Don't wildly pass any number for num_rates to rt2x00lib,
instead pass which type of rates are supported (CCK, OFDM).
Same for num_modes but then for the 2GHZ and 5GHZ band.
This makes the interface look much nicer and makes
extending it later easier.
Signed-off-by: Ivo van Doorn <IvDoorn@xxxxxxxxx>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 4 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 6 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 6 +-
drivers/net/wireless/rt2x00/rt2x00.h | 38 +++++++++------
drivers/net/wireless/rt2x00/rt2x00dev.c | 80 +++++++++++++++---------------
drivers/net/wireless/rt2x00/rt2x00lib.h | 5 +-
drivers/net/wireless/rt2x00/rt61pci.c | 6 +-
drivers/net/wireless/rt2x00/rt73usb.c | 8 ++--
8 files changed, 81 insertions(+), 72 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 23b14b0..b63bc66 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1348,8 +1348,8 @@ static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw_mode information.
*/
- spec->num_modes = 1;
- spec->num_rates = 4;
+ spec->supported_bands = SUPPORT_BAND_2GHZ;
+ spec->supported_rates = SUPPORT_RATE_CCK;
spec->tx_power_a = NULL;
spec->tx_power_bg = txpower;
spec->tx_power_default = DEFAULT_TXPOWER;
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 26e1fcc..add8aff 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1662,8 +1662,8 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw_mode information.
*/
- spec->num_modes = 2;
- spec->num_rates = 12;
+ spec->supported_bands = SUPPORT_BAND_2GHZ;
+ spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
spec->tx_power_a = NULL;
spec->tx_power_bg = txpower;
spec->tx_power_default = DEFAULT_TXPOWER;
@@ -1684,9 +1684,9 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
spec->channels = rf_vals_bg_2525e;
} else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_5222);
spec->channels = rf_vals_5222;
- spec->num_modes = 3;
}
}
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 27681fc..0a5900b 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1582,8 +1582,8 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw_mode information.
*/
- spec->num_modes = 2;
- spec->num_rates = 12;
+ spec->supported_bands = SUPPORT_BAND_2GHZ;
+ spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
spec->tx_power_a = NULL;
spec->tx_power_bg = txpower;
spec->tx_power_default = DEFAULT_TXPOWER;
@@ -1604,9 +1604,9 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
spec->channels = rf_vals_bg_2525e;
} else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_5222);
spec->channels = rf_vals_5222;
- spec->num_modes = 3;
}
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 7a83e0a..e315d79 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -392,30 +392,38 @@ static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
return (struct rt2x00_intf *)vif->drv_priv;
}
-/*
+/**
+ * struct hw_mode_spec: Hardware specifications structure
+ *
* Details about the supported modes, rates and channels
* of a particular chipset. This is used by rt2x00lib
* to build the ieee80211_hw_mode array for mac80211.
+ *
+ * @supported_bands: Bitmask contained the supported bands (2.4GHz, 5.2GHz).
+ * @supported_rates: Rate types which are supported (CCK, OFDM).
+ * @num_channels: Number of supported channels. This is used as array size
+ * for @tx_power_a, @tx_power_bg and @channels.
+ * channels: Device/chipset specific channel values (See &struct rf_channel).
+ * @tx_power_a: TX power values for all 5.2GHz channels (may be NULL).
+ * @tx_power_bg: TX power values for all 2.4GHz channels (may be NULL).
+ * @tx_power_default: Default TX power value to use when either
+ * @tx_power_a or @tx_power_bg is missing.
*/
struct hw_mode_spec {
- /*
- * Number of modes, rates and channels.
- */
- int num_modes;
- int num_rates;
- int num_channels;
+ unsigned int supported_bands;
+#define SUPPORT_BAND_2GHZ 0x00000001
+#define SUPPORT_BAND_5GHZ 0x00000002
+
+ unsigned int supported_rates;
+#define SUPPORT_RATE_CCK 0x00000001
+#define SUPPORT_RATE_OFDM 0x00000002
+
+ unsigned int num_channels;
+ const struct rf_channel *channels;
- /*
- * txpower values.
