What the function does is to actually wait for the
firmware indication bit to be set. Prerequisite
for this is having interrupts registered.
Signed-off-by: Michal Kazior <michal.kazior@xxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/pci.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index a001ff2..4aa7992 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -53,7 +53,7 @@ static int ath10k_pci_post_rx_pipe(struct ath10k_pci_pipe *pipe_info,
static void ath10k_pci_rx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info);
static void ath10k_pci_stop_ce(struct ath10k *ar);
static void ath10k_pci_device_reset(struct ath10k *ar);
-static int ath10k_pci_reset_target(struct ath10k *ar);
+static int ath10k_pci_wait_for_target_init(struct ath10k *ar);
static int ath10k_pci_start_intr(struct ath10k *ar);
static void ath10k_pci_stop_intr(struct ath10k *ar);
@@ -1857,7 +1857,7 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar)
*/
ath10k_pci_device_reset(ar);
- ret = ath10k_pci_reset_target(ar);
+ ret = ath10k_pci_wait_for_target_init(ar);
if (ret)
goto err_irq;
@@ -2257,7 +2257,7 @@ static void ath10k_pci_stop_intr(struct ath10k *ar)
pci_disable_msi(ar_pci->pdev);
}
-static int ath10k_pci_reset_target(struct ath10k *ar)
+static int ath10k_pci_wait_for_target_init(struct ath10k *ar)
{
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
int wait_limit = 300; /* 3 sec */
--
1.8.4.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
