From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx> Currently, the PLL is turned off for AR9485 when switching to a low power state, but AR9485 has an issue where the card will become unresponsive if left idle for a long time without any traffic. To fix this, force the PLL to always be on using a different initval array, ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1. Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx> --- drivers/net/wireless/ath/ath9k/ar9003_hw.c | 11 ++------ drivers/net/wireless/ath/ath9k/ar9485_initvals.h | 35 +++++------------------- 2 files changed, 9 insertions(+), 37 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c index 42daea5..b054dee 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c @@ -187,17 +187,10 @@ static void ar9003_hw_init_mode_regs(struct ath_hw *ah) INIT_INI_ARRAY(&ah->iniCckfirJapan2484, ar9485_1_1_baseband_core_txfir_coeff_japan_2484); - /* Load PCIE SERDES settings from INI */ - - /* Awake Setting */ - INIT_INI_ARRAY(&ah->iniPcieSerdes, - ar9485_1_1_pcie_phy_clkreq_disable_L1); - - /* Sleep Setting */ - + ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1); INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower, - ar9485_1_1_pcie_phy_clkreq_disable_L1); + ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1); } else if (AR_SREV_9462_21(ah)) { INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE], ar9462_2p1_mac_core); diff --git a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h index 6f899c6..93b18ce 100644 --- a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h @@ -32,13 +32,6 @@ static const u32 ar9485_1_1_mac_postamble[][5] = { {0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440}, }; -static const u32 ar9485_1_1_pcie_phy_pll_on_clkreq_disable_L1[][2] = { - /* Addr allmodes */ - {0x00018c00, 0x18012e5e}, - {0x00018c04, 0x000801d8}, - {0x00018c08, 0x0000080c}, -}; - static const u32 ar9485Common_wo_xlna_rx_gain_1_1[][2] = { /* Addr allmodes */ {0x00009e00, 0x037216a0}, @@ -1101,20 +1094,6 @@ static const u32 ar9485_common_rx_gain_1_1[][2] = { {0x0000a1fc, 0x00000296}, }; -static const u32 ar9485_1_1_pcie_phy_pll_on_clkreq_enable_L1[][2] = { - /* Addr allmodes */ - {0x00018c00, 0x18052e5e}, - {0x00018c04, 0x000801d8}, - {0x00018c08, 0x0000080c}, -}; - -static const u32 ar9485_1_1_pcie_phy_clkreq_enable_L1[][2] = { - /* Addr allmodes */ - {0x00018c00, 0x18053e5e}, - {0x00018c04, 0x000801d8}, - {0x00018c08, 0x0000080c}, -}; - static const u32 ar9485_1_1_soc_preamble[][2] = { /* Addr allmodes */ {0x00004014, 0xba280400}, @@ -1173,13 +1152,6 @@ static const u32 ar9485_1_1_baseband_postamble[][5] = { {0x0000be18, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, }; -static const u32 ar9485_1_1_pcie_phy_clkreq_disable_L1[][2] = { - /* Addr allmodes */ - {0x00018c00, 0x18013e5e}, - {0x00018c04, 0x000801d8}, - {0x00018c08, 0x0000080c}, -}; - static const u32 ar9485_1_1_radio_postamble[][2] = { /* Addr allmodes */ {0x0001609c, 0x0b283f31}, @@ -1358,4 +1330,11 @@ static const u32 ar9485_1_1_baseband_core_txfir_coeff_japan_2484[][2] = { {0x0000a3a0, 0xca9228ee}, }; +static const u32 ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1[][2] = { + /* Addr allmodes */ + {0x00018c00, 0x1801265e}, + {0x00018c04, 0x000801d8}, + {0x00018c08, 0x0000080c}, +}; + #endif /* INITVALS_9485_H */ -- 1.8.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html