- */
const u8 *tx_power_a;
const u8 *tx_power_bg;
u8 tx_power_default;
-
- /*
- * Device/chipset specific value.
- */
- const struct rf_channel *channels;
};
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 3e9e61d..6103175 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -764,25 +764,25 @@ EXPORT_SYMBOL_GPL(rt2x00lib_write_tx_desc);
*/
const struct rt2x00_rate rt2x00_supported_rates[12] = {
{
- .flags = 0,
+ .flags = DEV_RATE_CCK,
.bitrate = 10,
.ratemask = DEV_RATEMASK_1MB,
.plcp = 0x00,
},
{
- .flags = DEV_RATE_SHORT_PREAMBLE,
+ .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
.bitrate = 20,
.ratemask = DEV_RATEMASK_2MB,
.plcp = 0x01,
},
{
- .flags = DEV_RATE_SHORT_PREAMBLE,
+ .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
.bitrate = 55,
.ratemask = DEV_RATEMASK_5_5MB,
.plcp = 0x02,
},
{
- .flags = DEV_RATE_SHORT_PREAMBLE,
+ .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
.bitrate = 110,
.ratemask = DEV_RATEMASK_11MB,
.plcp = 0x03,
@@ -865,67 +865,64 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
struct hw_mode_spec *spec)
{
struct ieee80211_hw *hw = rt2x00dev->hw;
- struct ieee80211_supported_band *sbands;
struct ieee80211_channel *channels;
struct ieee80211_rate *rates;
+ unsigned int num_rates;
unsigned int i;
unsigned char tx_power;
- sbands = &rt2x00dev->bands[0];
+ num_rates = 0;
+ if (spec->supported_rates & SUPPORT_RATE_CCK)
+ num_rates += 4;
+ if (spec->supported_rates & SUPPORT_RATE_OFDM)
+ num_rates += 8;
channels = kzalloc(sizeof(*channels) * spec->num_channels, GFP_KERNEL);
if (!channels)
return -ENOMEM;
- rates = kzalloc(sizeof(*rates) * spec->num_rates, GFP_KERNEL);
+ rates = kzalloc(sizeof(*rates) * num_rates, GFP_KERNEL);
if (!rates)
goto exit_free_channels;
/*
* Initialize Rate list.
*/
- for (i = 0; i < spec->num_rates; i++)
+ for (i = 0; i < num_rates; i++)
rt2x00lib_rate(&rates[i], i, rt2x00_get_rate(i));
/*
* Initialize Channel list.
*/
for (i = 0; i < spec->num_channels; i++) {
- if (spec->channels[i].channel <= 14)
- tx_power = spec->tx_power_bg[i];
- else if (spec->tx_power_a)
- tx_power = spec->tx_power_a[i];
- else
- tx_power = spec->tx_power_default;
+ if (spec->channels[i].channel <= 14) {
+ if (spec->tx_power_bg)
+ tx_power = spec->tx_power_bg[i];
+ else
+ tx_power = spec->tx_power_default;
+ } else {
+ if (spec->tx_power_a)
+ tx_power = spec->tx_power_a[i];
+ else
+ tx_power = spec->tx_power_default;
+ }
rt2x00lib_channel(&channels[i],
spec->channels[i].channel, tx_power, i);
}
/*
- * Intitialize 802.11b
- * Rates: CCK.
- * Channels: 2.4 GHz
- */
- if (spec->num_modes > 0) {
- sbands[IEEE80211_BAND_2GHZ].n_channels = 14;
- sbands[IEEE80211_BAND_2GHZ].n_bitrates = 4;
- sbands[IEEE80211_BAND_2GHZ].channels = channels;
- sbands[IEEE80211_BAND_2GHZ].bitrates = rates;
- hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &rt2x00dev->bands[IEEE80211_BAND_2GHZ];
- }
-
- /*
- * Intitialize 802.11g
+ * Intitialize 802.11b, 802.11g
* Rates: CCK, OFDM.
