Use the appropriate helper functions instead of directly accessing the rt2x00dev->cap_flags field to check device capability flags. This improves readability of the code a bit. Signed-off-by: Gabor Juhos <juhosg@xxxxxxxxxxx> --- drivers/net/wireless/rt2x00/rt2800lib.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index a114cab..78b31e3 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1780,7 +1780,7 @@ void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant) rt2800_bbp_read(rt2x00dev, 3, &r3); if (rt2x00_rt(rt2x00dev, RT3572) && - test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) + rt2x00_has_cap_bt_coexist(rt2x00dev)) rt2800_config_3572bt_ant(rt2x00dev); /* @@ -1792,7 +1792,7 @@ void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant) break; case 2: if (rt2x00_rt(rt2x00dev, RT3572) && - test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) + rt2x00_has_cap_bt_coexist(rt2x00dev)) rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 1); else rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); @@ -1822,7 +1822,7 @@ void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant) break; case 2: if (rt2x00_rt(rt2x00dev, RT3572) && - test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) { + rt2x00_has_cap_bt_coexist(rt2x00dev)) { rt2x00_set_field8(&r3, BBP3_RX_ADC, 1); rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, rt2x00dev->curr_band == IEEE80211_BAND_5GHZ); @@ -2131,7 +2131,7 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev, rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0); rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0); rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0); - if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_bt_coexist(rt2x00dev)) { if (rf->channel <= 14) { rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1); rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1); @@ -2664,7 +2664,7 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev, if (rf->channel <= 14) { int idx = rf->channel-1; - if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_bt_coexist(rt2x00dev)) { if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) { /* r55/r59 value array of channel 1~14 */ static const char r55_bt_rev[] = {0x83, 0x83, @@ -3210,8 +3210,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, if (rf->channel <= 14) { if (!rt2x00_rt(rt2x00dev, RT5390) && !rt2x00_rt(rt2x00dev, RT5392)) { - if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, - &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { rt2800_bbp_write(rt2x00dev, 82, 0x62); rt2800_bbp_write(rt2x00dev, 75, 0x46); } else { @@ -3236,7 +3235,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, if (rt2x00_rt(rt2x00dev, RT3593)) rt2800_bbp_write(rt2x00dev, 83, 0x9a); - if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_external_lna_a(rt2x00dev)) rt2800_bbp_write(rt2x00dev, 75, 0x46); else rt2800_bbp_write(rt2x00dev, 75, 0x50); @@ -3272,7 +3271,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, /* Turn on primary PAs */ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14); - if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_bt_coexist(rt2x00dev)) rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1); else rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, @@ -3574,7 +3573,7 @@ static int rt2800_get_txpower_reg_delta(struct rt2x00_dev *rt2x00dev, { int delta; - if (test_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_power_limit(rt2x00dev)) return 0; /* @@ -3603,7 +3602,7 @@ static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b, if (rt2x00_rt(rt2x00dev, RT3593)) return min_t(u8, txpower, 0xc); - if (test_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_power_limit(rt2x00dev)) { /* * Check if eirp txpower exceed txpower_limit. * We use OFDM 6M as criterion and its eirp txpower @@ -5524,7 +5523,7 @@ static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev) ant = (div_mode == 3) ? 1 : 0; /* check if this is a Bluetooth combo card */ - if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_bt_coexist(rt2x00dev)) { u32 reg; rt2800_register_read(rt2x00dev, GPIO_CTRL, ®); @@ -5833,7 +5832,7 @@ static void rt2800_normal_mode_setup_3xxx(struct rt2x00_dev *rt2x00dev) rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) || rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) || rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) { - if (!test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags)) + if (!rt2x00_has_cap_external_lna_bg(rt2x00dev)) rt2x00_set_field8(&rfcsr, RFCSR17_R, 1); } -- 1.7.10 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html