Use the appropriate helper functions instead of
directly accessing the rt2x00dev->cap_flags field
to check device capability flags.
This improves readability of the code a bit.
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@xxxxxxxxxxx>
---
drivers/net/wireless/rt2x00/rt73usb.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 1d3880e..1baf9c8 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -595,8 +595,8 @@ static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
switch (ant->rx) {
case ANTENNA_HW_DIVERSITY:
rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
- temp = !test_bit(CAPABILITY_FRAME_TYPE, &rt2x00dev->cap_flags)
- && (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ);
+ temp = !rt2x00_has_cap_frame_type(rt2x00dev) &&
+ (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, temp);
break;
case ANTENNA_A:
@@ -636,7 +636,7 @@ static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
- !test_bit(CAPABILITY_FRAME_TYPE, &rt2x00dev->cap_flags));
+ !rt2x00_has_cap_frame_type(rt2x00dev));
/*
* Configure the RX antenna.
@@ -709,10 +709,10 @@ static void rt73usb_config_ant(struct rt2x00_dev *rt2x00dev,
if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
sel = antenna_sel_a;
- lna = test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags);
+ lna = rt2x00_has_cap_external_lna_a(rt2x00dev);
} else {
sel = antenna_sel_bg;
- lna = test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags);
+ lna = rt2x00_has_cap_external_lna_bg(rt2x00dev);
}
for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
@@ -740,7 +740,7 @@ static void rt73usb_config_lna_gain(struct rt2x00_dev *rt2x00dev,
short lna_gain = 0;
if (libconf->conf->chandef.chan->band == IEEE80211_BAND_2GHZ) {
- if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags))
+ if (rt2x00_has_cap_external_lna_bg(rt2x00dev))
lna_gain += 14;
rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
@@ -930,7 +930,7 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev,
low_bound = 0x28;
up_bound = 0x48;
- if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags)) {
+ if (rt2x00_has_cap_external_lna_a(rt2x00dev)) {
low_bound += 0x10;
up_bound += 0x10;
}
@@ -946,7 +946,7 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev,
up_bound = 0x1c;
}
- if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags)) {
+ if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
low_bound += 0x14;
up_bound += 0x10;
}
@@ -1661,7 +1661,7 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
}
if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
- if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags)) {
+ if (rt2x00_has_cap_external_lna_a(rt2x00dev)) {
if (lna == 3 || lna == 2)
offset += 10;
} else {
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
