These are the patches required to support Mesh Basic Service Set (MBSS)
channel switch.
The design is more or less same with the IBSS. Additional procedures
or elements that are required for mesh operation are as follow:
* Add additional information element (IE) known as Mesh Channel Switch
Parameters (MCSP) required in CSA action, beacon and probe response
frames.
* Forwarding of CSA frame if the conditions defined in the standard
are met.
Limitations:
* Channel switch is only allow for the same band and also same channel
width from the previous setting.
These patches are reviewed and commented by Bob Copeland, Thomas Pedersen
and Johannes Berg. Any further comments are welcomed.
Chun-Yeow Yeoh (5):
mac80211: process the CSA frame for mesh accordingly
{nl,cfg,mac}80211: enable the triggering of CSA frame in mesh
mac80211: add the CSA and MCSP elements in mesh beaconing
{nl,cfg,mac}80211: finalizing mesh channel switching
mac80211: process mesh channel switching using beacon
include/linux/ieee80211.h | 20 +++
include/net/cfg80211.h | 4 +
net/mac80211/Kconfig | 11 ++
net/mac80211/cfg.c | 24 ++++
net/mac80211/debug.h | 10 ++
net/mac80211/ibss.c | 60 +--------
net/mac80211/ieee80211_i.h | 21 +++-
net/mac80211/mesh.c | 289 +++++++++++++++++++++++++++++++++++++++++++-
net/mac80211/mlme.c | 30 +++--
net/mac80211/rx.c | 5 +-
net/mac80211/spectmgmt.c | 33 +++--
net/mac80211/tx.c | 16 +++
net/mac80211/util.c | 96 +++++++++++++++
net/wireless/nl80211.c | 4 +-
14 files changed, 526 insertions(+), 97 deletions(-)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
