Update rf registers to use the same values that the MediaTek/Ralink
reference driver DPO_RT5572_LinuxSTA_2.6.1.3_20121022 uses.
References:
RF5390RegTable in chips/rt5390.c
RF5392RegTable in chips/rt5390.c
Tested on TP-Link TL-WN727N and D-Link DWA-140 Rev.b3 usb wifi dongles.
Signed-off-by: Kevin Lo <kevlo@xxxxxxxxx>
---
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c
b/drivers/net/wireless/rt2x00/rt2800lib.c
index f414978..0bbd1b5 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -6449,7 +6449,7 @@ static void rt2800_init_rfcsr_5390(struct
rt2x00_dev *rt2x00dev)
rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
- rt2800_rfcsr_write(rt2x00dev, 30, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
@@ -6487,7 +6487,7 @@ static void rt2800_init_rfcsr_5390(struct
rt2x00_dev *rt2x00dev)
rt2800_rfcsr_write(rt2x00dev, 56, 0x22);
rt2800_rfcsr_write(rt2x00dev, 57, 0x80);
rt2800_rfcsr_write(rt2x00dev, 58, 0x7f);
- rt2800_rfcsr_write(rt2x00dev, 59, 0x63);
+ rt2800_rfcsr_write(rt2x00dev, 59, 0x8f);
rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
@@ -6507,7 +6507,6 @@ static void rt2800_init_rfcsr_5392(struct
rt2x00_dev *rt2x00dev)
rt2800_rf_init_calibration(rt2x00dev, 2);
rt2800_rfcsr_write(rt2x00dev, 1, 0x17);
- rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
rt2800_rfcsr_write(rt2x00dev, 3, 0x88);
rt2800_rfcsr_write(rt2x00dev, 5, 0x10);
rt2800_rfcsr_write(rt2x00dev, 6, 0xe0);
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html