The Ralink DPO_RT5572_LinuxSTA_2.6.1.3_20121022
reference driver uses different RSSI threshold
and VGC adjustment values for the RT3572 and for
the RT3593 chipsets.
Update the rt2800_link_tuner function to use the
same values. Also change the comment in the function
to make it more generic.
References:
RT35xx_ChipAGCAdjust function in chips/rt35xx.c
RSSI_FOR_MID_LOW_SENSIBILITY constant in include/chip/rtmp_phy.h
RT3593_R66_MID_LOW_SENS_GET macro in include/chip/rt3593.h
RT3593_R66_NON_MID_LOW_SEMS_GET macro in include/chips/rt3593.h
Signed-off-by: Gabor Juhos <juhosg@xxxxxxxxxxx>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 25c550a..0dd15b2 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4465,17 +4465,25 @@ void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C))
return;
- /*
- * When RSSI is better then -80 increase VGC level with 0x10, except
- * for rt5592 chip.
+
+ /* When RSSI is better than a certain threshold, increase VGC
+ * with a chip specific value in order to improve the balance
+ * between sensibility and noise isolation.
*/
vgc = rt2800_get_default_vgc(rt2x00dev);
- if (rt2x00_rt(rt2x00dev, RT5592) && qual->rssi > -65)
+ if ((rt2x00_rt(rt2x00dev, RT3572) ||
+ rt2x00_rt(rt2x00dev, RT3593)) && qual->rssi > -65) {
+ if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ)
+ vgc += 0x20;
+ else
+ vgc += 0x10;
+ } else if (rt2x00_rt(rt2x00dev, RT5592) && qual->rssi > -65) {
vgc += 0x20;
- else if (qual->rssi > -80)
+ } else if (qual->rssi > -80) {
vgc += 0x10;
+ }
rt2800_set_vgc(rt2x00dev, qual, vgc);
}
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
