On Mon, 2013-11-04 at 20:42 +0200, Beeblebrox wrote: > > What kind of access point are you trying to connect to? These devices > > only support 802.11b, so if the access point is newer and is using > > 802.11n, there are some 11n configurations that simply don't support > > connections from 11b clients. > > Dan > > Hi Dan, thanks for your answer. > The test A/P is a USR-5451-maxG with ddwrt as OS. A/P is on mixed mode > (B+G), but after your mail I tried B-Only mode, which failed also. > While observing the connection process, I got the feeling that the > orinoco card (eth1) is unable to set an IP. I have tried static and > dhclient, with same effect. Shortly after the connection process > starts, the card status shows as connected, but does not finalize . > Process then terminates (assuming because no IP is agreed on with AP). > > Please advise what other info/test I can try. If you're able, can you use wireshark on another computer to capture the 802.11 frames exchanged between the orinico device and the AP? Dan -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
