The hardware is always configured with OFDM support enabled
Signed-off-by: Felix Fietkau <nbd@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/hw.c | 8 ++------
drivers/net/wireless/ath/ath9k/hw.h | 1 -
2 files changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 34c8e2e..40a1132 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1544,9 +1544,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah,
ath9k_hw_set_clockrate(ah);
ath9k_hw_apply_txpower(ah, chan, false);
- if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan))
- ath9k_hw_set_delta_slope(ah, chan);
-
+ ath9k_hw_set_delta_slope(ah, chan);
ath9k_hw_spur_mitigate_freq(ah, chan);
if (band_switch || ini_reloaded)
@@ -1981,9 +1979,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
ath9k_hw_init_mfp(ah);
- if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan))
- ath9k_hw_set_delta_slope(ah, chan);
-
+ ath9k_hw_set_delta_slope(ah, chan);
ath9k_hw_spur_mitigate_freq(ah, chan);
ah->eep_ops->set_board_values(ah, chan);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index eaaf98b..0e44693 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -445,7 +445,6 @@ struct ath9k_channel {
(((_c)->channelFlags & CHANNEL_G_HT20) == CHANNEL_G_HT20) || \
(((_c)->channelFlags & CHANNEL_G_HT40PLUS) == CHANNEL_G_HT40PLUS) || \
(((_c)->channelFlags & CHANNEL_G_HT40MINUS) == CHANNEL_G_HT40MINUS))
-#define IS_CHAN_OFDM(_c) (((_c)->channelFlags & CHANNEL_OFDM) != 0)
#define IS_CHAN_5GHZ(_c) (((_c)->channelFlags & CHANNEL_5GHZ) != 0)
#define IS_CHAN_2GHZ(_c) (((_c)->channelFlags & CHANNEL_2GHZ) != 0)
#define IS_CHAN_HALF_RATE(_c) (((_c)->channelFlags & CHANNEL_HALF) != 0)
--
1.8.0.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
