From: Bob Copeland <me@xxxxxxxxxxxxxxx>
Rather than unlock at the end of each case, do it once after
all is said and done.
Signed-off-by: Bob Copeland <bob@xxxxxxxxxxx>
---
net/mac80211/mesh_plink.c | 29 +++--------------------------
1 file changed, 3 insertions(+), 26 deletions(-)
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index d45826e..c3a3faf 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -575,7 +575,6 @@ static void mesh_plink_timer(unsigned long data)
rand % sta->plink_timeout;
++sta->plink_retries;
mod_plink_timer(sta, sta->plink_timeout);
- spin_unlock_bh(&sta->lock);
action = WLAN_SP_MESH_PEERING_OPEN;
break;
}
@@ -587,19 +586,17 @@ static void mesh_plink_timer(unsigned long data)
reason = cpu_to_le16(WLAN_REASON_MESH_CONFIRM_TIMEOUT);
sta->plink_state = NL80211_PLINK_HOLDING;
mod_plink_timer(sta, mshcfg->dot11MeshHoldingTimeout);
- spin_unlock_bh(&sta->lock);
action = WLAN_SP_MESH_PEERING_CLOSE;
break;
case NL80211_PLINK_HOLDING:
/* holding timer */
del_timer(&sta->plink_timer);
mesh_plink_fsm_restart(sta);
- spin_unlock_bh(&sta->lock);
break;
default:
- spin_unlock_bh(&sta->lock);
break;
}
+ spin_unlock_bh(&sta->lock);
if (action)
mesh_plink_frame_tx(sdata, action, sta->sta.addr,
llid, plid, reason);
@@ -856,12 +853,10 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata,
reason = 0;
spin_lock_bh(&sta->lock);
switch (sta->plink_state) {
- /* spin_unlock as soon as state is updated at each case */
case NL80211_PLINK_LISTEN:
switch (event) {
case CLS_ACPT:
mesh_plink_fsm_restart(sta);
- spin_unlock_bh(&sta->lock);
break;
case OPN_ACPT:
sta->plink_state = NL80211_PLINK_OPN_RCVD;
@@ -874,11 +869,9 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata,
/* set the non-peer mode to active during peering */
changed |= ieee80211_mps_local_status_update(sdata);
- spin_unlock_bh(&sta->lock);
action = WLAN_SP_MESH_PEERING_OPEN;
break;
default:
- spin_unlock_bh(&sta->lock);
break;
}
break;
@@ -897,14 +890,12 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata,
mshcfg->dot11MeshHoldingTimeout))
sta->ignore_plink_timer = true;
- spin_unlock_bh(&sta->lock);
action = WLAN_SP_MESH_PEERING_CLOSE;
break;
case OPN_ACPT:
/* retry timer is left untouched */
sta->plink_state = NL80211_PLINK_OPN_RCVD;
sta->plid = plid;
- spin_unlock_bh(&sta->lock);
action = WLAN_SP_MESH_PEERING_CONFIRM;
break;
case CNF_ACPT:
@@ -913,10 +904,8 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata,
mshcfg->dot11MeshConfirmTimeout))
sta->ignore_plink_timer = true;
- spin_unlock_bh(&sta->lock);
break;
default:
- spin_unlock_bh(&sta->lock);
break;
}
break;
@@ -935,17 +924,14 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata,
mshcfg->dot11MeshHoldingTimeout))
sta->ignore_plink_timer = true;
- spin_unlock_bh(&sta->lock);
action = WLAN_SP_MESH_PEERING_CLOSE;
break;
case OPN_ACPT:
- spin_unlock_bh(&sta->lock);
action = WLAN_SP_MESH_PEERING_CONFIRM;
break;
case CNF_ACPT:
del_timer(&sta->plink_timer);
sta->plink_state = NL80211_PLINK_ESTAB;
- spin_unlock_bh(&sta->lock);
changed |= mesh_plink_inc_estab_count(sdata);
changed |= mesh_set_ht_prot_mode(sdata);
changed |= mesh_set_short_slot_time(sdata);
@@ -956,7 +942,6 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata,
mshcfg->power_mode);
break;
default:
- spin_unlock_bh(&sta->lock);
break;
}
break;
@@ -975,13 +960,11 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata,
mshcfg->dot11MeshHoldingTimeout))
sta->ignore_plink_timer = true;
- spin_unlock_bh(&sta->lock);
action = WLAN_SP_MESH_PEERING_CLOSE;
break;
case OPN_ACPT:
del_timer(&sta->plink_timer);
sta->plink_state = NL80211_PLINK_ESTAB;
- spin_unlock_bh(&sta->lock);
changed |= mesh_plink_inc_estab_count(sdata);
changed |= mesh_set_ht_prot_mode(sdata);
changed |= mesh_set_short_slot_time(sdata);
@@ -993,7 +976,6 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata,
mshcfg->power_mode);
break;
default:
- spin_unlock_bh(&sta->lock);
break;
}
break;
@@ -1006,17 +988,14 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata,
changed |= __mesh_plink_deactivate(sta);
sta->plink_state = NL80211_PLINK_HOLDING;
mod_plink_timer(sta, mshcfg->dot11MeshHoldingTimeout);
- spin_unlock_bh(&sta->lock);
changed |= mesh_set_ht_prot_mode(sdata);
changed |= mesh_set_short_slot_time(sdata);
action = WLAN_SP_MESH_PEERING_CLOSE;
break;
case OPN_ACPT:
- spin_unlock_bh(&sta->lock);
action = WLAN_SP_MESH_PEERING_CONFIRM;
break;
default:
- spin_unlock_bh(&sta->lock);
break;
}
break;
@@ -1026,26 +1005,24 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata,
if (del_timer(&sta->plink_timer))
sta->ignore_plink_timer = 1;
mesh_plink_fsm_restart(sta);
- spin_unlock_bh(&sta->lock);
break;
case OPN_ACPT:
case CNF_ACPT:
case OPN_RJCT:
case CNF_RJCT:
- spin_unlock_bh(&sta->lock);
action = WLAN_SP_MESH_PEERING_CLOSE;
break;
default:
- spin_unlock_bh(&sta->lock);
+ break;
}
break;
default:
/* should not get here, PLINK_BLOCKED is dealt with at the
* beginning of the function
*/
- spin_unlock_bh(&sta->lock);
break;
}
+ spin_unlock_bh(&sta->lock);
if (action) {
mesh_plink_frame_tx(sdata, action, sta->sta.addr,
sta->llid, sta->plid, sta->reason);
--
1.8.4.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
