From: Amitkumar Karwar <akarwar@xxxxxxxxxxx>
A text file containing calibration data in hex format can
be provided at following path:
/lib/firmware/mrvl/sd8797_caldata.conf
The data will be downloaded to firmware during initialization.
Reviewed-by: Mike Frysinger <vapier@xxxxxxxxxxxx>
Signed-off-by: Amitkumar Karwar <akarwar@xxxxxxxxxxx>
Signed-off-by: Bing Zhao <bzhao@xxxxxxxxxxx>
Signed-off-by: Hyuckjoo Lee <hyuckjoo.lee@xxxxxxxxxxx>
---
v2: Remove module parameter. The calibration data will be downloaded
only when the device speicific data file is provided.
(Marcel Holtmann)
v3: Fix crash (misaligned memory access) on ARM
v4: Simplify white space parsing and save some CPU cycles (Mike Frysinger)
v5: Improvements in cal data parsing logic. Add explanatory comments.
Replace GFP_ATOMIC flag with GFP_KERNEL (Mike Frysinger)
v6: Remove redundant label 'done' and 'cfg' check, and a new line character check
(Mike Frysinger)
Use btmrvl_send_sync_cmd() for downloading calibration data.
(Marcel Holtmann)
drivers/bluetooth/btmrvl_drv.h | 8 +++
drivers/bluetooth/btmrvl_main.c | 116 ++++++++++++++++++++++++++++++++++++++++
drivers/bluetooth/btmrvl_sdio.c | 9 +++-
drivers/bluetooth/btmrvl_sdio.h | 2 +
4 files changed, 134 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
index 42f7028..f9d1833 100644
--- a/drivers/bluetooth/btmrvl_drv.h
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -23,6 +23,8 @@
#include <linux/bitops.h>
#include <linux/slab.h>
#include <net/bluetooth/bluetooth.h>
+#include <linux/ctype.h>
+#include <linux/firmware.h>
#define BTM_HEADER_LEN 4
#define BTM_UPLD_SIZE 2312
@@ -41,6 +43,8 @@ struct btmrvl_thread {
struct btmrvl_device {
void *card;
struct hci_dev *hcidev;
+ struct device *dev;
+ const char *cal_data;
u8 dev_type;
@@ -91,6 +95,7 @@ struct btmrvl_private {
#define BT_CMD_HOST_SLEEP_CONFIG 0x59
#define BT_CMD_HOST_SLEEP_ENABLE 0x5A
#define BT_CMD_MODULE_CFG_REQ 0x5B
+#define BT_CMD_LOAD_CONFIG_DATA 0x61
/* Sub-commands: Module Bringup/Shutdown Request/Response */
#define MODULE_BRINGUP_REQ 0xF1
@@ -116,6 +121,9 @@ struct btmrvl_private {
#define PS_SLEEP 0x01
#define PS_AWAKE 0x00
+#define BT_CMD_DATA_SIZE 32
+#define BT_CAL_DATA_SIZE 28
+
struct btmrvl_event {
u8 ec; /* event counter */
u8 length;
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index e0ae1f4..6e7bd4e 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -432,12 +432,128 @@ static int btmrvl_open(struct hci_dev *hdev)
return 0;
}
+/*
+ * This function parses provided calibration data input. It should contain
+ * hex bytes separated by space or new line character. Here is an example.
+ * 00 1C 01 37 FF FF FF FF 02 04 7F 01
+ * CE BA 00 00 00 2D C6 C0 00 00 00 00
+ * 00 F0 00 00
+ */
+static int btmrvl_parse_cal_cfg(const u8 *src, u32 len, u8 *dst, u32 dst_size)
+{
+ const u8 *s = src;
+ u8 *d = dst;
+ int ret;
+ u8 tmp[3];
+
+ tmp[2] = '\0';
+ while ((s - src) <= len - 2) {
+ if (isspace(*s)) {
+ s++;
+ continue;
+ }
+
+ if (isxdigit(*s)) {
+ if ((d - dst) >= dst_size) {
+ BT_ERR("calibration data file too big!!!");
+ return -EINVAL;
+ }
+
+ memcpy(tmp, s, 2);
+
+ ret = kstrtou8(tmp, 16, d++);
+ if (ret < 0)
+ return ret;
+
+ s += 2;
+ } else {
+ return -EINVAL;
+ }
+ }
+ if (d == dst)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int btmrvl_load_cal_data(struct btmrvl_private *priv,
+ u8 *config_data)
+{
+ int i, ret;
+ u8 data[BT_CMD_DATA_SIZE];
+
+ data[0] = 0x00;
+ data[1] = 0x00;
+ data[2] = 0x00;
+ data[3] = BT_CMD_DATA_SIZE - 4;
+
+ /* Swap cal-data bytes. Each four bytes are swapped. Considering 4
+ * byte SDIO header offset, mapping of input and output bytes will be
+ * {3, 2, 1, 0} -> {0+4, 1+4, 2+4, 3+4},
+ * {7, 6, 5, 4} -> {4+4, 5+4, 6+4, 7+4} */
+ for (i = 4; i < BT_CMD_DATA_SIZE; i++)
+ data[i] = config_data[(i / 4) * 8 - 1 - i];
+
+ print_hex_dump_bytes("Calibration data: ",