* Channels: 2.4 GHz
*/
- if (spec->num_modes > 1) {
- sbands[IEEE80211_BAND_2GHZ].n_channels = 14;
- sbands[IEEE80211_BAND_2GHZ].n_bitrates = spec->num_rates;
- sbands[IEEE80211_BAND_2GHZ].channels = channels;
- sbands[IEEE80211_BAND_2GHZ].bitrates = rates;
- hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &rt2x00dev->bands[IEEE80211_BAND_2GHZ];
+ if (spec->supported_bands > SUPPORT_BAND_2GHZ) {
+ rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_channels = 14;
+ rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_bitrates = num_rates;
+ rt2x00dev->bands[IEEE80211_BAND_2GHZ].channels = channels;
+ rt2x00dev->bands[IEEE80211_BAND_2GHZ].bitrates = rates;
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+ &rt2x00dev->bands[IEEE80211_BAND_2GHZ];
}
/*
@@ -933,12 +930,15 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
* Rates: OFDM.
* Channels: OFDM, UNII, HiperLAN2.
*/
- if (spec->num_modes > 2) {
- sbands[IEEE80211_BAND_5GHZ].n_channels = spec->num_channels - 14;
- sbands[IEEE80211_BAND_5GHZ].n_bitrates = spec->num_rates - 4;
- sbands[IEEE80211_BAND_5GHZ].channels = &channels[14];
- sbands[IEEE80211_BAND_5GHZ].bitrates = &rates[4];
- hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &rt2x00dev->bands[IEEE80211_BAND_5GHZ];
+ if (spec->supported_bands > SUPPORT_BAND_5GHZ) {
+ rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_channels =
+ spec->num_channels - 14;
+ rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_bitrates =
+ num_rates - 4;
+ rt2x00dev->bands[IEEE80211_BAND_5GHZ].channels = &channels[14];
+ rt2x00dev->bands[IEEE80211_BAND_5GHZ].bitrates = &rates[4];
+ hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+ &rt2x00dev->bands[IEEE80211_BAND_5GHZ];
}
return 0;
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 2a611e4..34ccb3d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -38,8 +38,9 @@
*/
struct rt2x00_rate {
unsigned short flags;
-#define DEV_RATE_OFDM 0x0001
-#define DEV_RATE_SHORT_PREAMBLE 0x0002
+#define DEV_RATE_CCK 0x0001
+#define DEV_RATE_OFDM 0x0002
+#define DEV_RATE_SHORT_PREAMBLE 0x0004
unsigned short bitrate; /* In 100kbit/s */
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 3b10452..70cfdad 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2205,8 +2205,8 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw_mode information.
*/
- spec->num_modes = 2;
- spec->num_rates = 12;
+ spec->supported_bands = SUPPORT_BAND_2GHZ;
+ spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
spec->tx_power_a = NULL;
spec->tx_power_bg = txpower;
spec->tx_power_default = DEFAULT_TXPOWER;
@@ -2221,7 +2221,7 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
rt2x00_rf(&rt2x00dev->chip, RF5325)) {
- spec->num_modes = 3;
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_seq);
txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 43f5676..cae4b02 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1787,8 +1787,8 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw_mode information.
*/
- spec->num_modes = 2;
- spec->num_rates = 12;
+ spec->supported_bands = SUPPORT_BAND_2GHZ;
+ spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
spec->tx_power_a = NULL;
spec->tx_power_bg = txpower;
spec->tx_power_default = DEFAULT_TXPOWER;
@@ -1797,20 +1797,20 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
spec->channels = rf_vals_bg_2528;
} else if (rt2x00_rf(&rt2x00dev->chip, RF5226)) {
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_5226);
spec->channels = rf_vals_5226;
} else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) {
spec->num_channels = 14;
spec->channels = rf_vals_5225_2527;
} else if (rt2x00_rf(&rt2x00dev->chip, RF5225)) {
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_5225_2527);
spec->channels = rf_vals_5225_2527;
}
if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
rt2x00_rf(&rt2x00dev->chip, RF5226)) {
- spec->num_modes = 3;
-
txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
for (i = 0; i < 14; i++)
txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
--
1.5.4
-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
