't call ieee80211_rx_mgmt_beacon() at all you will
see the same behavior I see.
>> I would rather fix the problem at the two levels, so even if the
>> firmware passes the corrupt frames correctly, the driver would still
>> somewhat work when there's no beacon frames at all.
>
> Like I said before - trying to work with an AP without beacons at all is
> really bad, we shouldn't be doing it.
Why not? For all intents and purposes my system is not receiving any
beacons, and I don't see any problems.
What would you prefer? That nothing works at all?
> We might not properly react to
> radar events, and other things, for example.
So? I don't know what that means, but it can't be worst than not being
able to connect to the Internet whatsoever at all.
Cheers.
--
Felipe Contreras
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