+ DUMP_PREFIX_OFFSET, data, BT_CMD_DATA_SIZE);
+
+ ret = btmrvl_send_sync_cmd(priv, BT_CMD_LOAD_CONFIG_DATA, data,
+ BT_CMD_DATA_SIZE);
+ if (ret)
+ BT_ERR("Failed to download caibration data\n");
+
+ return 0;
+}
+
+static int
+btmrvl_process_cal_cfg(struct btmrvl_private *priv, u8 *data, u32 size)
+{
+ u8 cal_data[BT_CAL_DATA_SIZE];
+ int ret;
+
+ ret = btmrvl_parse_cal_cfg(data, size, cal_data, sizeof(cal_data));
+ if (ret)
+ return ret;
+
+ ret = btmrvl_load_cal_data(priv, cal_data);
+ if (ret) {
+ BT_ERR("Fail to load calibrate data");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int btmrvl_cal_data_config(struct btmrvl_private *priv)
+{
+ const struct firmware *cfg;
+ int ret;
+ const char *cal_data = priv->btmrvl_dev.cal_data;
+
+ if (!cal_data)
+ return 0;
+
+ ret = request_firmware(&cfg, cal_data, priv->btmrvl_dev.dev);
+ if (ret < 0) {
+ BT_DBG("Failed to get %s file, skipping cal data download",
+ cal_data);
+ return 0;
+ }
+
+ ret = btmrvl_process_cal_cfg(priv, (u8 *)cfg->data, cfg->size);
+ release_firmware(cfg);
+ return ret;
+}
+
static int btmrvl_setup(struct hci_dev *hdev)
{
struct btmrvl_private *priv = hci_get_drvdata(hdev);
btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ);
+ if (btmrvl_cal_data_config(priv))
+ BT_ERR("Set cal data failed");
+
priv->btmrvl_dev.psmode = 1;
btmrvl_enable_ps(priv);
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 5b70bcb..332475e 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -18,7 +18,6 @@
* this warranty disclaimer.
**/
-#include <linux/firmware.h>
#include <linux/slab.h>
#include <linux/mmc/sdio_ids.h>
@@ -102,6 +101,7 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_88xx = {
static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
.helper = "mrvl/sd8688_helper.bin",
.firmware = "mrvl/sd8688.bin",
+ .cal_data = NULL,
.reg = &btmrvl_reg_8688,
.sd_blksz_fw_dl = 64,
};
@@ -109,6 +109,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
.helper = NULL,
.firmware = "mrvl/sd8787_uapsta.bin",
+ .cal_data = NULL,
.reg = &btmrvl_reg_87xx,
.sd_blksz_fw_dl = 256,
};
@@ -116,6 +117,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
.helper = NULL,
.firmware = "mrvl/sd8797_uapsta.bin",
+ .cal_data = "mrvl/sd8797_caldata.conf",
.reg = &btmrvl_reg_87xx,
.sd_blksz_fw_dl = 256,
};
@@ -123,6 +125,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
.helper = NULL,
.firmware = "mrvl/sd8897_uapsta.bin",
+ .cal_data = NULL,
.reg = &btmrvl_reg_88xx,
.sd_blksz_fw_dl = 256,
};
@@ -1006,6 +1009,7 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
struct btmrvl_sdio_device *data = (void *) id->driver_data;
card->helper = data->helper;
card->firmware = data->firmware;
+ card->cal_data = data->cal_data;
card->reg = data->reg;
card->sd_blksz_fw_dl = data->sd_blksz_fw_dl;
}
@@ -1034,6 +1038,8 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
}
card->priv = priv;
+ priv->btmrvl_dev.dev = &card->func->dev;
+ priv->btmrvl_dev.cal_data = card->cal_data;
/* Initialize the interface specific function pointers */
priv->hw_host_to_card = btmrvl_sdio_host_to_card;
@@ -1216,4 +1222,5 @@ MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
MODULE_FIRMWARE("mrvl/sd8688.bin");
MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8797_caldata.conf");
MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h
index 43d35a6..6872d9e 100644
--- a/drivers/bluetooth/btmrvl_sdio.h
+++ b/drivers/bluetooth/btmrvl_sdio.h
@@ -85,6 +85,7 @@ struct btmrvl_sdio_card {
u32 ioport;
const char *helper;
const char *firmware;
+ const char *cal_data;
const struct btmrvl_sdio_card_reg *reg;
u16 sd_blksz_fw_dl;
u8 rx_unit;
@@ -94,6 +95,7 @@ struct btmrvl_sdio_card {
struct btmrvl_sdio_device {
const char *helper;
const char *firmware;
+ const char *cal_data;
const struct btmrvl_sdio_card_reg *reg;
u16 sd_blksz_fw_dl;
};
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
