Preparation for adding the scanning state machine to ath9k
Signed-off-by: Felix Fietkau <nbd@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/main.c | 150 ++++++++++++++++++----------------
1 file changed, 78 insertions(+), 72 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 2a86047..bc89823 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -312,17 +312,91 @@ out:
* by reseting the chip. To accomplish this we must first cleanup any pending
* DMA, then restart stuff.
*/
-static int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
- struct ath9k_channel *hchan)
+static int ath_set_channel(struct ath_softc *sc, struct cfg80211_chan_def *chandef)
{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ieee80211_hw *hw = sc->hw;
+ struct ath9k_channel *hchan;
+ struct ieee80211_channel *chan = chandef->chan;
+ unsigned long flags;
+ bool offchannel;
+ int pos = chan->hw_value;
+ int old_pos = -1;
int r;
if (test_bit(SC_OP_INVALID, &sc->sc_flags))
return -EIO;
+ offchannel = !!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL);
+
+ if (ah->curchan)
+ old_pos = ah->curchan - &ah->channels[0];
+
+ ath_dbg(common, CONFIG, "Set channel: %d MHz width: %d\n",
+ chan->center_freq, chandef->width);
+
+ /* update survey stats for the old channel before switching */
+ spin_lock_irqsave(&common->cc_lock, flags);
+ ath_update_survey_stats(sc);
+ spin_unlock_irqrestore(&common->cc_lock, flags);
+
+ ath9k_cmn_get_channel(hw, ah, chandef);
+
+ /*
+ * If the operating channel changes, change the survey in-use flags
+ * along with it.
+ * Reset the survey data for the new channel, unless we're switching
+ * back to the operating channel from an off-channel operation.
+ */
+ if (!offchannel && sc->cur_survey != &sc->survey[pos]) {
+ if (sc->cur_survey)
+ sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE;
+
+ sc->cur_survey = &sc->survey[pos];
+
+ memset(sc->cur_survey, 0, sizeof(struct survey_info));
+ sc->cur_survey->filled |= SURVEY_INFO_IN_USE;
+ } else if (!(sc->survey[pos].filled & SURVEY_INFO_IN_USE)) {
+ memset(&sc->survey[pos], 0, sizeof(struct survey_info));
+ }
+
+ hchan = &sc->sc_ah->channels[pos];
r = ath_reset_internal(sc, hchan);
+ if (r)
+ return r;
- return r;
+ /*
+ * The most recent snapshot of channel->noisefloor for the old
+ * channel is only available after the hardware reset. Copy it to
+ * the survey stats now.
+ */
+ if (old_pos >= 0)
+ ath_update_survey_nf(sc, old_pos);
+
+ /*
+ * Enable radar pulse detection if on a DFS channel. Spectral
+ * scanning and radar detection can not be used concurrently.
+ */
+ if (hw->conf.radar_enabled) {
+ u32 rxfilter;
+
+ /* set HW specific DFS configuration */
+ ath9k_hw_set_radar_params(ah);
+ rxfilter = ath9k_hw_getrxfilter(ah);
+ rxfilter |= ATH9K_RX_FILTER_PHYRADAR |
+ ATH9K_RX_FILTER_PHYERR;
+ ath9k_hw_setrxfilter(ah, rxfilter);
+ ath_dbg(common, DFS, "DFS enabled at freq %d\n",
+ chan->center_freq);
+ } else {
+ /* perform spectral scan if requested. */
+ if (test_bit(SC_OP_SCANNING, &sc->sc_flags) &&
+ sc->spectral_mode == SPECTRAL_CHANSCAN)
+ ath9k_spectral_scan_trigger(hw);
+ }
+
+ return 0;
}
static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta,
@@ -1207,80 +1281,12 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
}
if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || reset_channel) {
- struct ieee80211_channel *curchan = hw->conf.chandef.chan;
- int pos = curchan->hw_value;
- int old_pos = -1;
- unsigned long flags;
-
- if (ah->curchan)
- old_pos = ah->curchan - &ah->channels[0];
-
- ath_dbg(common, CONFIG, "Set channel: %d MHz width: %d\n",
- curchan->center_freq, hw->conf.chandef.width);
-
- /* update survey stats for the old channel before switching */
- spin_lock_irqsave(&common->cc_lock, flags);
- ath_update_survey_stats(sc);
- spin_unlock_irqrestore(&common->cc_lock, flags);
-
- ath9k_cmn_get_channel(hw, ah, &conf->chandef);
-
- /*
- * If the operating channel changes, change the survey in-use flags
- * along with it.
- * Reset the survey data for the new channel, unless we're switching
- * back to the operating channel from an off-channel operation.
- */
- if (!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) &&
- sc->cur_survey != &sc->survey[pos]) {
-
- if (sc->cur_survey)
- sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE;
-
- sc->cur_survey = &sc->survey[pos];
-
- memset(sc->cur_survey, 0, sizeof(struct survey_info));
- sc->cur_survey->filled |= SURVEY_INFO_IN_USE;
- } else if (!(sc->survey[pos].filled & SURVEY_INFO_IN_USE)) {
- memset(&sc->survey[pos], 0, sizeof(struct survey_info));
- }
-
- if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) {
+ if (ath_set_channel(sc, &hw->conf.chandef) < 0) {
ath_err(common, "Unable to set channel\n");
mutex_unlock(&sc->mutex);
ath9k_ps_restore(sc);
return -EINVAL;
}
-
- /*
- * The most recent snapshot of channel->noisefloor for the old
- * channel is only available after the hardware reset. Copy it to
- * the survey stats now.
- */
- if (old_pos >= 0)
- ath_update_survey_nf(sc, old_pos);
-
- /*
- * Enable radar pulse detection if on a DFS channel. Spectral
- * scanning and radar detection can not be used concurrently.
- */
- if (hw->conf.radar_enabled) {
- u32 rxfilter;
-
- /* set HW specific DFS configuration */
- ath9k_hw_set_radar_params(ah);
- rxfilter = ath9k_hw_getrxfilter(ah);
- rxfilter |= ATH9K_RX_FILTER_PHYRADAR |
- ATH9K_RX_FILTER_PHYERR;
- ath9k_hw_setrxfilter(ah, rxfilter);
- ath_dbg(common, DFS, "DFS enabled at freq %d\n",
- curchan->center_freq);
- } else {
- /* perform spectral scan if requested. */
- if (test_bit(SC_OP_SCANNING, &sc->sc_flags) &&
- sc->spectral_mode == SPECTRAL_CHANSCAN)
- ath9k_spectral_scan_trigger(hw);
- }
}
if (changed & IEEE80211_CONF_CHANGE_POWER) {
--
1.8.0.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
